Dear,

Thanks for Help.

Hello, Thanks for your answer. based on example http://wiki.mikrotik.com/wiki/NTH_load_balancing_with_masquerade if I call wan1 is odd and wan2 is even, the correct value for NTH / ip firewall mangle add chain=prerouting in-interface=Local connection-state=new nth=3,1 action=mark-connection new-conn...

Hello, I'm using Mikrotik V5.7 I have two network interfaces wan1 and wan2. wan1 has 1MBPS. wan2 has 2MBPS. So I need to use load balancing using NTH to make 1/3 of network traffic through wan1 and 2/3 of network traffic through wan2. what is the values of NTH "Every and Packet" for wan1 a...

it's working properly
Thanks Dear for support.

Thanks for your answer,

Mikrotik version is 5.7.
modem is HUAWEI Mobile Connect Model: E160G HSDPA USB Stick.
and I stay connected about 2 Minutes then the problem occurred.

Hello, Thanks for your answer. I mean with "works correctly" that when I connect USB modem to Mikrotik, the USB modem take IP from ISP and go through to Internet " for example I can ping google.com" But after it authenticate , connect and take IP from ISP, the USB modem disconnec...

Hello, When I connect USB modem with Mikrotik, it works correctly. I'm using PPP client to connect to USB. But after it authenticate , connect and take IP from ISP, It disconnect and then write "resetting link" at status PPP client interface and didn't make anything else. at logs it shows ...

That's all I need right now.
Thanks for your answer.

sorry for miswrite "Ethernet2".
I mean "Ethernet" that is connected to Access point.

Hello,

I want to implement hotspot for "Ethernet" that is connected to Access Point as depicted at the image.
DHCP server configured on "Ethernet".
if I configure Hotspot for "Ethernet", will Access point unable to access Ethernet2 ?
is this applicable ?

plz help.

Hello,

can I make DHCP server on the NIC that is connected to the Access Point
At the same time I will implement hotspot on the same interface ?

Thanks & Regards

Hello,

I have wireless client.
I need to run Mikrotik OS on VMWARE over windows and I will use HotSpot.
is that possible to do that ?
what is DHCP server I will use use (DHCP server for Mikrotik OS or DHCP server for Access Point ) to give IP to client ?

Thanks in advance.

Plz,

Can you give me example how to do this ?

Hello, I have user that use Cisco VPN clients to connect to customer site with the following diagram ---------LAN------------ ---------WAN--------- Cisco VPN client---->Mikrotik ---->customer site Cisco VPN client can connect to customer site but unable to reach to any server at customer site. what'...

Hello,

Can I connect wireless using PPPOE ?
any help will be appreciated .

Thanks.

Hello, I run Mikrotirk with 2 Network interface on Vmware . one of NIC is bridge and ensure that it is connected to Internet by ping my DNS. and the second NIC works with NAT. all of my client gateway connected to second NIC. I can login hotspot and ping google.com from client but I'm NOT able to op...