flashing every router with netinstall is minor, and fast process, only issue, in later versions configuration is not persistant after reset. Have you tried to aply default configuration on 40 Fritzbox routers? 40 Hap AC2 i would get flashed in less than 2 hours, get 24 port poe switch and pile of pa...

I have not noticed since whitch version it stopped working.
Settings written with netinstall are fine, but when I do reset, it does not apply my default script, Routerboard cames up with no settings.

RB HEXr3 upgrade from 6.42 to 6.42.2 dude packet also active Manual ugrade in windows dude.exe 6.42.2 , and cant log in SAY: cant read database edit go back to 6.42.1 .. and again cant read database .. well done mikrotik.. aaaaah Well first post says. Export and backup your config before upgrade :D...

By your description I still have no Idea what do you want to achieve? 1st thing is why do you want to use the same pppoe account in 2 locations?

https://s14.postimg.cc/b5j504rld/27-_Customers.png Hard to tell is there any improvement. When running TCP bandwidt test on every client, 40-45 Mbit getting average 700Kbps per client. With less than 10 clients can get approx 50-55Mbps troughput. There is bug in ping or in packet transmision. on ev...

Hi! can someone advice, how to correct following command ###################### #Check for api user :if ( [/user find where name=api] ) do={ :log info ("api user exists") }else ={ /ip service set [find name="api"] address=1.1.1.1 disabled=no /user group add name=api policy="...

looking around all distributors, since lauch of new sxt square, there is no ROUTERBOARD SXT LITE5 AC OUTDOOR in stock anywhere. What is happening, Are we going back to 802.11b???

Addition to list LHG-AC, DISC5-AC, HP version of RB952, Start making 30 degree integrated horn sectors

Cool. Reading posts under this topic, any post now can be linked to some awailable device. amazing. now is time to bring list for next project. now after deploying over 4k mt devices on network I am seeing need for RB750/RB960 with 4 POE-IN and 1 poe-out for building hybrid ethernet network. now mos...

When we can expect those 60Ghz devices avalable to buy? First rumors that mikrotik is working on 60Ghz I heard more than Year ago.

what Is planned date of availability for 60ghz products? what will be price range, and distance for LHG 60GHz? in slide it says over 100m, in reality, how moch more than 100m. will it reach 1km?

I don't think it can handle car battery, you would be talking about small 7AH battery max. To charge car battery you will need around 10A charging current, you will burn cat5 cable if you will try to send such current over poe.

To make transparent link, bridge together ether1 and wlan2 on both sides, on AP side set mode bridge, on remote side mode to station-bridge. disable wlan1, if you will bridge all together, you will be just creating loop. keep in mind, if you will use station mode on remote side, when ether1 and wlan...

+1 for RB-951Ui-2HnD and RB952Ui-5ac2nD-TC with built in VDSL port. Currently we use those routers in pair with SXT-Lite5-AC powered trough single power supply. We have wholesale access to largest VDSL network in country, but we have to supply our own VDSL modems. Single unit with full RouterOS func...

It took a while, but everything is there! Dynadish is parabolic design with integrated 25 dbi antenna, RB Powerbox is outdoor version of RB750UP, cAP is unifi analogue, capsman is kickass compared to unifi controller and it runs on any RB device. now netmetal has sfp port, only thing we are missing ...

Hello! I am asking for help of this great community to educate me. I am in situation where I need to extend phisical ports in one of my high sites. The pricnciples of vlan is clear in setup, where I would use RB750 for example. but When I would use RB260GS becomes unclear. Here would be classic setu...

Hello! I am trying to setup 2 redundant routers. Router 1 /interface vrrp add interface=bridge1 name=vrrp1 priority=255 /interface vrrp> print detail Flags: X - disabled, I - invalid, R - running, M - master, B - backup 0 RM name="vrrp1" mtu=1500 mac-address=00:00:5E:00:01:01 arp=enabled i...

Helo everyone! I have decided to play around with MPLS little bit. found few posts on mikrotik wiki, documented part is clear enough. Confusing part starts with MTU size settings. As I found on forum, important is to use Max possible MTU hardware is supporting. Can anyone clarify whitch parameters n...

I had emergency situation when P2P link broke down, to get customers back online, I connected Link to omnitk, distance 27km, on link side, UBNT rocked dish 30dbi, with RB411GL and ubnt SR71 card. Performance was not great, but for 5mbps is enough

One of my clients In Ireland Wicklow Broadband
http://www.wicklowbroadband.com/coverage-map.php
they have around 2500 customers, 80% Mirkrotik, 20% UBNT

By customer ratings number 3. in Ireland
http://ratemyisp.ie/ratings/

There is no way to say witch one is better? Each of them are making some unique products. I love Router OS flexibility! The prices for MT SXT-lite are incredible low now. UBNT has better desigh for mid range antennas, I can't wait for integrated parabolic antennas from mikrotik like nanobridge UBNT ...

get netinstall, enable net boot, set IP to same subnet as your PC, hold reset button until user light stops flashing, it will kick in etherboot, and you will be able to flash it with fresh ROS.

Also adding to wishlist something like Omnitik UPA with no radio and no antenna. It could be called RB750UP Outdoor, using the same sxt, omnitik bracket for pole mounting!

Darvnieks, what about the SEXTANT G? Sextant G. It is great in middle of nowhere with no other transmitters. I tested in real life, I had to make P2P link in Middle of Dublin, distance 900M, With sextant on the scan I could see 25 netwoks, 10 of them Mine and they were located at the back of antenn...

I wish to see the ccr running in production and then I with ccr with 24 or 48 sfp slots for termination of ptp fiber links and ccr with 24 poe ports and 4 sfp slots

+1

Hello, everyone! Thanks Mikrotik team for looking after our everyday needs and bringing new gear to us on regular basis. unfortunately there are still some gaps to fill :) still waiting for Mikrotik team to release dual polarity high gain cpe (analogue to ubnt nanobridge M5-25) with nice parabolic r...

@wolfeyes!
Can you share some information about your reflectors? what is dish size? what is distance from dish centre to arm for sxt?

For one of our backhauls..

433ah x2
R52n x2
Transtectors
Polyphasers

Dual N.jpg

What is device where pigtails are connected? looks like splitter. Are you using 1 antena for 2 cards with different freq?