Sorry, late reply. But, thanks yes that's what I meant: Couldn't see the router from outside it's domain or couldn't see the Public IP. BUT... I figured it out. If you default a router/hostpost and let it use the default setup. It disallows you access to it remotely. The "Drop Access" rul...

I tried both rules you suggested. Still nothing. I can't even get to the Public IP of the router. I can ping it, etc... But can't access it, even less access winbox. Baffled. ISP pings it so that's not the problem. you mean is, you want remote to the 2nd Mikrotik using another IP Public ??? (not fr...

Mr/Ms fewi you give me the rule for Nat is working but, the problem is, working fine if i'm disable all "Firewall Filter" :( what's wrong with my "Firewall Filter" or, should i add a new Filter ??? here my code # oct/08/2011 14:10:01 by RouterOS 5.6 # software id = 4ZK3-D2MU # /i...

Hi thanks for the reply. I can ping anything from anywhere. I just can't get into the second router. Of course that's the private sub. I can't even get to the Public IP I have on the router. I shouldn't have to port forward anything should I? 2 routers behind one modem? I guess one would think a po...

i can't help more how about you see my Post in here http://forum.mikrotik.com/viewtopic.php?f=13&t=55525 Let Me said your 1st Mikrotik is x.x.88.0/24 and the 2nd is x.x.0.0/24 so, you remote from x.x.0.0/24 connect o x.x.88.0/24 and the connection is timeout. right ??? My config at that post wor...

Hello anyone Please help newbie to config Mikrotik in RB750 with ROS 5.7 I have IP Public in ether1-Astinet. and IP Local in ether5-lan Ok ... let's the Print Detail mikrotik says 1st /ip fire nat pr detail Flags: X - disabled, I - invalid, D - dynamic 0 ;;; DNS chain=dstnat action=redirect to-ports...

I'm confused now. So here an example. I hope it helps. There's a router with IP address 1.1.1.1. When you connect to it on port tcp/10000 it forwards the connection to port 20000 on a host with IP 2.2.2.2 /ip firewall nat add chain=dstnat dst-address=1.1.1.1 protocol=tcp dst-port=10000 action=dst-n...

can anyone help me out redirect port 53 (dns) too ??? I have 2 ISP let i say ether1-adsl ether2-isp (using Fiber Optic) ether3-lan so, my question is, "How to redirect port 53 into ether2-isp ??? when i browsing or tracert using client computer, i saw my dns is using ether1-adsl i want to chang...

On what port is radmin on 192.168.0.253 listening on? on 6886 The default port come from software is 4899. but, i already change Radmin default port (4899) to 6886 Let me say IP 192.168.0.253 is Billing CPU System. so, after i'm done remote to that IP, i can easy Remote to another client using IP 1...

add action=dst-nat chain=dstnat disabled=no protocol=tcp src-port=8100 \ to-addresses=10.1.0.2 to-ports=80 That's wrong. The source port isn't 8100, it's some ephemeral port. The destination port is 8100. Change it to: add action=dst-nat chain=dstnat disabled=no protocol=tcp dst-port=8100 \ to-addr...

yes u restrict bandwidth to clients through queues and u use lan 5 for client yeah, i'm already done do that here my code /ip address print detail address=192.168.88.254/24 network=192.168.88.0 interface=ether5-lan actual-interface=ether5-lan /ip route print detail Flags: X - disabled, A - active, ...

here my diagram

Dear fewi i need help hope you can help me i'm using RB450G with software 5.6 Here TOPOLOGY i'm using ISP via Fiber Optic connect to L2 Switch. and From L2 Switch have 2 Output Port LAN to my Mikrotik RB450G from L2 Switch port1 connect to RB450G ether1-Domestic (have up/down 5 Mbps Bandwidth) from ...

You can only do that via the proxy - you can't actually port forward based on the domain name in an HTTP request because port forwarding is destination NAT. NAT has to happen on the first packet of a connection. HTTP is TCP, so the first packet is a simple SYN - you don't know the HTTP header yet i...