How this address is assigned to interface 'ether1-gateway'? It's dynamic.
I've no idea- its only the default config

You are connected to ISP via 'ether1-gateway'?
Yes over the ether1-gateway

Thats the only solution? I have an alix board with pfsense. Under pfsense there is no problem to forward ports so it must work with mikrotik too?

Here is the traceroute: [admin@MikroTik] > /tool traceroute google.com # ADDRESS RT1 RT2 RT3 STATUS 1 192.168.0.1 1ms 1ms 1ms 2 195.14.226.59 18ms 8ms 14ms 3 81.173.197.77 7ms 6ms 6ms 4 78.35.33.225 7ms 6ms 7ms 5 87.79.16.235 11ms 11ms 11ms 6 78.35.18.6 11ms 11ms 11ms 7 209.85.248.112 151ms 61ms 11m...

Yes the name ISP is the name of my PPPoE client. Thats absolutely impossible that my ISP IP is a private address. My actual WAN IP begins with 87.79 8 I can see this on yougetsignal.com and otehr sides).

I wondered too why they are only private ip addresses displayed. Actually I've an IP Address the begnis with 87.79... so thats a public ip address. When I enter now the command /ip address print than I see the same output as I posted earlyer.

I've added now in the NAT rules by Dst. Address the public IP from my ISP but still the same problem. Furthermore I've no static public ip. My ISP gives dynamically IP addresses that change every 24 hours. So what I need to do now? Here is the ip address export: [admin@MikroTik] > /ip address export...

Here is the ip address print: [admin@MikroTik] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 ;;; default configuration 192.168.88.1/24 192.168.88.0 ether2-master-local 1 D 192.168.0.103/24 192.168.0.0 ether1-gateway 2 D 10.64.64.102/32 10.112.112.150...

I have a 100 mbit wan connection. When I use pppoe over Windows dial than I got the full 100 mbit. With the routerboard RB450G I got only 48 mbit WAN routing throughput with the default factory configuration with os 5.15. Whats wrong? The CPU load peak is after a 10 minutes test only by 35 % and the...

I've tried by dst-nat rule in-interface pppoe now but it still doesn't work

I can see that there are incoming connection requests (tcp flags) but they all time out and then they will discard.

No the dst-nat rule packet counter doesn't increase.

@ ditonet

I've 2 PC's in the inside lan (1x client and 1x server) and I can reach my server from my desktop PC in the inside lan without problems. Only from external it's not possible. There is no port open it's like Fort Knox

@rjickity

Could you give me an example please? I don't know exactly what you mean.

Here is the firewall export: [admin@MikroTik] > ip firewall export # jan/01/2002 01:28:11 by RouterOS 5.15 # software id = XXX # /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-w...

Hello all, I would like to open a port so that user from the outside (Internet) can connect to my inside Server with the local IP 192.168.88.3 I've read the official manual and I tried different tips from previous posts in the forum but nothing worked. I use the RouterBOARD RB450G with the factory d...