hello Atheer, Wireless Interactive AP (external) is very powerful in dealing with users connections in severe weather conditions especially heat (which is concentrated on Iraq during summer time) , we tested it with about 45 online users and it was great. its price as you know about 700-900 $ locall...

well, better than torch, I used packet sniffer to track the traffic and analyzed it with wireshark, it was just high p/s rate data transfer between my pc and MT, nothing outside my system. My computer is talking to mikrotik using TCP port 1063 and Mt responding with TCP port 8291.

hi, I have MT 2.9.41, my problem is that when I open winbox and go to tools ==> graphing, the public interface jumps immediately to high rates of both download and upload, those rate remain high even if I log off all the active users and it will not stop unless I would close the winbox. Has anyone f...

theoritically its OK ...assuming the ping replies between the two nodes of the bridge is perfect now limit his bandwidth by queue and show us what is happening

specify "the best way" in more detailed explanation

you can't, with cache (web proxy) integrated in Mikrotik as far as I know...you may use a seperate Unix or Linux computer with squid proxy installed in...and tune it .

MT is working as a hotspot I am using NAT on MT my internet router is a multi-component system, not a one piece yes the internet router is connected via a second ethernet port with MT the first port of MT is for private interface the private ip of MT is 192.168.100.1 mask 22 range of DHCP 100.1 to 1...

well dallas I know I can achieve it with a WDS setting , unfortunately there is no WDS in Senao access points (2.4 or 5.8 GHz). yes cmacneill I have a hotspot with the MT and its set perfectly. and as dallas said it would work with WDS, I ve already tested it with different trademark. the question i...

AP1, AP2 are Senao 5.8 GHz access points, they are set up to be a bridge with ad-hoc setting for each of them , the ping replies between them is OK . now I connected AP1 through a switch with MT and AP2 with a computer through a switch also. this computer gets IP easily from Mikrotik and pinging per...

I want to send bandwidth through a bridge, which consists of two 5.8 GHz Senao access points in two different locations. AP1 is connected by ethernet with Mikrotik in the same location , while AP2 is in another location, the ping replies between the AP's are perfect and the computers connected by et...

Well Naz, you should add at least the following rules to IP==> Web Proxy:- / ip web-proxy access add src-address=192.168.?.0/? action=allow comment="Allow Access from Local \ Network" disabled=no add dst-port=23-25 action=deny comment="block telnet & spam e-mail relaying" \ d...

well skillfull, I already closed my router from being a relay through web proxy rules ... and I will check this probobility again ..thanx

well ...my WAN interface is at different times of the day download and upload some amount of bandwidth that is not routed to the LAN interface or the web proxy , besides when I checked the queue list in queues , I found that this (profile --> servers-->hotspot) has a 380 MB of download and 200 MB of...

my "profile" of the "Servers" of the "hotspot" is eating a considerable amount of bandwidth ..
where does this bandwidth goes? however I can limit this bandwidth but would it effect the
performance of some functions of the MT? and how if the answer is yes ?

hi all i have an MT 2.9 connected through a switch to a wireless interactive AP which broadcast the internet service wirelessly to the neary by clients . the problem is that if a client want more than one (user name) whatever AP he has (Dlink 2000,Dlink 2100, Senao) he doesnt gain access to MT (or h...

hi guys

i noticed that the cache engine in 2.7 is better than 2.9 , do i have a problem of some kind? or its a common bug in 2.9?

i am using level 6 lisence which is of unlimited sessions ...

thanx Andrew

I have an MT box 2.9.14, with LAN and WAN NICs'... i am transmitting internet service wirelessly through "wireless interactive" access piont to the clients...my issue is that some of my clients are internet cafs' ..and i used piont to piont wireless network using two 24 dBi grids and two s...

no, i ment Outlook Express with with pop3/smtp

hi guys

i have recently installed MT 2.9.14 , i wanna to configure it so that my hotspot clients can get into outlook , receive and send emails - right now they are getting error no. 400 when they open it- and the users are using XP SP2

t y in advance

hi i am using MT v 2.9.14 i have setup the hotspot and also setup the DHCP server ...as i used to do in v 2.7.13 before ... the problem is that is giving two ip addresses for each MAC , so that the pool is filled in about 40 min and i have to erase the leases to get it back to normal operation ..so ...