When resetting the router configuration, WI-FI interfaces are disabled by default. Developers also need to disable the LTE interface by default. This will be logical and will solve this problem.

Crash on Windows 7 SP1 with popup message "Entry point not found: The entry point to the CreateDXGIFactory2 procedure was not found in the DLL dxgi.dll ."

So you propose to take a coder off of the RoS software team to focus on this.................... yeah not likely. It’s just a matter of one evening to implement ICMP-knocking. I ask exacly same things some years ago.... https://forum.mikrotik.com/viewtopic.php?p=868519 I had to write the same discl...

For those who read diagonally, I will repeat it again. I propose to integrate knocking (port or icmp) into Winbox itself, because Winbox already has an “Address Book”! You select the desired address to connect, the Winbox itself sends the specified knocking sequence and then connects. All. Well, or ...

funny incident Yes, I remember such a vulnerability in the protocol, but that was a very long time ago and the protocol was replaced with a more secure one. Of course, we can also use a VPN for better security and peace of mind. :D Knocking is very useful to protect public routers from scanning and...

Well, VPN may be inconvenient if you use random computers... It is not always possible to update ROS. It could be a weak router, like hAP Lite, or it should be uninterrupted operation, or it could be, for example, a radio bridge. Lots of options... I believe the Winbox protocol is quite secure. Do ...

I use the same thing for remote and emergency access only since many years. Hi ! Thanks for the examples. Yes, I am aware of this technology. The problem is inconvenience. It would be great if Winbox itself did the specified knocking when connected. In the end, Winbox itself is designed for conveni...

Problem: I have routers with open (and non-standard) Winbox ports, where it is inconvenient to create a “white list” for administrative connections. But modern slow scanning spiders still find these ports over time. I use ICMP knocking through a Windows CMD file, but this is very inconvenient and sl...

Installing CHR on VPS hosting with GRUB loader Instructions are given for hosting vpsserver.com as of 2022-03-01 Hosting is distinguished by the presence of pre-installed Grub in Linux systems, the primary loader of which is loaded over the network (PXE). The user's system must therefore contain a G...

As I understood on my link with SXTsq Lite60, the problem lies in the implementation of Beamforming. At cheap devices, there is no hardware tuning, and Mikrotik implemented software tuning with an internal script. The device regularly measures the signal strength (as I understand it) and at some low...

Use Routing Rules

Changed the design of the panels in Winbox, and not for the better. Became scary and very uncomfortable. Return back, please, as it was in versions for 6.10 inclusive.

With greetings from participants forum.ixbt.com

Quite a lot of information about this modem has a forum
http://4pda.ru/forum/index.php?showtopic=315938
(russian language)

I confirm. I tried to run Huawei E352b (by russian 3G provider Megafon) on the x86 system (s775 Core E8200 & Intel P43) under ROS 6.7 and it work properly with the settings info & data channels = 0 . On my RB493G, unfortunately, I was unable to test the modem due to the lack of regular power...

Compiled and works 2WAN x86-based router Jetway NF99 (Atom D525 / 2h82574L) equipped with a daughter card AD3INLAN-G (3x82541PI) pictures . Both insertions are used as a WAN, the daughter's nic's combined bridge and used as a LAN. Distribution and receipt of about 150 Mbps real torrent traffic, as w...

No, only four active link and a regular on an Internet surfing. But even in this mode with 24V PSU uptime does not exceed several hours.
"Native" 24V PSU tried two things - with both equally unstable.
p.s. It is still checking PSU. Ahead - a study with an oscilloscope. ))

Stability test with a pulse PSU Powertron PA1008-2DE 12V/0.5A is successful. RB450G uptime 5 days.

janisk Transformer PSU used DVE DV-1250UP 12V/0.5A 450G when operating this PSU at idle consumes 0.36A with running Metarouter and 0.31A with a stopped Metarouter The problem with the electrolitic capacitors Suxxon me know :) see here and here . These capacitors from the main DC/DC converter (7...2...

the frequency of reboots of the board is not connected to PSU in any way, of course, board has to have enough resources. It was tested at full CPU load. Maybe ... However, with a 12 volt transformer PSU 450G uptime for over 5 days. However, I did not banished tests this time, but with a 24 volt PSU...

Perhaps the problem is really in miscalculations in the design of power converters on the routerboard 450G. With a standard external power supply DVE DSA-20P-20 24V/0.8A router, when running metarouter, was unstable and often restart at arbitrary times, even in idle mode. ROS 3x, 4x, 5x - no differe...