MikroTik

Jimmy

A simple question.. Where is the NV2 on the new AX Units? We really have a lot of older clients and to switch to AX on the whole we are forced to change our backbone first? Have I overlooked something?

Cheers
Jimmy

Jimmy

hi sorry for the late reply.
I went with rextended's script and ran with it since launch and it works perfectly.
Thank you very much.

Jimmy

Hello everyone and happy new year I'm really starting to have a lot of problems with poor mobile connections that I run the VPN on. The big problem is when the connection comes again does my VPN get a 0.0.0.0 ip? Now I have lived with logging on to my VPN server/router for over 6 months and under pp...

Jimmy

damm I really made a fool of myself :( I upgraded my CCR1036-12G to V7.12.1 I was otherwise running V 6.49. It runs as VPN Server and it just doesn't work anymore :( Upload is now only max 2 Mbit and Active Connections don't update so every time a router drops out and comes back on again, I just get...

Jimmy

Hello everyone I've now tried the support a few times, but I'm afraid the dude is completely dead because I can't get anything out of it. Currently we still run dude V4 as we have a big problem with dude V6 and V7. We can't get Panes/window split to work? We normally run split on 4 panes but we can'...

Jimmy

Same issue here

Jimmy

Hello everyone. I've finally upgraded from a windows server 40beta3 to a rb1100 x4 dude redy and upgraded to V. 7.10.2, but I'm running into a big problem :( I cannot split the panels, I run a monitor on 4 screens where each of the screens is divided into 4 panels/windows. When I press the button to...

Jimmy

I still missing CAP XL AX?

Jimmy

Any new on this? i have now got the same error. I am using l2tp and eoip with trunk in it. I can connect to my routers no problems but all other behind the router i just get an emty winbox? first i had the problems with all my LTE routere but then i upgrate to V7.6 and it go away if i join over mac ...

Jimmy

it could be good to have group rights on maps so that you can choose which maps and more a user can see.
I have over 30 IT-specs in the country who each have their own area and it would be great if each IT-spec could only see their area.

Jimmy

Hi All I'm really stuck in setting up redirection on my hotspot trial. everything works except I would like to redirect after pressing the trial button to a specific home page. On Mikrotik's documentation page it says: (you should correct the link to point to the page you want to show) To choose dif...

Jimmy

I rely don’t understand this post. Event we have V7 now. If you go in and set it to regulatory-domain and put in your country let say i am on a RB4011 then i cant set it cuss it say i need to set gain to 3? This is a standart setup there is not Working. I NO if i go Quick set it Will auto set it on ...

Jimmy

THX sindy i will try it out

Jimmy

Hi Sob and thanks for your reply.
Yes my DHCP server is the same MT Router.
Maybe you have an example lease script about this you might want to share here?
Regards
Jimmy

Jimmy

Hi all mikrotik encoders. I face a challenge and hope it might be solved even if it is far out. I have a wifi network only for computers running VPN tunnels so in the firewall I have set it only to allow traffic to 4 specific gateways, and it has been running really well for over 6 years now, but th...

Jimmy

The frontpage of MikroTik still say FEB 2022 😉

Jimmy

Notning CVE News but new story: https://www.bleepingcomputer.com/news/s ... nfections/

Jimmy

ok i uninstall dude package and new install and now all are good. THX for help

Cheers
Jimmy

Jimmy

hmm it is not working, only the default folder will show in dude files. the database move fine np, but nothing els

i run V.6.49.2
sins the router only have 128 mb space i cant event have my bagground on it

I do what your pic and post says but again it is not working

?

Jimmy

Hi dpwl
Many thanks for the reply.
It sounded easy but it does not change anything

it is only the database that comes up and in files in dude is it still in the internal memory? Do I have to manually move some files?

Regards
Jimmy

Jimmy

Hello everyone I am in the process of running a new RB 1100 X4 which will be our new dude server. I've been running this dude v4 beta ever since but now it's time for upgrade. Right from the start, I've had a problem. The actual dude library is in flash? There is internal memory of 64 GB and I also ...

Jimmy

can't set antenna gain why set to regular domain? I use denmark ?

