MikroTik

ahooper

Still having issues with this device, It gets recognized on the device list but will not set up a USB interface.
Has anyone had any luck getting these to work?

ahooper

Well a quick and nasty fix.. It appears that the reason this happens is that when you have a hotspot in the new version the radius seems to not work for 172.0.0.1 but will work for the IP of the hotspot but if you do this the firewall MASQ will fire the request out the gateway. Fix for me was to add...

ahooper

Correction, I have managed to get a response from NTRadPing Test Util so the radius is working just not for requests sent via the localhost.

ahooper

I am having the same issue. Has anyone found a resolve this this yet? It appears that the usermanager radius is not working at all, I am seeing the hand off in the status but they just time out then get the message radius server not responding. I also tried to us NTRadPing and reconfigured UserManag...

ahooper

Thank you for the pointer. One other question however. By the looks of things these models use a device with two wireless cards in them. We are looking at using the Omnitik. From what I see there we set all the units to AP Bridge mode with WDS Dynamic Mesh and included to the mesh device/interface ?...

ahooper

I am wondering why there seems to me little information in regards to the mesh functionality. We have been building a network that runs down a main street and each radio can see two others making it ideal for a mesh solution however at present we have them running as AP Client as there seems to be l...

ahooper

This one is not over a huge distance. just connected to one of the radios and getting about -71 and from memory the distance is about 1 to 1.2Km. So far I have not done any tweaking, they have just been installed and configured to connect to each other. We are using the omnitik as both client and AP...

ahooper

Thanks. I had a feeling that it may have been something like that. its not easy finding a place that you can set a test up in and you can really only turn the power down so much. Normally I could shove a set of attenuation in line but its a bit hard to do with fixed antennas. That gives me an idea :...

ahooper

The test environment spans some 5 or so meters and there was negligible interference in the area. the Omnitik has an integrated antenna so there should be no issues there with cable loss or other problems. signal levels ranges between -37 to -43 after turning the power down a little. When the link a...

ahooper

I was only stating what was reported by the test utilities provided in the device and not by an external device. UDP is critical to the base network's functionality and to be honest we should not be seeing such losses in an optimal test environment. maybe I am spoiled with having used high grade DMR...

ahooper

SN: 2BBF01108D8B/121 And I did config the signal level LED's but they don't seem to work or seem to ignore the signal levels. I will test it a little more in the field and its not overly critical but would be nice to have this feature. Other than that they are a nice little unit, clean and simple. L...

ahooper

Im using these as AP's and Client devices. there is what appears to be the option to set the LED's as a signal meter in the LED settings but this just seems to turn them on. The packet loss was what was given in the details under the bandwidth test option. the units were being tested in the workshop...

ahooper

We have lust purchased a bunch of OmniTIK radios to test out and there seems to be a few issues. 1. I can not get any of the units to fire up the signal strength LED's 2. One of the units has a screw lodged in behind the signal strength LED and the window. this is a manufacturing quality control iss...

ahooper

I have been using the following script for checking the remote clients IP, if their IP changes I get a copy of the new IP sent to me via email. However I have upgraded to MT 5.2 and this script no longer works. Any ideas as to why? I have tried also a couple of other scripts and none of them seem to...

ahooper

Thanks, Yes i have used this however its no good for testing antennas. its fine for doing some testing like wathing the RF lobes however one thing i have seen is that the bandwith tests are not exactl stable in a noisey enviroment.

ahooper

Is there any way to orce the wireless devices to go into a test mode and do a continuious transmit on a specific frequencey or even just send builk data out the wireless interface. The reason i would like to do this is two fold. 1. Test the true cignal levels between two links on a loaded network sh...

ahooper

You can use Yagis as an AP antenna but all your clients have to be within the 53deg beamwidth of the yagi. But in my view 53Degrees is HUGE as im use to working with real point to point antenas that only have 18degree down to about 4degree of beamwidth. What you also have to take into account is tha...

ahooper

jordantrx, Dont forget that your feed lines from the Yagi's to the splitter have to be exactly the same length. The main feed to the splitter acn be prety much anyting (within reason) but the Splitter to Antenna on both sites needs to be exactly the same as do the antennas or you will end up with a ...

ahooper

jordantrx, As you see it appears we are having similar issues however i have managed to track down the cell opperator who is pushing some 30+ watts into his antenna that is facing my yagi and noly about 120meters away. I am lucky that they seem to be wiling to work with me to resolve this issue and ...

ahooper

Thanks, It appears we have a cellphone carrier opposite where we are about 250m pointing in our direction. On a frequencey scan we are seeing the following channels and noise levels 2452 -64 2457 -33 2462 -33 What is interesting is that if i change the AP and Client from 5Mhz wide to 10Mhz wide thin...

ahooper

I am in he process of setting up a couple of RB411's as a point to point link for a client, range is about 3Km and is reasonable LOS. In NZ we can only use 2442=922@5Mhz wide however i am finding soem very stange issues with the XR9 settings. If i set the AP end to 2442 the remote/SU end will not co...

ahooper

Ok, I was playing around today and got a little side tracked. I am setting up a Point to Point link for a client using a couple of RB/411A's and decided to make life easier with a simple alignment script but as i started throwing something together and made the LED's blink i then added some sound bu...

ahooper

Name: hs-pool
Address: 192.168.0.128-192.168.0.254
Next Pool: none

ahooper

Chupaka: Yes they should be as i can see no other way for these IP's to be handed out and they are not static. There are a couple of HA tags in the /ip hotspot host print however these are not for this customer.

