MikroTik

morf

I have exactly the same behavior on version 7.15.3.

morf

I hope that RouterOS v7 will catch up with new technologies now when it as a much more updated kernel.

The irony is that my children are already growing up until ROS v7 sees the light. No matter how it turns out that the future generation will wait for it

morf

Hello everyone. I want to share my observations. Recently, I have been feeling a certain stagnation of the Mikrotik company. This applies to both the release of RouterOS and equipment, as well as the latest news on their website. I decided to check the mentions of Mikrotik in Google Trends. So it is...

morf

@morf
It is difficult to believe when I write that I am in fastpath with the bgp router?

i'm sorry, i didn't ask you to take a screenshot to check you out :) Do you have "connection tracking" enabled or disabled in your firewall settings ?

2020-12-21_13-05-27.jpg

morf

I was in fastpath.

Please, show a screenshot of IP ->Settings.

morf

Full feed? Time for learning all routes? [/quote] The issue for us is not the time to load all the routes (quite fast), but the convergence time in case of flap... horribile. [/quote] Beta 7 is much better in this regard. I tested. Have you tried enabling FastTrack Connection and disable Connection...

morf

I took counter samples from three of the seven CCR2004s I have in production and the TX drop rates for the busiest interfaces were: * 1/23536 packets dropped (0.0042%) * 1/76566 packets dropped (0.0013%) * 1/104768 packets dropped (0.00095%) These are all on 10G ports with 10G fiber links and ROS 6...

morf

In your youtube video https://youtu.be/amIDNuT-mkE?t=570, I drew attention to the CCR2004 load tests.
Why is CCR2004's performance so low ? CPU usage floats from 70% to 90% at 5 Gbps.

morf

I think it's possible. Only if there aren't enough routes to fit in memory.

morf

Regarding small MTU tests (tests #1 and #2), I suppose that the bottleneck is on the packet generator or receiver side , not the CRS317. As you see, PPS (packets per second) value is almost the same in all three cases, and the transfer speed depends purely on packet size. That is a typical case for...

morf

ROS 6.44.5 ... CAPSMA & WiFi killed with 3.25

And HOTSPOT!

morf

When I update to Winbox v3.25, on the Hotspot>Active tab, everything is ok, the connection is ok. But in the event when turn to Hotspot>Host tab, everything is gone wrong, everybody in the hotspot has been disconnected, then when I back to the Hotspot>Active tab, all the active has been disconnecte...

morf

If you use version 3.25 and go to IP - > Hotspot, hotspot does not behave adequately and resets all authorizations: internal error: login error: failed to add an address list rule: there is already such an entry (6)
There is no such thing on 3.24.

morf

I once studied this question. You cannot balance VPLS using LDP signaling. You need to use BGP signaling and, in my opinion, some scripts. Somewhere on the forum already discussed.

morf

After all my testing, I have another setup up on some mikrotik switches that works great, it seems like its possibly a bug with the new ccr2004. I see the vpls shows the new route within 2 seconds on the web interface, but doesn't start passing traffic for another 20 on the vpls connection. My othe...

morf

Hello. Could you give an example of the configuration ?

morf

Updated CCR1036 to version 7.1. Configured a BGP session with BIRD on Ubuntu, where Fullview is located. All routes (818 thousand) were loaded for about 15 minutes. 1-3 CPUs are constantly loaded. And all these 15 minutes I waited for the response to the command "routing/route/print count-only&...

morf

Hello. Updated CCR1036 to version 7.1. Configured a BGP session with BIRD on Ubuntu, where Fullview is located. All routes (818 thousand) were loaded for about 15 minutes. 1-3 CPUs are constantly loaded. And all these 15 minutes I waited for the response to the command "routing/route/print coun...

morf

If only there was IPv6 fastpath.... well since there were no rules in firewall, it had the lightest load possible - basically packet forwarding along connected routes. in terms of PPS it is pretty much understandable you will always get subpar results compared to IPv4. the header size is twice big,...