Jimmy

Hi MKX
Ya i no a lot can go worng so it will not be testet on live network.
I have setup a copy of the network here at home and i have try all what i cut find on google but no luck

I think i have reset the new router about 30 times now with defrent config

Cheers
Jimmy

Jimmy

Hello everyone I know this has been up before but I have another working network so I'm on it and have been fighting for a long time now without making it work. I have a functional network with 3 VLANs. all 3 VLANs have 3 different gateways. my VLANs are 2, 10 and 20 all l2 vlan on cisco. all my APs...

Jimmy

NO one have an idea?

Jimmy

Hi everyone in here. I have been running VPN SITE TO SITE for the last 13 years from my ccr 1036 to various hap lite and rb750 and it has run smoothly. My site to site today run L2TP with EOIP where I have all my VLANs out and added in EOIP. Now I would like to expand and have thought a lot of thoug...

Jimmy

I have the same issues both on PPTP and l2tp so I Kipp an eye in here....

Jimmy

Hello everyone I have used dude v4 for really many years and finally I bought some RB1100Hx4 and want to upgrade to dude V6. I'm having some problems :( I export a backup from version 4 as I normally do backup, and then I will impot it in v6 via: / dude import-db backup-file = dude / backup.2020.01....

Jimmy

ok i took the chance and upgraded my RB4011 to 6.46.1 and it did not go well :( I know I tested my speed over wireless as I have other non mikrotik WDS to run. It should be said that my 4011 is RB4011iGS + but after upgrading to 6.46.1 I had a download speed of about 37 Mbit and upload of 0.24. My i...

Jimmy

After upgrade my usb modem on RB951-2n not working?
It sat it is connected but no data at all

Jimmy

Hi Zacharias your post: Never mentioned as requirements in the first post NO i didn’t cuss in the Topic is say LTAP and my question was: Any chance that LtAP will be with external connector for 3,4,5G antenna in the further? I have many queries on this for boats and especially armored vehicles. I th...

Jimmy

Hi lapiso
That that rely look cool, and ya it is there so I gonna order for install.
It will be nice if this was made in the unit so you both internal and switch for external but this will do the work.
Thx for the post all.

Cheers
Jimmy

Jimmy

Sry m8 I see that now and you are right but again it is not the right way for good setup I need and it has no gps like LtAP?
I need a solid setup.
Cheers
Jimmy

Jimmy

Hi Zacharias
Like my post i am looking for LTAP with external connections.
The mant lte will not work for boats or vehicles.

Where do you see external connections on wap lte?

Again I need LtAP ?

Cheers
Jimmy

Jimmy

Any chance that LtAP will be with external connector for 3,4,5G antenna in the further?
I have many queries on this for boats and especially armored vehicles.

Cheers
Jimmy

Jimmy

Hi LewisH95 Yes i no about IEEE802... and my VLAN also work and all, but i need somthing there can tel me about how do i set this VPN server up? I have no problem with setting up normal VPN server to my domain and all, but how do i set up so wend i login to another VLAN then my domain with user grou...

Jimmy

Hello everyone I have a challenge that I have to give up a bit. I have a CCR 1036 I need to be a VPN Server. This is a bit spechael as I have to hit more L2 Vlan. 1. Domain Vlan (VLAN3) SSPT SERVER with radius and all .. 2. DISP1Net (VLAN 17) L2TP VPN setup with profile user in the router. 3. DISP2N...

Jimmy

Jimmy

Hello everyone I'm sorry to create a new one, but everyone else is from 2011. I really have a problem. I have replaced my DLINK router with a RB1100 and it runs perfectly on the internet, but my vpn clients to Work, do not work with this setup :( I'm using RB951Ui-2nD, here in there is a PPTP VPN (f...

Jimmy

Hello everyone I'm a little curious about multi vlan and dude? I have a pair of RB1100 X4 with dude server on. I have 12 VLANs on and it seems to work. What amazes me is: When I scan for devices in dude, I scan on server and it finds what I want on the ip / range I insert so everything works as it s...

Jimmy

?
I SAS hopning i cut ser power in DUDE from battery pack?

Jimmy

Hi
Is there no health on DISC Lite5?
/system health print

Cheers
Jimmy

Jimmy

Hi Anav Of cause I will post a pic and configure file. I wars working on last night and find one small error on a vlan in the config so I have sad it up in the company and it is working :) I will still post config and pic to share with other. I no there is many guid with multi subnet and one wan but...

