Hello I am attaching a drawing to help you understand what I am trying to do. So I have 2 adsl modems connected to ether 1 and ether 2. I also have a wireless access point connected to ether 3. On the wireless acces point I have 10 incoming pppoe clients. I want the 5 of them to connect and use the ...

Hello I am attaching a drawing to help you understand what I am trying to do. So I have 2 adsl modems connected to ether 1 and ether 2. I also have a wireless access point connected to ether 3. On the wireless acces point I have 10 incoming pppoe clients. I want the 5 of them to connect and use the ...

Adding static routes to A did the trick.

Thanks

First of all thanks for your time. If I add dst-address= 192.168.101.0/24 gateway 192.168.1.4 it returns unreachable. If I add dst-address= 192.168.101.0/24 gateway ether1 it returns reachable but cannot ping or access 192.168.101.1. Maybe I need another route to ether2 where the desktop is connecte...

Hi.

I tried to make a drawing to give you an idea of what I am trying to do.

Is it possible if I give you remote access to have a look on my setup?
Since its working on your setup?

Is the KT flag what I want on v6? because on v5 was KR. I haven't made it to work on any v6

If its corrupted isn't strange that it works on 5.26? I have bought it from rapid ssl IE gives: There is a problem with this website's security certificate Chrome gives: Cannot connect to the real xxxxxx.xxxxxx.com Something is currently interfering with your secure connection to xxxxxxx.xxxxxxx.com...

Hi

This the the message from mozilla

Peer's certificate has an invalid signature. (Error code: sec_error_bad_signature).

Thanks for your time

I have everything working under v5.26 but on v6.12 no luck. I have import the certificate and got the KT flag. I have it enabled on the hotspot profile and on www-ssl service but every browser gives a warning for untrusted connection when try to login to the hotspot through https. Have anyone got it...

I have the same problem.
I get the KT flag and then https on browsers gives errors.
5.26 works

Please some info.

Have you import it correctly?
First .csr and the .key

Do you have it enabled under hotspot settings?

Under services do you have the correct cert?

Too many option too little information.

Success The second option (hold down the reset button for netinstall) on the link you sent me did the trick. Still I cannot get access to boot otpions through serial connection but that's another story. Do you have any idea for which reasons the router crashed? For avoidance if possible. Enjoy your ...

As the title sais. I get only one beep. Serial connection gives this output RouterBOOT booter 2.41 RouterBoard 450G CPU frequency: 680 MHz Memory size: 256 MB Press any key within 2 seconds to enter setup.. trying bootp protocol......... failed kernel loading failed loading kernel from nand... OK se...

Same thing here. v5.25 works but on v6.1 user doesnot activate after succefull payment.

A link here please sir.

Hello

v5.25

When a user expires is loosing its profile and when trying to login get "no valid profile found" instead of "credit limit reached".

Any Ideas?

Have you enable IPN on paypal?
Is you usermanager accessible from wan?

We need more info

*up

I have a 10mbit connection and I am running a small hotspot with 20 clients. I have limit them from usermanager to 512k downloads each. Do I need to do something else so they share equal bandwidth? Lets take the scenario that all of them are connected at the same time and the are using the max limit...

Try a different approach, at the register page the user choose the user/pass and u activate them.

Can I disable the poe capabilities of port1 on 450g?
Can be used as a normal simple port? I want to connect an access point to that port but I think a funny smell comes out of that port.

*bump*

Any ideas guys, I am stumble on it.

Hi I have a hotspot running with ssl enabled and I have purchased a certificate. Everything works fine I can login with https enabled to my hotspot but when I try to purchase credits through paypal when I hit pay with paypal I get this error http://www.paypal.com uses an invalid certificate The cert...

Do you have signup enable on usermanager?

Probably an easy one but I am new to this. so I have mikrotik with ether1 connected to my local network with ips 192.168.1.0/24 nd on ether2 hotspot running with ips 192.168.2.0/24 i want when i am connected to my local network to be able to access ips on ether2 and the other way also. Can u please ...