Someone can help?

Which would be a recommended VPN option for a Asterisk Voip service over the VPN between several branches in an enterprise

Are you sure that it was not because of the asymmetric nature of the subscriber line that the clients used? All in all I have good experience with MT VPN solutions including openVPN since version 5.x when it became stable for the first time. However under some circumstances vpn seems to become unre...

Hi, I'm planning to implement a Hotspot with User manager UM, with a RB750 (Lv4 Lic) or RB450(Lv5 lic) for more than 80 users, but I dont understand exactly the license limits for UM here http://wiki.mikrotik.com/wiki/Manual:License : If would be the case that UM for RB750 and RB450 does not allow t...

Hi, I would like to know which Openvpn bridging or routing mode fits best for what I need. I'm trying to implement a Central office and several branchs, the service trough the VPN are VOIP(asterisk) and Domain Controller (Windows Active Directory) with servers in the central office branch. What do y...

Could you post your config please? I'm having an similar problem with a OPVN, but I cannot ping LAN to LAN.

What if you try to put your mail server in other network? like 172.16.1.5 in other port and network of your mikrotik router.

maybe as this rule is not passing the router, is not changing the dst address.

what is the gateway for you pc with ip 192.168.1.3 ?

in the masquerade rule, in this case is not necessary to specify src address, just masquerade the out interface so:

Are you using a rule for NAT masquerade?

Someone please can help??

Hi, I'm getting the same error. Did you fix it?

what does traceroute from client say?

thanks for your help, I find the anwser here

http://forum.mikrotik.com/viewtopic.php?f=14&t=43460

Hi, I'm using a RB450 with License Level 5 with hostpot and user manager, since usermanager Lv5 limitation is for 50 users, I think that I will need License Level 6 for unlimited users.

So the question: Is the license level upgradetable for routerboards?

I'm testing a Load Balance configuration like the next link:

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

It works ok, but after I setup the hotpost on the LAN interface it does not work and there is not access to Internet.

somebody can help?

thanks

I agree, because I did not find any magazine related to what I interested. Except a suscripbtion to Linux Magazine

So the next blog's with practical guides help me a lot

http://aacable.wordpress.com/

http://gregsowell.com/

you can take a look here:

http://wiki.mikrotik.com/wiki/Forwardin ... nternal_IP

Did you mean I must be able to connect or I must use crossover cables?

I do not think that you have a cable issue, so maybe something is blocking ports like a firewall or antivirus. Did you try with other computer?

You must if there is a firewall or antivirus running on the computer, disabling them and try to connect again to router.

What about the perfomance of opnvpn with mikrotik for multiplesites?

You might consider starting with this book, which is oriented around the MTCNA certification. http://learnmikrotik.com/index.php?option=com_content&view=article&id=151 -tp I'm ordering this book, because I'm planning my MTCNA test for the last week of February. Does anybody has something to...

If you have a backup file, here is a way:

https://aacable.wordpress.com/2012/01/1 ... -password/

maybe this will help
http://wiki.mikrotik.com/wiki/PPTPClient

nope, I think as you are using IPSEC on your cisco router you must check this info
http://wiki.mikrotik.com/wiki/Manual:IP/IPsec

you can also this option RB1100AHx2 dual core!

Yo can check mirkrotik's catalog, RB1200 seems to be one of the most robust routerboards

Dear all
i have instulled the O.S 5.9 for usermanager and the problom that i have it that i can not access the usermanger through http
can anyone help me with this
thanks

If you are running hotspot, you must specify another interface that is not running hotspot to get access to User Manager

Can someone please explain what is the use of coa and validity (in profile limition) in user manager, I checked the doc, but I did not found this info.