MikroTik

fivenetwork

It isnt the OS. Must check with the proxy. We use a netcache appliance. Ta m8s.

fivenetwork

Longtime no post. We have users downloading 4GB plus sized files. Our entire backend is made up of MT boxes. Problem is the download stops with the filesize reported as 0 and the status as completed! Before we complain to our upstream providers we need to know that this is not an MT issue. File down...

fivenetwork

I had the exact same issue with 2.9.38 and pppoe clients. I had to remove queue tree and everything worked great. Customers still have their queue set by radius. MSS and MTU were all set. I went through everything on the router. After hours of testing it all came down the queuing. We use queuing fo...

fivenetwork

the first thing is that if the problem is just with POP? have you tried browsing or other downloads on the system where client is installed. No problems as of now with anything else on the client. if the problem is with all stuff, then obviously its an MTU or MSS problem.. otherwise u'll have to ch...

fivenetwork

We intend to use MT in a big way as a firewall/QoS/Access Control solution for our clients. Problem is that the PPPoE client in Mikrotik behaves strangely. The setup is as detailed. MailClient has a Valid IP and is routed through MT BOX-A. MT BOX-A gets connected to MT BOX-B as a PPPoE client using ...

fivenetwork

1. Add an outgoing filter chain to your pppoe user profile. 2. Add a Filter Rule to the that chain to add the address to an Address List 3. Now you can add a NAT redirect rule that applies to the Address List. Can you be more specific? Like ... Can you list the actual command syntax?? Ole' Argentin...

fivenetwork

For now you can login inside that online demo and look what features you like and maybe you have some suggestions. 1.> A page where the USERS (Clients) can login to check their Account Statistics like Time, Data and Day balance if any. Also their Bandwidth Limits. 2.> A Page where the client can ba...

fivenetwork

Have always preferred the Intel 865GB series as they have onboard video and six (Count them 6!) PCI slots.

fivenetwork

Conch

What you did is fine for Wireless Reg Users. How do I go about doing this for a simple Ethernet PPPoE server whereby I just wanna know how many Users are online....

fivenetwork

I too wanted to do this. I am stuck at the following step. Using Getif and the second last option MBrowser I obtained this entry ' enterprises.9.9.150.1.1.1.0 ' and on selecting this entry (amongst the many such obtained) i got this OID as the associated one .1.3.6.1.4.1.9.9.150.1.1.1.0 I added this...

fivenetwork

I too wanted to do this. I am stuck at the following step. Using Getif and the second last option MBrowser I obtained this entry ' enterprises.9.9.150.1.1.1.0 ' and on selecting this entry (amongst the many such obtained) i got this OID as the associated one .1.3.6.1.4.1.9.9.150.1.1.1.0 I added this...

fivenetwork

Supposing we do the script route....

The next query that pops into my 'devil's workshop' is how do we trigger it on EACH reboot? Is there a way of determining that the SYSTEM has rebooted and then have the script run, like a AUTOEXEC.BAT ??

fivenetwork

Cant be done. As your PPPoE interface created for a client is in ITSELF regulated by the profile limits. As the interface itself is say 64/64 no way can you increase bandwidth to particluar sites. one way out will be to invert the limits. ie Have a profile limit of say 1024/1024 and then have trafic...

fivenetwork

My 2 Bits .... Attack this issue from all sides so that we have a acceptable situation until a better solution comes on ... :D 1: Limit number of connections .. Has the pleasant effect of auto-governing p2p. But the optimal limit will have to found that works for each bandwidth plan subscribed to. S...

fivenetwork

Heeeyyyy! The script workaround IS a hack job. If the strain on the cpu isnt much then you could have it executed every 5 minutes or even a minute.

fivenetwork

Not sure what your setup really is but here's an idea: Make IP lists in MT with the addresses traffic would not be counted to. Add Mangle rules to mark that traffic or mark and count not that traffic. (put a ! in there). Use your imagination.. Ummm With you till the mangle and marking bit. But you ...

fivenetwork

Jager

Ditto here!! No way am I gonna enter all those users manually!!

And what happens when we delete an PPPoE interface manually to force a disconnection? Does this static entry get deleted? How does authentication happen?

So many questions ....

fivenetwork

Well, you could workaround this ....

write a script to MOVE the static rule to top of the table. and schedule it to be run every hour.

this is a patch but will keep things working till MT comes up with a proper fix.

fivenetwork

Hi all Our setup is a CLEARBOX radius server and hack-job ASP scripts for a front end. All clients connect via PPPoE. Is there a way to distinguish traffic between clients on same router and their traffic with the WAN when the data is collected through RADIUS attributes at time of log-out?? Previous...

fivenetwork

Can be done using Scripts and Scheduler. First default queue /queue simple add name=test dst-address=192.168.11.2/32 limit-at=32000/32000 max-limit=64000/64000 Next Scripts /system script add name="Day" source=/queue simple set [/queue simple find name=test] dst-address=192.168.11.2/32 lim...

fivenetwork

Hi all Is there any way to RETAIN the graphs created under Tool/Graphing?? I mean if User-A has logged in by PPPoE from 2 PM to 3PM a graph is auto generated. But when the same UserA logs in again at say 7PM the graph that is created overwrites the old graph. It would be great if the graph were a co...