Jimmy

hmm i do not understand this? I have work on the internet with these settings with no problems but now i have no internet on any vlan anymore ?? i have go back and back and forward again but i can't get it to work, so i rely search for help to get this to work.. Hope someone network people who will ...

Jimmy

Hmm my DMZ was worng so the only thing to add to the code is one more route = 0.0.0.0/0 with gateway ether1
All wlan, dhcp hotspot and trunk on port 4 and 5 to cisco are working and all vlan have only ether1 as wan.

Cheers
Jimmy

Jimmy

Hello everyone I am facing a huge challenge that has really locked me in and I really hope there are some who know how to get on with all the vlan on the web? I need to make an excited network more simple. Today, all sw cisco runs and each vlan has an independent linksys router that goes into a dmz ...

Jimmy

I am trying to setup one CCR1036 with SFP-T modules.
The CCR find them but i can't get ney link on them?
i have 2 models:
SFP-T 1000BACE-T SFP and SFP-GE-T-C

I have look in SFP WIKI and they are testet on a 2011 but not on CCR?

Any other there are runing this setup?

sfp mikrotik.jpg

Jimmy

hmm any others there are running dynadish 5 ?

Jimmy

I don't get it. For 11 years I have been running SEXTANT G between my 2 towers and was very fast at speed and when looking at the Registration table under wireless it was at 144/144 mbit. Now after just over 11 years I have bought 2 dynadish 5 and replaced with SEXTANT G and I am not achieving the s...

Jimmy

Ok i remove nat bug what shout that help?

Do i nede to make a one to one nat maybe?

Andy have a code example maybe ?

Jimmy

Hello ingdak Yes right now I have gone back to a simple router where my vlan5 domain is so called wan and my vlan2hotspot is on lan, and have not created anything else now. just to make sure, my 2 VLANs are completely independent lan with their own gateway, dhcp and everything that belongs. I have c...

Jimmy

Hello everyone I have tried searching google to find a solution to print over 2 vlan but did not make anything work :( I have 2 Vlan: VLAN5 = a small domain VLAN2 = A hotspot network with a hotspot server (Non-mikrotik) My whole network is cisco switches and all wifi and more are mikrotik, no probel...

Jimmy

I tried to find my old post but unsuccessfully. I really have a problem with connections that seem to connect to my VPN Server without seeing them active in the VPN itself but in the firewall filter and in log they are there, what should I do? Right now I have ip banned them but I can't keep that go...

Jimmy

No sorry i Will try it to morrow.

Cheers
Jimmy

Jimmy

The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit, so hopfull it will run as RB1100AHx4

Jimmy

standart router basic setup with cabel and Of cause 1gb. (if you see my config my wifi is distable :) lucky i have a RB1100AHx4 for test, and now i no i will bye a RB4011 bur it is still sad about the speed on RB2011 :( This is on RB1100AHx4 with same setup and same version and firmware :) http://dk...

Jimmy

I do not understand how you can get that speed? After update to 6.43.8 is the worst shit I have seen from mikrotik :( Back to DLINK Again :( # dec/28/2018 00:36:18 by RouterOS 6.43.8 # software id = 8N6V-6ATQ # # model = 2011UAS-2HnD # serial number = 419E02286B23 /interface bridge add name=bridge1 ...

Jimmy

I cut post a config but it is a standart router setup with no wireless so no need for config? I have A 1100 dude ready i Will try that, just for fore A try and in the new year i Will ordre A 4011 but it Will be Nice og any had try A 4011 on A Line over 300/300 Mbit to make sure it can handel it? The...

Jimmy

Hmm i get the same rely slow speed about max 200 mbit and poor 140 upload :( so back to DLINK router :( I rely hope mikrotik can come up with an update wend 2011 still to bye ? If I wars sure the speed wars ok I will go and bye an 4011 bye if it is the same as 2011 then it is to many mony to spend i...

Jimmy

But before you upgrade the speed wars good?

Jimmy

So you are using 6.36 and that is working ok?

Jimmy

Is there any news about this?
I have just put A 2011 on instade of my dlink router but i get rely pur internet speed

I have newst firmware and os on.
I have 500/500 Mbit internet and the rb2011 only have 197 Mbit Down and 121 Mbit up

On my dlink i get 514/506

Cheers
Jimmy

Jimmy

don any have these files now the site not working any more?

