Yesterday i checked the connection speed between my laptop and rb4011. It was between 1.1gbps - 1.7gbps. Laptop wireless card intel ax200 Ap 5GHZ Channel 5280/20-eeeeeCee/ac/DP(15dBm) @smuslim with all due respect, I do not believe you passed data over wifi at 1.1gbps. Perhaps you're just sharing t...

+1 I'd also like to know. Is there an event that can be logged (in RoS 6.33+) or is this a future feature?
Thanks

Upgraded today on RB750UP, previous firmware was 5.24, suddenly I have port flapping, but only if I try to connect with winbox, if I use ssh everything is ok. I have some devices powered on ports, try to change poe status to forced-on and auto but nothing change. I upgraded also rb firmware, but st...

Here's my latest status (prior posts elaborate my experiences with the 750UP over the past year). Using the capacitor described by coxwireless on pages 3 and 5, I eliminated the problem of powering the 750UP at the end of a long poe run and then powering devices another 30' from the unit. I have 3 o...

I have discovered that using Chrome for iOS 6 works with webfig.

Same here. RouterOS version 5.21 and on 6.0rc6 iOS 6.0.2 Tried several mobile browsers and get the same result. Works fine the first time. Then I logout and into a different router. Logout and try the first router - now I just get ERROR internal server error from Webfig. Based on the variety of brow...

I've got a 35v 220uf capacitor running now (not the 35v 2200uf anymore) and I can power 4 UBNT devices reliably. I'm going to put this in the field tomorrow for real world testing.... Hi ... Any updates on that? Regards; I have one running with the 35v 220uf capacitor. System-Health reports a const...

This isn't working as I had expected. Created bridge 1 Added ether-1-gateway (IP 10.0.0.2) and ether-5 to bridge. ether-1 wired to 10.0.0.0/24 network with 10.0.0.1 as upstream internet gateway. ether-5 wired to host with IP 10.0.0.5 bridge-1 assigned the IP 10.0.0.4 [ ports ether2-4 switched with e...

Mu understanding is that using the RB750 as a router, the LAN is either switched together on 2-5 or individually routed (through the WAN) on ports 2-5. Can I group 3 of the ports as a switched-LAN (set one of them as 'master' port) routed through the WAN interface, and 1 port to also be on the WAN s...

CoxWireless you say you could have used a smaller capacitor. What size? That level of electrical is over my head, but I was hoping to solder a cap on my 750UP. Is 24V 1200uf reasonable or what would you recommend?

Bump.

CoxWireless you say you could have used a smaller capacitor. What size? That level of electrical is over my head, but I was hoping to solder a cap on my 750UP. Is 24V 1200uf reasonable or what would you recommend?

Yes. I was responding to their 5.18 update which supposedly had a magical poe fix.
No magic here...

My desired setup (and how I'm testing) is with the Mikrotik-provided power supply (24V @2.5amp) feeding through a passive poe injector (y-cord) through 120' of cat5e cable. The 750UP is fed on the DC plug from that 120' cable. Then I have a 1 or 2 Nanostations on a 30' cat5e cable connected to one o...

The POE-out problems are still there in 5.18. My System Health shows a constant 20.4V on the Mikrotik, but the 2 slave devices with poe-out=forced-on continue to lose power. Mikrotik: you really need to publish some specs about the supported uses of poe-out on the RB750up and the limitations. You ha...

I just set this up on 5.15 and it seems to be working.
[Edited - seems to be working fine].

What about the fix for poe power issues in the 750UP ?

@janisbvp - would you post a picture of your capacitor and or cap + diode solution?
Would be nice to see how you wired it in terms of the power lead and or ethernet cable.