fivenetwork

Do what we do. Determine the routes to most popular IP series on each ISP. Then policy route them as per the fastest link. Not the neatest method but this works. If you are going to continually assess latencies and then decide on the route, your MT and you will soon be in a loony bin.

fivenetwork

Works beautifully! Checked this out over 2 weelends to be doubly sure.

fivenetwork

/ip accounting snapshot take

issue this command a coupla times and also set the log downloading to happen every minute if the number of sessions flowing through your MT is pretty high.

fivenetwork

How do I make use of the Interim-Update feature? We are planning on collecting the accounting data every minute from the PPPoE sessions and not on termination of the connection as is done on default. Will enabling the Interim-Update function on the PPP Profile do the trick or is there any further tw...

fivenetwork

Thanks a lot. Shall give it a whirl and report back.

fivenetwork

I want to execute a script only on weekdays and not on weekends. How do i do this?

fivenetwork

Yeps we do that. But still are unable to figure out how the heck does this mysterious traffic pass through our routers

fivenetwork

Now this is real interesting.

I recreated , not copied, the exact script but with a different name and that works!

fivenetwork

Hmmm ... This seems to be a bit similar to the way STEAM server responds. We beleive that the packets being sent contain the private IP but the listening server sees it as coming from your external IPs and as the two dont match it does not allow the connection to be established. This is what is happ...

fivenetwork

Connlimit is in RouterOS - see connection-limit firewall parameter

I see it in the manual but how do I set it thru WinBox or thru Telnet?

And if it is a pool like say 192.168.1.0/24 will it for EACH ip in the pool or the entire pool as a whole?

fivenetwork

You mean you didnt do ingress filtering before???!! Any network admin with just a little respect for himself does this. Sounds like your average DoS/DDoS Zombie, BTW. _// Sten Daniel Sørsdal INGRESS Filtering ?? Please elaborate ... Mebbe we are talking same functions but different terminlogy or we...

fivenetwork

We are facing a rather funny problem. We see packets on our routers wherein both the source and destination IPs are not on our network! After tracking down the culprit machine we find a file "syshost.exe" to be the reason behind this. Once this particular file is disabled the activity on o...

fivenetwork

4661?? Sounds like EDonkey. :D

We have noticed that EDonkey performance drops like hell when using private IP's. Are your clients on private IPs or on Public IPs?? If on Public IPs there should be no problem.

This could be a bug in EDonkey wherein it limits the number of clients from a single IP.

fivenetwork

2. Use PCQ on your clients, not the PPPoE limits - you will have to use tree queues, consult the manual on how to do this. AFAIK, then you will be able to change limits on the fly.

PCQ ?????

fivenetwork

script is created under /sys script and it has ALL policys enabled.

fivenetwork

Actually, I think there is one chance to do this - remember that tree queues are applied before simple queues, and that simple queues are put in both global-in (for source=target-address and destination=dst-address) and global-out (for source=dst-address and destination=target-address). Umm, Does t...

fivenetwork

Nopes. Done that too. admin is the one set to execute those scripts.

fivenetwork

We increase the BW to our clients at night. To do so we have scripts that disable the ether interface on which PPPoE server is running at a set time and enable it again a minute later. In this minute interval another scheduled script is run which changes profile limits. This procedure is repeated at...

fivenetwork

Yeah. thats the first thing we thought of.

All scripts are ALWAYS created by the user 'admin'. admin has full rights.

Now what?

fivenetwork

Interesting. Umm, 1. Create your firewall rules or whatever first. 2. Write scripts for enabling/disabling the rules. 3. Use /tool netwatch to run the relevant script as per the status We do it here all the time for monitoring the status of the parent proxy. If parent proxy goes down then a script i...

fivenetwork

Nopes. I dont think so. As a Virtual Interface with the prescribed BW limits is created for each SECRET as per the profile selected. To do that you might try to set no limits in the profile and then queue them for access to the internet. This u will have to do for each user. Unless there is a workar...

fivenetwork

Ummm,

You could masquerade all users on the MT and have a DST NAT redirect Port 80 to the SQUID on MT. Have MT SQUID size set to zero and parent proxy it to the EXTERNAL SQUID.

Then External SQUID will easily communicate to the MT SQUID, we thinks.

Will do?

fivenetwork

Can this script work with PPPoE?? Like the OS provides a Traffic limit for HotSpot Users can this be adapted in similar fashion for PPPoE users??

fivenetwork

We use a very basic script to backup our configs. /export file=test;/tool e-mail send file=test to=abc@xyz.com subject=TestBackup; We have about 30 odd Mikrotik depoyed in various locations for various purposes. The above script works in almost all locations but on some routers it fails with the err...

Search found 45 matches

Re: Max Filesize That can be handled by MT

Max Filesize That can be handled by MT

Problems with MT PPPoE Client

Differentiate Traffic Accounting

Retain Graphs under Tools/Graphing

RADIUS Interim-Update and External RADIUS Servers.

Execute Script only on weekdays and not on weekends

Re: Mysterious Packets and unbeleivable traffic

Mysterious Packets and unbeleivable traffic

Changing Limits

How Do we get this to work with PPPoE?

Weird Problem