Update: reset all routers and applied the examples provided here: https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Setup_Examples (example 1/2) Got All VLANs up and running, no packet loss, full speed across the network and all SSID's working as they should - all good and fine :) But I nee...

That's easy to check. Speedtest to internet shows ~50% speed and ping shows packet loss: PING 8.8.8.8 (8.8.8.8): 56 data bytes 64 bytes from 8.8.8.8: icmp_seq=0 ttl=116 time=13.750 ms 64 bytes from 8.8.8.8: icmp_seq=1 ttl=116 time=16.930 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=116 time=13.187 ms --...

A follow up question before i go insane (:D) Do I need both interface vlans AND brigde vlan configured? With interface vlans I get traffic, but packet loss. With brigde vlans I get some connectivity but having problems getting my network up and running. If anyone know of examples on configuring a MT...

Thanks for the tip, will check out the link. And i discovered "brigde vlan" because of that.. not just interface vlan..

That is correct, they are used as switches right now. (simple brigde and vlan setup, nothing else) Edit: I can add the config from the last router (closest to pfsense box). I have removed vlan id 20 from the router, just to make it easier for my self to get the basic stuff working correctly first. A...

I have the following setup: network-vlanv2.png The routers are 2011's From "user 1" I can ping the different routers and pfsense without any problems From pfsense and to 8.8.8.8 i get from 30-100% packet loss. Any suggestions on what I can try? PS: The reason for this setup is to place my ...

Actually from this image: http://www.flickr.com/photos/67505737@N ... otostream/

It doesn't look like rust at all. It definitely looks like the cover was open.

Or the catX cable that didn't have a "drip loop".

That's a hard question for me.. (without aaaaany information on what you use that rb1000 to, or how it performs now)

A cheaper option: http://routerboard.com/RB2011UAS-RM ?

Hey normis,

Any news from an outdoor mikrotik with integrated 2GHz support? I mean OmniTik or Groove.
I am counting down to run a big hotspot mesh with over 100 AP over this...

Navid,

currently not, no news yet

Any updates on the 2,4 OmniTik/Groove now?

Maybe not the right place, but just wanted to say that the info on 'CCR1016-12G-BU' says 17.8Mbps (should be mpps I guess?)

gnuttisch: Can you post a link to that 711 case/box you use there?

I have the same problem, with both the sxt and the sextant.
Obviously a flaw in the design here.

any updates here?