MikroTik

TymeWyse

Yes, after updating (x86) to 6.13, simple queues disappear. Re-boot, they show up and slowley disappear again. Jeff ----------------- Just upgraded from 6.12 to 6.13 (x86). From the Winbox -> Queues -> Simple Queues - the list is empty. In the terminal/ssh it's ok. Anybody with the same problem?

TymeWyse

I have MT Router OS v3.23 with simple queues set up for my system connected to a T1. I am adding bandwidth from another location. I have a RB450 in a remote location with the other connection. I have the ip addresses set on the RB450 and from what I have read, all I should have to do is to put the I...

TymeWyse

I have a MT Router OS 2.9.50 running the hotspot feature which has a main gateway to the internet via T1, it has been working just fine. The RouterOS unit has 3 NICs (NIC1) the public connection(my T1), (NIC2) my private IP range 10.2.2.x (Hotspot) and (NIC3) a connection for the new link 192.168.50...

TymeWyse

I have been using the hotspot feature for some time on my network but since I have grown I would like to just use the simple queues.
Can the hotspot and simple queue features be used at the same time.

Is there an easy way to change this?

Thanks.

Jeff

TymeWyse

If a user is setup within the Hotspot feature and limits are set, will the IP Binding feature use all of the profiles set and limits within hotspot?

Curious..

MT 2.9.50

TymeWyse

I have the hotspot feature running for my wireless network. I issue static IP addresses for regular customers and would like to bind the IP address so they can bypass the login screen. When I do this the user will not showup in the hotspot manager for active accounts. Is there a way i can do this to...

TymeWyse

I have a small wireless network. Presently I have MT v 2.8.28 but over the past week items have failed. At this time I can not log into the MT router at all unless I am connected to that network. The entire network was run thru the hotspot feature using the DHCP server within MT. This part has now f...

TymeWyse

Is that a separate add on or is it with the package. Sorry for the dumb questions.

Never mind I found it... thanks..

Jeff Kratka

TymeWyse

I have been running a small wireless ISP using the Hotspot feature only with MT v2.8.28. I have built a new unit using v2.9.45 and would like to set it up where people that are regular customers can just log in with a particular IP and MAC address to be on all the time without having to open the bro...

TymeWyse

I have a problem/question that just came up from a customer. They connect to my network via the hotspot feature in Mikrotik. From there they connect to their Exchange server with Outlook Web Access. They will connect to their exchange server and enter their username and password from the pop-up but ...

TymeWyse

Hello, Sorry for ythe repost but I'm trying to figure this out. I have a problem/question that just came up from a customer. They connect to my network via the hotspot feature in Mikrotik. From there they connect to their Exchange server with Outlook Web Access. They will connect to their exchange s...

TymeWyse

Try to log to the windows with user and pass same as on the outlook and use MSIE.

It is the same with Internet Explorer and Firefox.

Jeff

TymeWyse

Hello, I have a problem/question that just came up from a customer. They connect to my network via the hotspot feature in Mikrotik. From there they connect to their Exchange server with Outlook Web Access. They will connect to their exchange server and enter their username and password from the pop-...

TymeWyse

If you've got the hotspot generated static rule for "transparent HTTP proxy for hotspot clients" in the dst-nat chain of your firewall, try disabling it. Nearly every problem we have ever had with 2.8 and the hotspot (both end-user web surfing and internal crashes) was solved by disabling...

TymeWyse

Are you using the Hotspot package?

Yes I am.

Jeff

TymeWyse

For some reason now, when I attempt to go to one particular site I receive an error message: Error 502: failed to receive headers in response . This was brought up to me by a customer and this is only happening to this site when attempting to access it thru my Mikrotik machine. I have not changed my...

TymeWyse

For some reason now, when I attempt to go to one particular site I receive an error message: Error 502: failed to receive headers in response . This was brought up to me by a customer and this is only happening to this site when attempting to access it thru my Mikrotik machine. I have not changed my...

TymeWyse

Sorry, the 2.8 hotspot does not have this feature. You can try to get around it by mangling the packets from your "bypass-customers" with a mark of "hs_auth" (I think - 2.8 is gone in my mind ;) please check the manual or the firewall rules created by hotspot in 2.8). This will ...

TymeWyse

The 2.9 (!) hotspot does provide a feature called "ip binding". This let's you enter IP addresses and/or MAC addresses that should bypass the hotspot, i.e. no hotspot authentication at all. Does that sound like what you want? Best regards, Christian Meis Yes it does. Can v2.8.28 do this a...