Cheers
Jimmy

Jimmy

Hi all
I got a RB 1100AHx4 and opgrade with 2 X 500 GB hdd i will use for dude.
Is there any way to chance the library for dude to one of the HDD?

Cheers
Jimmy

Jimmy

Hi CZFan The ROS is: RouterOS 6.42.2 i am running Cisco on my lan with trunk to ether5 all that is working with no problem. Right now i am only testing with the router no sw on and i am using wifi and ether 2 for testning to kiip all problem as lowest i can, and Again no internet on any vlan/port. T...

Jimmy

hi all I am trying to setup a router with 1 wan (ether1) end 6 Vlan, and i am relly lost now :( All the VLAN need to have internet access and vlan 1 and 3 need to send DHCP. My setup is a 2011UAS-2HnD setup as Router vith vlan and the rest of my Network is Cisco sw that is why ether 5 is trunk. Cisc...

Jimmy

Hi normis and thx for reply. I have block the api after I found out of it no problem. It is the TCP I don’t like and can’t see what it is doing? I have 4 vpn running and those ip’s I rely don’t like and it says it is connected? How and why? Those ip’s are denfenly not mine and I can’t understand it ...

Jimmy

Hi here inside.
I have been on a VPN Router trip and watched through and found this (see attached)
I know about the API and it is off now, but I do not understand those who come via TCP what does that mean? There should only be VPN Traffic on this router?

Regards
Jimmy

Jimmy

Hi all I no there have bin a lot of post about trunk on sxt and cisco, normal I find out of all this on sw and more but now I have little issue  I am running my backbone sextant G ptp to sextant G and relay point where I have 4 SXT SA5 to many sites. They are setup as normal start guid https://wiki...

Jimmy

I have just forward this from http://forum.mikrotik.com/viewtopic.php?f=8&t=110890 sins it have nothing to do with dude but update of routeros ... Hi all After upgrade of my CAP2n i cant use Number of Wireless Clients http://wiki.mikrotik.com/wiki/Number_of ... ss_Clients In the past i had no pr...

Jimmy

Hi all
After upgrade of my CAP2n i cant use Number of Wireless Clients http://wiki.mikrotik.com/wiki/Number_of ... ss_Clients
In the past i had no problem? Is there anything there have chance?

Cheers
Jimmy

Jimmy

Hi all I am trying to setup capsman instad of my normal setup. I am upgrading my network wen i have all from hp to dlink dap AP, and now i will chance all AP to mikrotik. My problem is i am running 3 to 5 ssid on every ap and this working fine but now i will try capsman to get my work. I cane see wh...

Jimmy

It is working. The usb create a new lan interface so all is working now

Jimmy

Hi mikrotik I am trying to have some VPN site out in the Feld and many times we have to use 3g dongel and here is my problem. Wend we are in other country the price of 3g is up so I need something there can tell me wend I have uss 1000 mb data in download. Right I am using rb750up but a router board...

Jimmy

Hi all.
Is there any out there there have Try a ZTE MF93E on routerboard using usb ?
I vant get any thing to work with This ZTE MF93E.
All other usb modems no problems ?
Cheers jimmy....

Jimmy

Hi all in here. Earlier I have made the post: http://forum.mikrotik.com/viewtopic.php?f=13&t=99597 but this is a complete wrong conf  and I rely hope someone can help me out here. I am running my network on cisco switch and normally I use ap from DLINK where I use 3 WLAN on 3 ssid and it works ...

Jimmy

Hi all in here. I rely need some help to setup cap 2n with primary ap and 2 virtual ap there are running with VLAN 100, 200 and 300. My switch is cisco and port to cap from cisco is trunk with VLAN 100,200,300 and VLAN 999 for no use. My setup on cap is: /interface vlan add name=vlan1-ether1 interfa...

Jimmy

Hmm and the cable have to Be 50 m so that Will not Work

i thing my setback is back to normal mode with poe on singel cable to stx

so mucth for the new 750 in box

Send from mobile phone

Jimmy

Hi in here. I have a Little Q. I will make a little setup with 1 750UP and 3 STX SA5 running on POE. My Q here is now: On the 750UP there is a power connecter, but I need to have the 750up in top of the 30 m antenna, that is a long way, so what is the deferent between power connecter and port 1 POE ...