morf

I did try with up to 50 threads, still same results

Released a new beta RouterOS 7. Try it on it, maybe something has changed?

morf

Hi all How many clients can be shaping on this hardware ? - individually create a rule per client - about 3500 clients Does anyone have experience? Thanks 1072 will not be able to shape as many clients. There will be packet loss and a terrible jitter. I have myself shapil ~2000 clients and it was u...

morf

Hi, everybody. No one else wants to share their tests ?

morf

What does "Bridge Port Extender" mean ? MLAG ?

morf

GPEN? Are you serious?
Are you planning more advanced CCR models with powerful cores? Since any DDOS kills in an instant CCR.

morf

The internal "graphing" tool cannot display more than 2.1Gbps. But that does not mean the router cannot handle more. You need to use an external graphing tool (with proper configuration to use 64-bit values or to poll more often) to be able to graph higher rates. In your graph you can add...

morf

Same problem on CCR1072.

morf

The big problem on CCR1072 with 6.42rc43 (Release candidate)
After the upgrade, all 10g interfaces were lost! Only 1 gb copper is still visible. Reset did not help.
I had to roll back to a stable 6.41.3

morf

nstreme-plus ? What is it ?
thats my question too

+

morf

В целом, удобно. В общем, график по интерфейсу можно отрисовать прямо в RouterOS, с просмотром через winbox и http.
А так, хорошая работа, ознакомился.

morf

Does mikrotik this feature in the new standard 802.11ac?

morf

Hello! What improvements have 802.11ac protocol? I need to connect ~ 50 clients. I read that 802.11ac works best with lots of connections.
Is this true?

morf

Not working lease-script if using ip-pool in the address field. In other cases, works without problems. Example: /ip dhcp-server lease add address="TEST_POOL" comment=\ id_E0282F67-ED0E-4116-A743-03435D123444 mac-address=00:0F:02:68:43:7C \ server="TEST_SERVER" add address="...

morf

Hello! Have CCR 1036.
Unexpectedly lost all BGP settings.
Helped restart. Ticket # 2014060266000809

morf

After the broadcast storm, stop working Vlan on CCR.
Please check.

morf

Where i can see changelog in v6.13 ?

morf

I have a CCR1036-12G-4S with the following running on it; hotspot PCC load balancing 2 Nat rules I am seeing slow load times on webpages and I suspect a possible issue with DNS Caching. I am on v6.1 with firmware version 3.09. All packages installed are running v6.1 including user-manager. Should I...

morf

/queue simple;
:foreach i in=[find where name~"hotspot" ] do={
	:if ( [ :len [ get $i dst ] ] = 0) do={
	:local hname [ get $i name ];
	:local ip [ get $i target ];
	/queue simple set dst="sfp1" $hname;
	} 
}

Fun?

morf

RU: Здравствуйте! Динамические очереди в ppp/hotspot/dhcp - это здорово! Но есть проблема, которая не дает их использовать полноценно. Дело в том, что очереди создаются без указания Dst. параметра. Получается, что трафика для Target. шейпится во всех направлениях. Это очень неудобно. Например, я хоч...

morf

i cannot use 6.10 have reboots every some days. max uptime was 4 days. i went back to 6.7. both firmwares have a memleak when creating support files. i tried to create a support-file every 10min to have one in case of an error. you can see the mem going down rapidly. after a conversation with suppo...

morf

Just got on my CCR1036 stopped working vlan. Stopped going traffic on some Vlan. Helped rebut. ROS v6.10

How do I tired of all ..
In version 6.7 and worked 2 months of uptime.
ROS 6.10 - disappointing.

