Problem in 7.16.1. If you do not list items, the script does not recognize the next ones. This is also visible when executing in the console. [admin@InfernisGigaSwitch] > /interface/wireless/access-list/remove numbers=0 [admin@InfernisGigaSwitch] > /interface/wireless/access-list/remove numbers=0 no...

Linux version 4.0beta12:
when you hover the mouse over a shortcut (e.g. R) in interfaces - it does not show the expansion.

You mean the absence of tooltip, right? I'd suspect this is not implemented in v4 yet.

Yes.

Linux version 4.0beta12:
when you hover the mouse over a shortcut (e.g. R) in interfaces - it does not show the expansion.

Maybe in log debug for IPSec you will see something ?

Local and Remote address is public or private ?

My ROS 7.13.2

You have configured tunnels on both sides ?

It works. I set up such tunnels. What configuration do you have?

ROS7 style
/system/scheduler/add disabled=no interval=24h name=wol on-event="tool/wol mac=xx:xx:xx:xx:xx:xx interface=xxxx" start-time=07:00:00

I checked this. It's works.

BTW: how to mark post with "Solved" label ?

Like @holvoetn said. Contact with support - i had similar problems with 'old' forum account etc. If you know your login or email address used in forum acoount- they will definitely help you. Let me know.

How much meters have this 'long cable'. I heard about 8m. PoE-In and PoE-Out has this same limitation ??

Where is Release Note for RC2 ??

Ok, SMNP lets work after next step:
1. Chekbox "Enable" in SMNP turn OFF
2. Reboot router from menu
3. Chekbox "Enable" in SMNP turn ON
4. OIDs can visible from DUDE scaner and Zabbix

Fixed it for me

what is meant by this word - networking in tools -> profile.

I see every minute jump to about 50 percent - literally for 10 seconds. Could this be related with SNMP Trap ??

Thanks.

No problem.

'on alert' section:

TikTube Mum Live:

Sever not found rtmpt://54.220.186.255:80/live/_definst_

Maybe someone had this problem ??

That's work. Thanks.

There are multiple ways how you can get it without using 'get': 1) using '/system logging action add target=email'; 2) using $interface, $mac-address and $address variables in dhcp-alert We will add this in the list of things to do. John Everything works in ROS 6.4 but variable $mac-address is inva...

How to configure RB to get some extended logs from nstreme-dual links. Someone know how ??

OK, why in AP mode we have: /interface wireless print oid 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.1 rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.1 ssid=.1.3.6.1.4.1.14988.1.1.1.3.1.4.1 bssid=.1.3.6.1.4.1.14988.1.1.1.3.1.5.1 client-count=.1.3.6.1.4.1.14988.1.1.1.3.1.6.1 frequency=.1.3.6.1.4.1.14988.1.1.1....

OK, why in AP mode we have: /interface wireless print oid 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.1 rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.1 ssid=.1.3.6.1.4.1.14988.1.1.1.3.1.4.1 bssid=.1.3.6.1.4.1.14988.1.1.1.3.1.5.1 client-count=.1.3.6.1.4.1.14988.1.1.1.3.1.6.1 frequency=.1.3.6.1.4.1.14988.1.1.1....

Thank you for your response. At least I know what to expect.

Somebody send Speedtouch 330 to Mikrotik ?? I'm interested in to add support for this device in RB's devices

Thanks for advice. We will see.

Can I connect RB250GS to one of PoE-Out ports on RB750UP ??
In this document
http://wiki.mikrotik.com/wiki/Manual:Po ... ed_devices
I do not see that combination.

I have the same problem on RB711 with serial number /145.
`TX signal` drop from -67dBm to -91dBm