Jimmy

Hi pukkita
Thx for reply.
New Q.
If i set 4 sxt 14 db on same ssid what about frq? Cuss if i use same frq on all 4 Will that be good ?

Send from mobile phone.

Jimmy

Hi all. I have seup a new point with 4 x sxt 5 14 dbi and set up with ap and acl no problems. Next i have 15 sxt 5 to give out to unit in the feld. My q is: Is there a way where the unit just can point there ant to my multipoint and it Will connect on auto? I kan only get it to work with 1 ap so if ...

Jimmy

new ip to dude? are you on it local or remote?

Jimmy

Hmm Sextant 5G is that not working?

Send from mobile phone

Jimmy

From my point, I have bye a six pack stx and only one has this problem, so in my case it is the hardware.
My point wars to complete reset and put new firmware and all again, but it is still the same, 6mbit lock?

Cheers
jimmy

Send from mobile phone

Jimmy

I had This problem also but Lucky i had One stx left from my six pack. I chance the client site and after that no problems. There have not bin any issues after I put the new stx on. I have the old (old it is not only 20 days old) with me and all settings is is the same but wend I put the old on agai...

Jimmy

Ok i give up

i can't get it to Work

efaden are you the man for a littel help, cuss i rely need it now

My contact is dk-f55@hotmail(dot)com

Cheers
Jimmy

Jimmy

HMM i can't get any of this to Work, i follow the http://wiki.mikrotik.com/wiki/Manual:Interface/EoIP but no link

Can you maybe post an ex from my pic plz?

cheers
Jimmy

Jimmy

Hmm to start with I am stock with IPSEC Firewall Rules :( Next I am stock with one big lan only cuss what to route? Again I no I have a lot reading to do, but right now the time is up, and that is also why post in the beginners forum to ask the hardcore users in here, cuss I am sure it will only tak...

Jimmy

ya, the problem is i need one big lan with sup 255.255.240.0 where i have dhcp ind only one end, maybe it is to mucth, cuss it ditten work, but i am trying in 30 main again.

Jimmy

Hi all I am sorry for posting this, but I have rely no time left, and I rely need help, I no I have a lot reading to do, but I have to try asking the hardcore in here. I need to setup a Site To Site VPN like the pic in here. I know it is not the best way to do it, but We are closing down one office,...

Jimmy

The Big q in This One. Can you make VLAN on your nethear? If no then you wil have to replace all the netgear you have where you need to have 2 or more VLAN running

Send from mobile phone

Jimmy

Sorry to bring this up again, but I'm a little lost? cisco to cisco with S-31DLC20D does not work, but CCR with Cisco mmx spf works without problems, so it runs. The big question now is why does ccr or other mikrotik with SFP S-31DLC20D not Work with Cisco mmx SFP or other Cisco with 1 Gb fiber, it ...

Jimmy

Ya i notes the SA model has 1000 mbit on. But what about SXT-5HPnD can it make up to 100 mbit? I just got a sexpack but my test ONLY got up to 39 mbit. Again it is a test in a room, maybe it Will g'et nettet wend i deploy them i hope ? My setup here is 1 point to point with pnly SXT-5HPnD. Cheers ji...

Jimmy

A little help to understand SIXpack: http://routerboard.com/RBSXTKit From the link: SXT-5HPnD is a low cost, high speed 5GHz wireless device. It has a dual chain antenna and supports 802.11n and Nv2 TDMA technology to achieve 200Mbit throughput speed ! Complete with a ready to mount enclosure and bu...

Jimmy

Am I wrong here, why can you not run WDS on L3?

Jimmy

To start with i had 6.1 out of box on it, still it said current-firmware: 3.09 and upgrade-firmware: 3.08.
Now i have updatet to V6.4 only cuss i am still using it as a test but still it say:
current-firmware: 3.09
upgrade-firmware: 3.08

Cheers
Jimmy

Jimmy

Yes i no, but what can i upgrade?

current-firmware: 3.09
upgrade-firmware: 3.08

Jimmy

I was just in to opgrade firmware on my new 211UAS, but this show up? [admin@TEST SW/ROUTER] > system routerboard print routerboard: yes model: 2011UAS serial-number: 427102DA06CF current-firmware: 3.09 upgrade-firmware: 3.08 [admin@TEST SW/ROUTER] IS that right? Cheers Jimmy

Jimmy

Just to close this one, i put VLAN 999 as native vlan but forgot to put the vlan in the trunk, all are working and running perfect with mikrotik and Cisco.