morf

Just got on my CCR1036 stopped working vlan. Stopped going traffic on some Vlan. Helped rebut. ROS v6.10

morf

With this Ticket #2014021766000422 we solved the problem with Janis Megis. This tickets are nuances, read my latest post on support@mikrotik.com
Normis, please see this topic - http://forum.mikrotik.com/viewtopic.php?f=2&t=82321
Ticket #2014022666000192

morf

I use the hotspot functionality for customer authorization by mac-address. It works for me with a freeradius. I give out to all subscribers public addresses.
Scheme called IPoE. Is it a problem?
I'm working on this scheme is not the first year. The problem started with version 6.8

morf

I solved this problem. She was associated with the hotspot.
When you create a hotspot on an interface, you create a dynamic rule with queues simple (hs-<interface_name>) Queue Type = hotspot-default. I put Kind = none. Helped. Traffic began to pass unscathed.

morf

to normis: Now the error occurred in the hotspot. Account in hotspot not authorize because address list were dynamic entry with the IP addresses. Not removed! Why? It happened so that accounts can not be logged because remained dynamic IP addresses in the address list. I had to manually delete the ...

morf

Please, see!

morf

Now the error occurred in the hotspot. Account in hotspot not authorize because address list were dynamic entry with the IP addresses. Not removed! Why? It happened so that accounts can not be logged because remained dynamic IP addresses in the address list. I had to manually delete the dynamic (d) ...

morf

to normis: Now the error occurred in the hotspot. Account in hotspot not authorize because address list were dynamic entry with the IP addresses. Not removed! Why? It happened so that accounts can not be logged because remained dynamic IP addresses in the address list. I had to manually delete the d...

morf

btest is unreliable. Get two good PC's and test THROUGH the CCR using the tool called iperf.

I did these tests. See post above with pictures. I wrote everything in detail.

morf

morf

Hi

if I read right this is just for UDP packet ?

Hello!
Yes, passing UDP packets is very unstable effect on CCR1036.
For example, now I have 500 Mbit real traffic. If I miss CCR1036 through UDP packets of 64-1000 Byte, then begin the hard packet loss.

morf

I'm seeing the same problem with 4 of my CCR's on 6.9. Please update when fixed.

I can not get an answer from the support. Ticket created and silence ..

morf

morf

Ticket#2014021766000422

morf

Maybe try disable/enable fast patch.
IP>Settings.....

2jarek, thanks for the answer!
Sorry, did not help. Tried all options in IP-Settings->...

morf

Anyone? Anything?
Normis?

morf

What router are you using?

morf

Dear support mikrotik, please pay attention to this issue - http://forum.mikrotik.com/viewtopic.php?f=2&t=81936&p=409595#p409734 Ticket #2014021766000422 The fact that the traffic on my CCR1036 increased to 700-800 Mbps, and the packet loss began. I gave a detailed description of the scheme ...

morf

Next.
The problem occurs when testing UDP packets in bytes 750-1000.
We can conclude that the CCR1036 weak performance when passing UDP traffic. With TCP-packets such problem was not found.
Is it possible to fix this by optimizing ROS?

morf

Thank you very much for your reports about 6.10, they are very helpful for us. Please use this thread for posting actual issues with 6.10 version. For other issues and problems, contact support@mikrotik.com or use an appropriate forum thread. EN And thank you for his work. Sergey, please pay attent...

morf

In ROS 6.x bad performance DNS server. Try not to use DNS ROS 6.x.
Write on support@mikrotik.com. I already wrote. Created a ticket, but there are no results.

morf

I did a visual test demonstrating the problem. Please developers pay attention to it.

morf

I have this problem on my ccr1036. 1500 users.

morf

I think I found the cause of the loss. If after CCR let UDP traffic packages from 64 to 500 bytes, the CCR begins blunt and lose packets! And so begin: 1. I will try to convey through CCR UDP packet size 64-500 bytes. Running ping to the resource that is available through the CCR 1036. Test off. 2. ...

morf

I did downgrade to version 6.7. All normal. Version 6.9 with a big problem.