There is only a P flag for him.

Regards
Andrew

ahooper

Thanks, I will try this however this does not explain why such a thing happens as that address is not part of the pool and is excluded/denied in the hotspot bindings table.

Regards
Andrew

ahooper

There seems to be a problem with Hotspot and would like to put together a script that will resolve this automaticly until i can find out what is causing the issue. Essentially a hotspot client is being given the same IP as our core router, this is not being handed out by the DHP server and its not s...

ahooper

I have a couple of instances where it appears that several hotspot clients are being assigned the same IP address as the gateway as well as a normal IP. the result is that the client can not connect until i delete the hosts entry under the hotspot winbox management. MTRouter/Hotspot Address: # ADDRE...

ahooper

I have upgraded to the new beta version and still have no labels, has any one got any other ideas as to what could be causing this and how the issue could be fixed?

ahooper

We had a minor outage on one of our links, dude did what it should and fired off a warning an urned it toolbar icon red. however not the problem has been resolved and the device has turned green but for some reason the flag remains red and if you drill down to a sub map the main map says there is st...

ahooper

I suspect it will not be long before we see a similar problem emerge in XP as i have read a few articles of late and found that there have been many applications with font issues and as a result from what i understand the font issues were causing soem really strange problems. 2k3 being a much more s...

ahooper

No that did not work either.
I tried to change the Font, Type, Colour, Size and even tried, Normal, Bold etc... Still not lables or text.

Regards
Andrew

ahooper

I tried changing the fonts, also uninstalled and installed the non beta version and had the same problem, then reinstalled the beta version but it made no diference at all.

I will try again, and maybe transfer a fint from an XP machine over and see if that works.

ahooper

I have a Windows 2003 server and have installed Dude V1.1 however when any devices/networks or other items are added they are all missing their label, i have tried to manually set the label and change the font but all i get is an icon in a square green box with no label. I have also tried the beta v...

ahooper

Is it possible to interogate the Oid's based on a specific result? Our clients authenticate using radius and open a PPPoE connection with a dynamic IP. Is there a way to pick up their user name then fiter the results so that you can pick up their usageand other information from MT? I know you can bu...

ahooper

I have PPPoE clients being served real IP's from the MT box. At the moment I am scanning the network using PING and when the users come online I see their IP address and a green box however when they dissconnect anr reconnect under a new IP the box turns red and a new box is created. I would like to...

ahooper

Any idea what version they are running? I have shut squid down on the box and cant look it up again. Im not sure if its possible but if they are using 3 instead of using their interface to config squid could a script not be written to set up the reletive variables? That is unless there is a way to h...

ahooper

If MT uses squid 3 then this option looks like it will do the job. TAG NAME tcp_outgoing_address Description Allows you to map requests to different outgoing IP addresses based on the username or source address of the user making the request Build Option Default Usage tcp_outgoing_address ipaddr [[!...

ahooper

It would be cool if there was a way to open up a number of seperate proxy seervers based on the outgoing interface/gateway. We have one MT box that serves a couple of PPPoE realms and based on the realm spits the connection out the various gateways. Problem is that if we try and use a proxy it captu...

ahooper

Thanks, The more i looked at it the worse it got and i may just build a bridge box with vlan support and transparent proxy so as to resolve the issue however.... MT. For xmas could you please add the ability to add seperate proxy servers for each pppoe realm :) that would fix the problem and should ...

ahooper

I have a router OS box setup with a hard drive for proxy data, i have 2 PPPoE realms for incomming connections. the idea was to have one wth high priority and real IP addresses and the other would be lower priority with nated ip's. On the gateway side i have a vlan switch with vlan2 being feed via a...

Search found 40 matches

ZTE MF636 Still not working

Re: radius server not responding

Re: radius server not responding

Re: radius server not responding

Re: WDS Bridge or MESH information and examples

WDS Bridge or MESH information and examples

Re: OmniTIK Problems

Re: OmniTIK Problems

Re: OmniTIK Problems

Re: OmniTIK Problems

Re: OmniTIK Problems

Re: OmniTIK Problems

OmniTIK Problems

5.2 and ChangeIP Script

Re: RF Testing Utility

RF Testing Utility

Re: 900Mhz Ubiquiti XR9 Settings Scenario Questions

Re: 900Mhz Ubiquiti XR9 Settings Scenario Questions

Re: 900Mhz Ubiquiti XR9 Settings Scenario Questions

Re: 900Mhz Ubiquiti XR9 Settings Scenario Questions

Re: 900Mhz Ubiquiti XR9 Settings Scenario Questions

Music to my ears

Re: hotspot host script

Re: Hotspot client being assigned gateways IP by DHCP

Re: Hotspot client being assigned gateways IP by DHCP

hotspot host script

Hotspot client being assigned gateways IP by DHCP

No Labels

All outages resolved but main map and flag still red

Devices missing labels

SNMP interogate based on Oid result

SNMP / PPPoE Dynamic Map with username and IP

Wish List PPPoE + VLAN

PPPoE, VLAN and Proxy