Hi there:
It would be great if up-time local variable is avaible when "on down" script in executed.

Thanks!

Is there any list of Mikrotik devices with beeper? Like hEX/RB750Gr3.
It can't be used in filtered view of product.

Thank you.

Hi everyone: I'm using a RB client in a Cisco's wireless network. Client is on the move, and spend too must time waiting before jump to new AP. I can't change any setting of WiFi: channels, encryption, etc. Is there any value I can adjust to force RB to connect to a new AP if signal is under certain...

Thanks Normis.
I thought that attendance at MUMs increases certifications expiration.
I want to attend to MTCIPv6E course and get certified but my MTCNA and MTCRE expired in 2016.

Do I need to repeat again MTCNA course and examen?
Thank you.

Is MUM attendance enough to maintain certifications?
Can anyone clarify this please?

Thanks.

Thx,

But if I have more than 2 vlans, do I have to isolate them in such way? There will be a lot of rules, each network isolate from others.

I fixed it with one rule per vLan:

chain=forward action=drop in-interface=vLan7 dst=192.168.7.0/16

Internet access still works.

More generally, routeros will route any network to any network unless you have a drop rule in the forwarding chain! If you have no rules in the forwarding chain and the router has internet access on a port then you should add some! That's right, perfectly explained what I tried to say with "Yo...

By default my Mikrotik didn´t allow me to access devices from other vLans.

I was thinking and testing why my Mirkotik wasn´t routing data between vLans and I finally found the problem... Printer´s network mask was badly typed when the device was configured...

Thanks!

SOLVED: Mikrotik allows communication between vLans by default.
You have to "isolate" vLans if you want to secure them.

The problem was printer´s netmask (manually typed in the device...)

Hi there: I have same problem, can´t ping from mis devides in vLan30 to a pirnter in vLan20. I use its IP: "ping /t 10.0.20.2" from a PC in vLan30 with 10.0.30.XXX IP. By default my Mikrotik didn´t allow me to access devices from other vLans. I tried with with NAT and FILTER rules but I ca...

Hi everyone:

I´m triyng to access to a printer witch IP is 10.0.20.2/22 and vLan ID 20 from computers in 10.0.30.0/23 and vLan ID 30.
Can anyone help me to setup that please?

Thank you.