I'm lying, then downgrade to 6.7 was a little better, but still very noticeable packet loss of 1-2%.

morf

CCR 1036 Drop packet.
http://forum.mikrotik.com/viewtopic.php ... 95#p409595

morf

Delete

morf

CCR 1036. High load loses packets. Ticket#2014021766000422 [admin@MikroTik] > system resource print uptime: 5d9h3m25s version: 6.9 build-time: Jan/31/2014 11:18:19 free-memory: 3243.1MiB total-memory: 3969.0MiB cpu: tilegx cpu-count: 36 cpu-frequency: 1200MHz cpu-load: 18% free-hdd-space: 890.4MiB t...

morf

I have a similar problem.
[Ticket#2013121166000685]

morf

Hello!
Large CPU load when using marking rules.

morf

Hello!
Where can I see a preliminary list of changes in ROS 6.5?
Tnahks!

morf

morf

morf

morf

morf

morf

Noticed that the incorrectly displays the speed of those IP addresses that goes through NAT

morf

Hotspots are not correctly counts traffic load.
ROS v. 6.3

morf

Also, I see you have queues with no target, this is not correct, and is likely causing problems.

Then I have them, but the problem still remains.

morf

If I turn on the queue:

morf

It's fun!
ROS 6.2 shows not the correct values of the traffic.
How is this possible?

morf

It's fun!
ROS 6.2 shows not the correct values of the traffic.
How is this possible?

morf

This is what? Thank you! LOL :-) Try to connect by ip address. I'm trying to IP and MAC addresses, but is not connected to the program. Try to change the cable into a different port. (eth1 -> eth2). Just make sure that you have a registered IP address from the subnet mikrotik. I think your problem ...

morf

This is what? Thank you!

LOL

Try to connect by ip address.

morf

It was mentioned in several topics already.

Yes, we are working on new routing implementation which will work much faster.

Thank you for your reply, when will the first implementations?

morf

searching for prefixes has nothing to do with multicore or routing package, this is console speed. Normis, but you still can not deny the fact that with a BGP-FullView work is very slow? Try to load 2 "FullView" BGP table and see how it will work CCR this does not affect routing performan...

morf

searching for prefixes has nothing to do with multicore or routing package, this is console speed.

Normis, but you still can not deny the fact that with a BGP-FullView work is very slow?
Try to load 2 "FullView" BGP table and see how it will work CCR

morf

BGP multicore become a hurry...
I use BGP with 3 full feed. It works but BGP handling is very slow...
route query take 2 mins to seach a prefixe...

I have the same situation, but with a 2-BGP sessions.

morf

Hello! We have the technology cisco is "Local Proxy Arp". How about mikrotik? I'm NOT talking about the function of "ARP proxy". Proxy ARP - works only between interfaces. Local Proxy Arp - router responds to any ARP request to its MAC-address on this interface. https://supportf...

morf

In version 6 ROS DHCP server has a new feature "dhcp option set". What is it and how does it work?

morf

@morf have you enabled SNMP on that device? if yes try to disable and test again. snmp off. I sent a support mikrotik supout files and screenshots. I use to build Jul/17/2013. In the tech support told me that I updated to the last. What is the point? In order to reproduce the situation need to wait...

morf

In the last 8 days, when CCR1036 began to work slowly, there was an increased memory consumption.

morf

After 8 days of work, CCR1036 began working very slowly. After the restart, everything comes back to normal.

morf

BGP process only using 1 core, whenever i tried to change routing filter in BGP like prepend or anything after that I cannot connect to my winbox. SSH normal only winbox I cant use. Anyone got a similar problem with me?

