Ok I tried it now time 1400 instead of 1450 but without success. I myself have indeed no problems to connect to the LAN that is connected behind the Mikrotik, but really only directly on the Mikrotik via PPTP VPN this works for a few seconds or maximum 2 minutes and then stops. A new connection is i...

Please post a screenshot of settings the firewall and the NAT settings of your router.
You may be there, the error buried.

If I am connected me to the PPTP VPN Server in my MikroTik externally and then start Windox with a private address over the PPTP VPN I have repeatedly dropped connections. This clever with me for an update from V6.3 to V6.10 or V6.11 also. On 6.3 i was OK. But I come across a PPTP server on the loca...

I still have the same problem. I have made a reset of the 433GL today again and I have only set the port 2 of dhcp client and “ /ip firewall nat add chain=srcnat src-address=192.168.88.0/24 action=masquerade”. That’s all, what I’ve done. More I haven’t done at all. Will I have to do some more settin...

until now the problem still exists. Does anyone have an idea for me because I despair yet

Hello, I test it with 100 Mbit/s and with 1Gbit/s fix speed already and it change nothing again 30-35 Mbit/s. On the Modem I use always Port 2 (Bridge Port).But not directly normally with a switch between, because I have a Mail / Sip server how have direct its own public fix IP address. Port 1 on th...

Now I make a new test with a minimum of configure. After hard reset I only change the MAC of Port 2. [admin@MikroTik] > /interface ethernet [admin@MikroTik] /interface ethernet> set 1 mac-address=00:50:7F:C9:XX:XX Activate DHCP Clint /ip dhcp-client add interface=ether2 disabled=no And configure the...

Hi, I have the routerboard 433GL. I used routerOS v5.9 then I upgraded it to v5.14. Test Speed with both OS versions was slow: 30-35 mbps download and 6 mbps upload. 6 mbps upload is ok but 30-35 is not in order. Normally it is 60 mbps. First I thought that my ISP has some troubles in its services, ...