THX for good support.

Cheers
Jimmy

Jimmy

hmm i need to read more in to this.

THX

Cheers
Jimmy

Jimmy

Hey honzam ya i trying to read, but still i have a Q. antenna-gain (integer [0..4294967295]; Default: 0) Antenna gain in dBi, used to calculate maximum transmit power according to country regulations. I rely don't understand this, cuss how dit dbi end up with transmit power? I say antenna-gain and m...

Jimmy

Hi all I have 3 small question. I have set up 2 SEXTANT G 5HPnD antenna up over 7 Km, but it is not running so good, it is stable but rely slow speed, so now we need to repoint again. I spend some hours to day on one end to get better signal, but still it is only -89 db, but I am working on it, but ...

Jimmy

Hmm still not working :( To start with this setup I do not get any dhcp? Then I setup trunk on cisco to allow VLAN 1,5,6,999 and set 999 to native VLAN then I get dhcp on brigde-vlan1 but still no dhcp on vlan6? PLZ I am open for all now, cuss I really need to get this CCR up and running. Cheers Ji...

Jimmy

Hi Rudios No and sorry for not try that out, my bad, and i will try it out first thing in the morning. I rely like your option nr 2, it is rely easy to handle and easy to look at for other admins there need to log in to the CCR. Just to make sure, sins I do not need that many VLAN, is this the right...

Jimmy

I rely need help to my CCR, and from my post: http://forum.mikrotik.com/viewtopic.php?f=13&t=75922 to program my CCR to work with cisco trunk, I have no luck to get dhcp on my interfaces :( I have dhcp on vlan 1 and vlan 6, and it look like the trunk from spf is working sins I can connect to my ...

Jimmy

Hmm no ping
I can ping the ccr there is connect from trunk so again no problem on the trunk, and i can See all in the dude too, so it have to Be the vlan, but the Big Q WHY cuss if the trunk is working then the ccr can filter the trunk?

Cheers
jimmy

Send from mobile phone

Jimmy

Hmm the trunk is working but any of the vlan is not working? Wen i conect a pc to any of the port i do not get any ip. All my lan have a dhcp server but no ip on any port of the ccr. I can see both tx and rx on the trunk but not on any interface ? Are we sure the ccr can See the vlans from Cisco? Pl...

Jimmy

Hi all
I am still working on a test setup with these settings, but now i have more Q ?
On Cisco i have IP on vlan2, where do i set it on th CCR? do i need to set it on a interface, cuss it will not Work on VLAN2?

Cheers
Jimmy

Jimmy

Hi Rudios
Damm I love a good support forum, I will try this first thing in the morning.
THX for quick reply.
Cheers
Jimmy

Jimmy

Hi all I am lost on CCR1036-G-4S and VLAN. I have a TRUNK coming from CISCO 2960 to SPF 1 on the CCR The trunk I have 4 deferent VLAN EX. 2 3 4 5. Then I need to crate VLAN 2 on port 1 VLAN 3 on port 2,3,4,5,6 VLAN 4 on 7,8,9,10 and VLAN 5 on port 11 and 12. SPF2,3,4 has to be trunk to other CISCO 2...

Jimmy

hmm no I have not tried S-31DLC20D cisco to cisco, but I try this Monday.
Does anyone know about CCR1036-12G-4S can run on Cisco mmx spf?

Regards
Jimmy

Jimmy

Hi All I just bought a CCR1036-12G-4S and floated it up with S-31DLC20D, and still have some left over. I need this for our DMZ, and the rest of the network run cisco. My problem is I do not get link on fiber connection? Can the fiber not run with cisco? I have also tried to set an S-31DLC20D in cis...

Jimmy

Hi all I need help with DLINK DAP-2590 on dude. I am trying to put in so i can see Number of Wireless Clients in dude. I found this on mikrotik: http://wiki.mikrotik.com/wiki/Number_of_Wireless_Clients Is there any way i can see how many clients on DLINK DAP-2590. I am new to all this, and i have tr...

Search found 114 matches