I also have problems with BGP when loaded only one core

morf

top
Ticket#2013071966000608

morf

morf

Simple Queue: queue simple print Flags: X - disabled, I - invalid, D - dynamic 0 name="500" target="" dst=wan parent=none packet-marks=Pautina_500 priority=8/8 queue=PCQ_upload_5M/PCQ_download_500 limit-at=0/0 max-limit=0/0 burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s tot...

morf

Here are my mark packet rule. They are quite simple and will work no matter on or off connection tracking. But the problem starts when you turn on connection tracking. ip firewall mangle print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; Pautina_3000 chain=postrouting action=mark-packet new-p...

morf

I wrote on support@mikrotik.ocm, has provided supout.rif 2 files before and after the problem. We were given access to our CCR1036.
Dear mikrotik you are interested in solving problems with CCR1036?

morf

With connectioin tracking not work correctly simple queue.

morf

morf

If the firewall turn onconnection tracking, the speed of drops from our subscribers.
ROS V6.2 jule 17

morf

Thanks, Stillhard.
I have read the changelog.
Normis, please tell me, any planned improvements in the performance of CCR?

morf

I have read the changelog.
Normis, please tell me, any planned improvements in the performance of CCR?

morf

We don't have any holidays now. Work work work and fixing bugs
You can tell which bugs are fixed in version 6.2?
See changelog.

Excuse me, but where to get a new list of changes. There is only 6.1.

morf

We don't have any holidays now. Work work work and fixing bugs

You can tell which bugs are fixed in version 6.2?

morf

Please give me a link to ROS 6.2 RC1. And also, the current list of changes.
Thanks

morf

Did not see, thank you!

morf

Hello, mikrotik!
What happened to topic to the results of testing ROS 6.1?
Where to write?

morf

memory leak fixed in this build:
http://forum.mikrotik.com/viewtopic.php ... =1#p372810

Normis, thank you.
After the upgrade passed about 2 hours. The result of the screenshot.
Memory also consumed, but less. I will watch today, will report on the results later.

morf

Sent to you by e-mail files supout.rif before and after rebooting.
Ticket#2013061166000759

morf

Juniper or Cisco's bug trackers, where are they again ? ;) I'm sure they have their inner bug tracker or something similar. And as I'm sure that they have their beta-testers. MikroTik also has internal bug trackers. It's good. First of all I want to say that I am a big fan of mikrotik. So perhaps i...

morf

Juniper or Cisco's bug trackers, where are they again ?

I'm sure they have their inner bug tracker or something similar. And as I'm sure that they have their beta-testers.

morf

@ morf I note your script for "Free Memory" and it reminds me of the script that would reboot router on high average CPU load, which only worked occasionally as with high CPU load, the average count (no matter how much I edited the number) would not complete sometimes and the router would...

morf

............................................... and this is not the place to report issues - write to support Yes I agree but it also very important that we the users of Mikrotik products can view potential issues being posted and that the questions are answered by Mikrotik, this way we as users ca...

morf

Take it

morf

Period 1,5 day

morf

In Russia it is called a "a crutch"

morf

Works PPTP server and shaper simple queue. Memory leaks in about 1-2 days.

+ At higher loads, the shaper is not working correctly queue tree PCQ. Correctly works only simple queue.

morf

Any comments from MikroTik ? Or silent overcome again ? Comments on what exactly? Please clarify the question. This topic includes a wide variety of observations. I mean: Why is your CCR routes so cute and fun.... NO. I mean what is the problem, that your platform brings me such heavy latency jitte...

morf

After 2 days of CCR1036 (ROS 6.1) was very buggy through winbox management, as well as turn off pptp session of my subscribers to a timeout.

morf

Do not use target=0.0.0.0/0 - it is wrong - your queue doesn't know what is target upload and what is target download specify your client subnet as target. I replaced it on the IP address. Nothing has changed. I was more interested in queue tree, that did not work as it should. PS: Могу ли я с Вами...

morf

Dear mikrotik!
Will there be any changes in the a tree queue with marking rules of traffic?
Dynamically created rules in the tree queue are working properly, but more complex with marking rules of traffic work very badly.

morf

Comments?

morf

CCR 1036.
Version ROS 6.1rc1 May/30/2013 09:54:26
Use queue simple with packet mark and PCQ. Very strange behavior shaper. Subscribers complain about the speed.