TymeWyse

I can't really understand your question, however you may use HotSpot MAC-authentication method. User will not be required to type login and password, but his MAC-address will be used automaticaly as username, description here: http://www.mikrotik.com/docs/ros/2.9/ip/hotspot||0.10738002166439034 Is ...

TymeWyse

1) you may use ARP table with arp=reply-only on interface, and IP addresses and MAC-addresses binded in static ARP table, another scenario to use firewall rules. Do I do this with the hospot feature also. I would like to be able to limit bandwidth usage also. 2) HotSpot is a very advavanced method ...

TymeWyse

Sorry for the simple questions, I am still getting use to MIkrotik. I have a small WISP which I have the hotspot feature running. I would like to be able to have regular users log in without the hotspot feature and . I would like to have it set so I can fix the IP addresses and MAC address. Can some...

TymeWyse

When upgrading from 2.8 to 2.9, do NOT use the all in one package. The first time it boots as the version upgrade occurs, it ONLY installs the system package from the all in one package, nothing else. If you can get access to the unit again, install the all in one package a second time and it will ...

TymeWyse

I have a very basic hotspot system set-up. clients log into the router and add their username and password. At this time I can not get the log in screen at all so I can not browse.

To get a basic firewall running to allow people to get on line what would be a simple set-up.

Please... :oops:

TymeWyse

i think, 2.8 would not solve your problem. May be describe more detailed, what configuration does not work. It looks like the entire network has stopped working. I just downgraded to 2.8.28 but the back-up I have did not re-set-up the firewall. What I have is an AP going to the MT pc with RouterOS ...

TymeWyse

How do you downgrade from v2.9. I installed it this morning and am having some major problems, (network doesn't work)

TymeWyse

i dont know :oops:
OK Maybe this will help. I am using the Router OS on a pc in the Hotspot mode. The Router os does DHCP and authentication and management only.

So far it has been a VERY BAD DAY !

Not completly back. I have to re-set-up almost everything. The back-up just loded the users..

TymeWyse

i dont know :oops:

OK Maybe this will help. I am using the Router OS on a pc in the Hotspot mode. The Router os does DHCP and authentication and management only.

So far it has been a VERY BAD DAY ! :cry:

TymeWyse

try wireless legacy package....

Can I just upload the older version of OS and downgrade? then work on it from there?

TymeWyse

first problem report for 2.9.....nice version :lol: what about your router?it is pc router or routerboard?

It is a PC Router

TymeWyse

I just went to do an upgrade to v2.9 and as soon as I did it , it broke. Can not lok on to the wireless network. I can log into the winbox but not on to the wireless network. I know it's a simple thing but ... HELP !

TymeWyse

I am using a MT OS and am having problems with mac filtering enabled. The problem is that when I have people using Tranzeo CPE's logging in the MAC address, of the NIC is being from the machine and not the Tranzeo.

How do I get MT to use only the MAC address of the CPE

Any Sugggetions

Jeff

TymeWyse

The CPE's and the APare running in bridged mode. I just got off the telephone with Tranzeo and the CPE-80 and AP-4115 do not have the feature to change which MAC address to use, that comes on different CPE's. Excuse my lack of knowlege on this but besides the Hotspot feature and DHCP, do I need to r...

TymeWyse

I am running the hotspot feature and having users log in with both username/password and MAC adresses. The only problem is that the MT machine is pulling the MAC address off the users NIC and not the radio. All people are using Tranzeo CPE's. How do I get MT to only see the MAC address of the CPE an...

TymeWyse

Hello, I have a small wireless network setup and have hopefully an easy question. I am using the Mikrotik Router OS and am using along with the hotspot feature trying to do MAC filtering. I am noticing that at times the end user logs in using their CPE's (all Tranzeo) and sometimes it picks up the M...

Search found 35 matches

Re: v6.13 released!

Help: multiple route question

Multiple Gateway issues

Hotspot to Simple Queue

Hotspot User and IP Binding

Hotspot and IP binding question

Simple Queue/ Hotspot help

Re: Simple Queue and Hotspot?

Simple Queue and Hotspot?

Hotspot and Outlook Webmail

[Repost] Exchange Outlook Web and MT

Outlook Web Access and MT Hotspot

Error 502: failed to receive headers in response

Odd new Error Message

Hotspot and User logins

Help Please. I need some help with a firewall

Downgrading from v2.9

HELP ! Upgraded to v2.9 and broke it

MAC Auth. problem

MAC Auth. problem

Mac Filtering