I have problem to delete all sessions from Userman.Running script /tool user-manager session> r numbers: 1-9000 Didn't help me,only CPU goes to 100% without clearing anything from userman.
Please advice how do you solve that issues. I have 250000 session i need to clear them asap.
Thank you!!!

Same prob. on some of my routers MIPBE and CCR all version 6.19..on some lan ports RX overflow
Any help from Mikrotik GUYS will be helpful..
Thank you

Anybody !!!
Please reply!!!

Hi,
I have checked on my CCR1016 an ARP list and I see there 200-300 public IP's records that not belong to my subnets.
What is that ? an Attack? or they should be there?
My router acting as 4WAN loadbalancer andd pppoe srvr.
Please advise !!!
Thank you

Dear Gurus, I need Help!! just now unpacked new CCR 1016 from the box and is't worked only 2 min and stuck.after reboot I see only ''loading kernel from nand "" message on LCD. Try to reset not help !! :( Try to Netinstall not help !! :( How can fix this issue before RMA to supplier. Pleas...

Thank you for reply, I find many examples but there not clear what where to place,every answer is more complicate than previous and more of them unanswered at all. Maybe some good peoples from Mikrotik can give us any advise what where to place.My setup is very easy RB1100AH with 4 16/4 Lines doing ...

Hi, Need help on how to setup QOS in router with PCC loadbalancing (source address classifier) in same router . If ist possible ?! Then what chains to use and where place mangle rules? before or prior PCC balancing rules? Its ok to use L7? I think I am not alone who doing similar configs on routers....

Hi all,
I have strange issue, cannot access my clients CPE by IP provided from pppoe pool,I can ping ,traceroute but no access to CPE GUI.
I am using RB1100AH v6.7 with 2WAN ,loadbalancing PCC and pppoe server on same router.
Please help,
Thank you in advance

/ip firewall filter add chain=input comment="default configuration" protocol=icmp add chain=input comment="default configuration" connection-state=established add chain=input comment="default configuration" connection-state=related add chain=input comment="WinBOX a...

Hi all,
I have strange issue, cannot access my clients CPE by IP provided from pppoe pool,I can ping ,traceroute but no access to CPE GUI.
I am using RB1100AH v6.7 with 2WAN ,loadbalancing PCC and pppoe server on same router.
Please help,

Hi all,
I have same problem with 2 Fiber Optic 4/24 Mbps links with /29 subnet on ISP's hardware,I can use the rest IP's. Cannot loadbalance with PCC. Any help will be appreciated.
Thank you in advance

aacble's script is not complete there is many thing needs to be change and is not work in my case.I don't understand why Mikrotik didn't provide us full ready configurations script for all cases in routers.Need to faith to find out solutions ......
Any help appreciated !!!!

Hello ,
I cannot setup loadbalancer with 4 pppoe-out connections from same ISP. I have 4 ADSL 12/2 connections with bridged modems and now I using cheap TP-LINK loadblancer , need to swap to RB450G .Can you help me guys to setup this router to act as loadbalancer.

Thank you in advance!!!

Guys, I need help with RB1100AH, I need the below setup 1 port WAN 1 port LAN >>Local DHCP Sever PPPOE server The rest ports use as switch . I get confused from where to start, how can I use ports 11-12-13 ??? 1-5 is first switch group 6-10 is second switch group May I use jumper cable to switch the...

Follow this link http://wiki.mikrotik.com/wiki/Manual:User_Manager

Thank you!!!

Dears,
I have question about compatibility of UBNT with( Airmax ON) product as AP's with Mikrotik SXT as CPE(PPPoE client)
Anybody try this combination???
Please advice...
Thank you!!!!

Hi, Thanks for provided link!!! But there is not really clear for me how to do in my scenario, the problem is that I cannot access my ADSL routers its locked by my ISP. So I just getting one internal IP by DHCP from each routers and all IPs is different for examp. 192.168.1.10 from one ISP and 192.1...

Hi !!! I need some help or advices how to setup Load Balance Router on my MK RB750G. I have 3 different ISPs with ADSL (8M/10M/10M speeds ) lines with static external IPs. I can't access my ADSL routers they are locked by my ISPs so i don't have any PPPoE username and password.I just getting interna...

Thank you guys for your helpful posts !!! I really appreciate your advices. If you have any more good network architecture, please share,help me to build best and stable WISP network. I will go for MK RB1200 as main router and will use internal UM and Radius. My radios AP RocketM5/ Ptp Links Grids/N...

Thank you for response!!!
Then i go to buy RB1200 ,there is an option to switch ports and attach directly my radios or there is any other way to do????
I know how to run hotspot with Radius and UM ,but i don't really know how to make reachable for my 4 radios.
Please advice !!!
Thank you in advance

Hi All!!! I am planning to setup a small WISP for 100 customers within 6 km range. I like to use use RB450G as hotspot server with UserManager and Radius to control my customers.My radios is 4 pcs Rocket M5 with panel antennas. My question is: How to connect correctly my radios to RB450G and run hot...