morf

Hello! CCR1036 works as a PPTP server and the shaper. Used shaper queue tree & queue simple & marking rules. Version ROS 6.1rc1 May/30/2013 09:54:26 1. Very high processor load, with little traffic. (200 Mbps) 2. winbox disappear in queue Simple Rules 3. Badly working shaper queue tree / que...

morf

Same to me. After upgrade to 6.0 for x86 all vlans stopped working. Reset config and doing it again also does not help. Downgrade to 5.25 solved the issue. Seems like 6.0 release for x86 has major issue with VLANs. I wrote to support@mikrotik.com couple of days ago, but no answer ..... yet. I have ...

morf

Yesterday I purchased CCR1016, hope for a positive result.
Why mikrotik promises do not match the reality?

morf

I've updated the ROS 5.18 x86 -> 6.0 x86
Everything worked, except vlan. Enables / disables the vlan interfaces, nothing helped. Rolled back to 5.18

morf

how CCR works with BGP, and how to cope with the routing of about 1 Gbps of traffic? Please write, those who used ССR with 2 or more BGP uplinks.

morf

5 - 7 percent cpu utilization on 2 of the 36 cores corresponds to about 0.4% overall cpu utilization. I don't see any strange things here.

Maybe so. I found it strange that in the "pure" ССR1036 is any load on the CPU.

morf

Hello!
Strange CPU with two cores. The CCR1036 has no firewall rules, queues, nothing. But for some reason the load on the two cores of about 5-6%.
I do not want to say that this is a problem, but it can be any source of the problem?

morf

Dear, mikrotik! What do you think about the "loсal proxy arp". It exists in many L3 routers. Why not?

This functionality is very requested by many operators.
Thank you!

morf

You done that have caught this bug!
I bought 2 CCR1036, but I'm afraid to put in the real world. So read the forum and wait for a working RC.
I'm on the CCR1036 is not working as it should shaper. Earlier I marked connection then packages and create rules queues. Now in RouterOS 6 this does not work.

morf

Let's not compare apples and oranges. If any of you guys need help with something, let us know. RouterOS v6.0rc12 looks great so far, if you want a pre-release, check above. We will release it this week.

Normis, thank you for your reply!
Tell me, what are you working on now in the RC12?
Thank you!

morf

Normis, hello! We want to see the comments Mikrotik.

morf

Hi, Mikrotik!
Where comments on the described problem? Exit to communicate with customers

I purchased a ССR1036, but in the real world I'm afraid to use it

morf

Bonding (mostly) broken in 6.0rc11 Tested with 6.0rc11 and then again with 5.24 to confirm broken behavior. Tested with active-backup, 802.3ad, balance-rr and balance-xor. Tested with layer 2, layer2-3 and layer 3-4. Under 6.0rc11, regardless of bonding mode or transmit-hash-policy, the divison and...

morf

Bonding (mostly) broken in 6.0rc11 Tested with 6.0rc11 and then again with 5.24 to confirm broken behavior. Tested with active-backup, 802.3ad, balance-rr and balance-xor. Tested with layer 2, layer2-3 and layer 3-4. Under 6.0rc11, regardless of bonding mode or transmit-hash-policy, the divison and...

morf

Is it normal, that E-mail password easy to see in .backup file? And Wi-Fi key too?
Is it not protected format?

I think it's not problem

morf

Does it means that CCR not suppurted jumbo frames?(

Hi!
How much traffic goes through CCR?

morf

The first thing he noticed when loading 100%. RC8. Oleg, hello! Please tell me how you use your CCR? What services are using (NAT, firewall, BGP), and how much traffic passes through it? Олег, здравствуйте! Скажите пожалуйста, как вы используете Ваш CCR ? Какие сервисы используете(нат, файрвол, бгп...

morf

How soon will these updates are available? Thanks!

morf

Version 6 is not working correctly bonding.
On RB1200 3 interface bonding type balance r-r.
In version 5, an interface equal number of Mbps (eth1 50Mbit, eth2 50Mbit, eth3 50Mbit)
In version 6, the balance r-r does not distribute traffic equally (eth1 20Mbit, eth2 70Mbit, eth3 60Mbit)
Thank you!

