MikroTik

marko1303

After trying to start services, router reboots.

Is it hardware or software problem?

marko1303

4.PNG

5.PNG

Have anyone an idea?

marko1303

I have problem with RB411UAHR booting

1.PNG

2.PNG

3.PNG

4.PNG

5.PNG

marko1303

Has anyone an idea?

marko1303

I have 3 VLANs in my network. Problem is slow establishing connection between VLANs. For example, when users from VLAN 200 try to run some exe file from server in VLAN100, running takes to much time (about 40 sec.). Users from VLAN 100 wher is server, same exe runs at about 10 sec. What is the probl...

marko1303

marko1303

ether5 and VLAN200 from bridgeether5+VLAN200, VLAN100 and WLAN from bridge LAN+WLAN.

marko1303

I bridged phisical interface with VLAN interface on my RB493G and everything works fine, bat after router reboot bridge port disappear. What can be a problem? # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON 0 vlan100 LAN+WLAN 0x80 10 none 1 wlan1 LAN+WLAN 0x80 10 none 2 vlan200 ether5+VLAN200 0x80 10 ...

marko1303

It's work now for http, but not for https. If i try to open http://www.google.com router redirect me to http://192.168.1.75, but if itry to open https ://www.google.com browser returns error. [admin@MikroTik] > ip fir nat ex # mar/19/2014 14:24:53 by RouterOS 6.10 # software id = F6R9-UR4F # /ip fir...

marko1303

It is not working, here is my config. [admin@MikroTik] > ip proxy expo # mar/19/2014 07:46:18 by RouterOS [code]6.10 # software id = F6R9-UR4F # /ip proxy set enabled=yes port=3128 /ip proxy access add action=deny dst-port=80 redirect-to=192.168.1.75 src-address=\ 192.168.1.0/24 [/code] [admin@Mikro...

marko1303

What I need to set in proxy?

marko1303

http://www.imageupload.co.uk/images/2014/03/18/IMG20140318142556.th.jpg I need redirect all traffic from WiFi to WEB server. What is the best way to do that? User IP range is from 192.168.3.100-192.168.3.150. If some user try to open e.g. http://www.google.hr it must be redirected to http://192.168...

marko1303

I bridged ether ports 2-9 on RB493G, bridge ip is 192.168.40.1/23. Ether 2 is connected to AP1 (RB912UAG-2HPnD) with bridged ether 1 and wlan1, bridge ip is 192.168.40.2/23. Ether 5 is connected to AP2 (RB912UAG-2HPnD) with bridged ether 1 and wlan1, bridge ip is 192.168.43.2/23. Problem is when I t...

marko1303

Do you need some other informafion, or have some other solution?

marko1303

Hy...
Shematic of my network is in attachment. I used configuration from (model 1) http://wiki.mikrotik.com/wiki/Wireless_WDS_Mesh.
Which routes I need to add in routers? Users must have internet connection.

marko1303

After upgrading from version 6.0 to 6.1 both routers are bricked. After that i bought SXT 5HPnD and everything is OK. Bandwidth is 97Mbps because on this routers is 100Mbps LAN.

marko1303

Does anyone have an idea?

marko1303

marko1303

marko1303

Distance is 60m.

marko1303

marko1303

This is better.

marko1303

Bandwidth between 2 SXT G-2HnD routers is about 20Mbps. Distance is about 100m. What could be the problem? side A: name="wlan1-gateway" mtu=1500 mac-address=D4:CA:6D:6F:B0:DD arp=enabled interface-type=Atheros AR92xx mode=bridge ssid="a" frequency=2422 band=2ghz-onlyn channel-wid...

marko1303

Thanks. It is working well.

marko1303

Is it possible on MikroTik OS to set up 3G (over USB) connection as an automatic backup if internet connection via PPPoE connection breaks.

marko1303

I don't have a static IP address. On booth sides is script which resolves DDNS: name="Resolve DDNS" owner="admin" policy=ftp,reboot,read,write,policy,test,winbox,password,sniff, sensitive,api last-started=dec/06/2012 20:53:02 run-count=10 source= :global newr1 [:resolve xxx.dyndn...

marko1303

Can you give me an example?

marko1303

I configured Ipsec tunnel between 2 routerboards. 2 PCs on side A are communicating with server on side B trough tunnel, on booth sides is DSL with 512kbps upload. How can I reserve (on side A) about 500kbps of upload for IP sec traffic?

marko1303

Is TL-WN851ND supported by mikrotik 5.18?

marko1303

It works, but I haven't static IP addresses.
Thank you.

marko1303

http://img163.imageshack.us/img163/8032/networkshema.png Shot at 2012-09-02 This is my network and I need to do IPsec tunnel between side1 an side 2. Users from side 2 (192.168.2.0/24) must communicate with server (172.16.1.10) on side 2 or with subnet 172.16.1.0/24. How can I configure IP sec tune...

marko1303

Do u mean: [admin@MikroTik] /interface pppoe-client> print Flags: X - disabled, R - running 0 R ;;; Leitung 1 name="pppoe1" max-mtu=1492 max-mru=1492 mrru=disabled interface=ether1 user="****" password="****" profile=default service-name="" ac-name="&quo...

marko1303

Bene007 what is your configuration of PPPoE connection?

Search found 33 matches

Re: RB 411UAHR

Re: RB 411UAHR

RB 411UAHR

Re: RB493G + CRS125-24G-1S-2HnD

RB493G + CRS125-24G-1S-2HnD

Re: Bridgeing VLAN and phisical port

Re: Bridgeing VLAN and phisical port

Bridgeing VLAN and phisical port

Re: How to forward all WiFi traffic to WEB server?

Re: How to forward all WiFi traffic to WEB server?

Re: How to forward all WiFi traffic to WEB server?

How to forward all WiFi traffic to WEB server?

RB 493G problem with bridged interfaces

Re: Dynamic mesh routing

Dynamic mesh routing

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

Re: ptp 2 SXT G-2HnD low bandwidth

ptp 2 SXT G-2HnD low bandwidth

Re: DSL over PPPoE + backup 3G

DSL over PPPoE + backup 3G

Re: IPsec tunnel configuration

Re: IPsec tunnel bandwidth reserve

IPsec tunnel bandwidth reserve

Re: TPLINK WN851ND

Re: IPsec tunnel configuration

IPsec tunnel configuration

Re: 1 server 2 DSL lines

Re: 1 server 2 DSL lines