morf

Max ambient temperature 50C @1.2Ghz; 70C @1Ghz CPU core frequency this information from here http://routerboard.com/CCR1036-12G-4S . In my device temperature up to 55-60C. Maybe this is why it reboots ? Now i plug coolers directly to power supply , so that they were constantly turned on. Temperatur...

morf

In version 6 routeros not correctly works bonding balance r-r.

morf

We have 5 RB1200. We are very interested in this functionality.

morf

system running cca 60 eoip tunnels, 60 pppoe servers, cca 1000 pppoe sessions with dynamic (with help of radius) 1000 simple queus (pfifo)

Hi! Which CPU use was with CCR in this configuration issue?
Thank you!

morf

Here are preliminary (RouterOS v6 rc) results for the CCR 36 core version. Note that filter rules, including bridging and forwarding, will have fastpath support in one of the future versions which will bring it back to possibly wire speed for 64 byte packets (full duplex). Double the numbers in the...

morf

We have two new MUM events still taking place this year: - Ukraine in Kiev, December 8 - Georgia in Tbilisi, December 13 As usual, attendance is free, but you have to register online. http://mum.mikrotik.com Are you going? :) Здравствуйте! Уверен, что русский язык вы понимаете :) Скажите, пожалуйст...

morf

ok, RFC stuff first - internet standard states that DHCP-server has to do best effort it can to assign same ip address to same subscriber very time it connects and that is ensured by setting reasonably high lease time, so that customer can disconnect for some time but after that get the same ip add...

morf

Can you create no-ip or dyndns account and put the script which will update your account with currnet public ip, for that you also need to create schedule. so after that you can you your domain name e.g. xxyyy.no-ip.org and that will be pointing to your public ip, to your mikrotik... You do not tru...

morf

I don't think that is possible to do with a MikroTik. The client will ask for a renewed lease for it's current address at around %50 of the lease timeout, if the address it requests is free, the DHCP server will renew it. The best you might be able to do is delete the DHCP leases table every so oft...

morf

Hello! My customers have a dynamic public IP address through DHCP. The problem is that the caller is always given the same address. How to make sure that subscribers to issue a new IP, rather than the current extended. The problem is that the subscriber requesting renewal and I do not want it to be ...

morf

+
And also using the Private vlan (cisco) or Traffic Segmentation (dlink)

morf

Thank you very much for your reply.
Dear developers, could you include this functionality in RouterOS?
Thank you!

morf

Hello! We have the technology cisco is "Local Proxy Arp". How about mikrotik? I'm NOT talking about the function of "ARP proxy". Proxy ARP - works only between interfaces. Local Proxy Arp - router responds to any ARP request to its MAC-address on this interface. https://supportfo...

morf

You did not understand me. I'm not talking about the "Proxy ARP". I'm trying to talk about the " Local Proxy Arp". Proxy ARP - works only between interfaces. Local Proxy Arp - router responds to any ARP request to its MAC-address on this interface. https://supportforums.cisco.com...

morf

Hello, I'm not speak well in English.
I can give a link to the description: https://supportforums.cisco.com/docs/DOC-1267

morf

Maybe some other way it is implemented?

morf

Hello! We have the technology cisco is "Local Proxy Arp".
How about mikrotik?

morf

morf

Hi, we had report this issue to MT support in December: Ticket#2011120566000486 We had two RB435G used for our main backbone (200 Mbps link). The link stop to work almost every days, as it's been always more than 50 Mbps going throught it ... The only way to get the link back to normal state is to ...

morf

Are there any plans for the development of this standard have mikrotik?

morf

Yes, because ubiquti actively working in this direction. Especially at 24 GHz.
I want solutions from mikrotik, mikrotik because I like it.

morf

Hello!
Is there at least some solution to this problem?
We have a large party rb435. It is not nice: (
Power POE (22 v), and the second ethernet port

morf

In the last rb1200 bad ports (9 and 10)
the first port is not working.
In the other rb1200 9 port is not stable.

Concluded that the last rb1200 ports do not work correctly.

morf

what version of RouterOS? what ports are you using? what configuration? are there any queues? Version 5.11. 10.0.0.254 - Port 7 192.168.0.254 - bonding 3 and 5 port (balance r-r) Version 5.11. 192.168.0.253 - bonding 3 and 5 port (balance r-r) Queues do not use. Only routing. At 192.168.0.253 raise...

morf

Hello! Help please. Two rb1200. Routing between them. If I do ping from 10.0.0.254 to 192.168.0.253 - ping is excellent, no losses. If I do ping from 10.0.0.1 to 10.0.0.254 - Ping also excellent. If I do ping from 10.0.0.1 to 192.168.0.253 - ping is lost to 2-5%, while the pings with large size pack...

morf

Dear support, please help me.

morf

Good day! I have mikrotik x86. Mikrotik hotspot to set up a radius server. Clients authenticate by mac-address. How to make clients received dynamic public ip-address? In the hotspot set up the address-pool with its public ip-address. Client assigned ip-address, but go on the Internet, he can not. I...

morf

Strange problem with mikrotik based on the x86. In the 3 network vlan / 24 / 24 and / 18. Periodically lost pings from mikrotik to some subscribers from / 18 networks. On another computer, in this vlan, I ping these subscribers. Change mac-address from the interface mikrotik, pings start to go missi...

morf

The more rules you add, the more rules need to be checked for each packet. So it depends on the number of packets and the available CPU resources. No one can give you a hard number as it depends on your specific environment. If you need to check layer 2 information you should do so on a layer 2 dev...

morf

Hello!
What is the maximum number of rules can be used in the Firewall? I want to check the mac address.
Thanks!

morf

from USA Las Vegas. PDF

Wow! What are the antenna and the wireless card did you use? What is the distance between mikrotik?

morf

Now I have is offset antenna with bipolar radiator. That is, mimo2x2. Radio link throughput ~ 200 Mbps half-duplex.
I want to replace the wireless card on mimo3x3 and make another radiolink mimo1x1 and connected to the chain 3 in wireless card.
What do you think?

morf

it works with mikrotik 300mb udp http://www.sparklan.com/product.php?func=view&prod_id=181 Thank you for your reply. I realized that the mikrotik support chipset AR9380, but what about the AR9390 wireless card "Compex WLE300NX MINI PCI Express Card." I have a question about the polari...

morf

Hello!
Is there any progress in mimo3x3?
Can you recommend a wireless card mimo3x3 with channel speeds up to 450 Mbps.
Thank you very much!

morf

Hello!
Mikrotik support this wireless network adapter Intel WiMAX / WiFi Link 5150 ?
mimo 3x3 up to 450 Mbps
Thank you, sorry for my english.

morf

Is Supports mikrotik 3x3 MIMO chipset AR9390?
If so, how implemented to work in mikrotik?

morf

Hello!
I can not find a good server lan network adapter for mikrotik.
It is planned to skip up to >200 Mbps and >30k pps
Maybe, this INTEL EPI9400PT.
Please tell me. Thank you!

Please, promt.

morf

Hello!
I can not find a good server lan network adapter for mikrotik.
It is planned to skip up to >200 Mbps and >30k pps
Maybe, this INTEL EPI9400PT.
Please tell me. Thank you!

morf

Hello. Sorry for my English. Does the router running the network card with 4 ethernet, for example: 1.) INTEL E1G44ET Gigabit ET Quad Port Server Adapter PCI-E x4 10/100/1000Mbps 2.) INTEL E1G44TBLK PRO/1000 Gigabit ET Quad port Server Adapter, 10/100/1000Base-T, 1000Mbps, PCI-E-4x (OEM) Could you g...

Search found 183 matches