zdraste zdraste Oleg

http://www.ubnt.com/edgemax#EdgeMAXhardware
http://dl.ubnt.com/Tolly212128UbiquitiE ... kroTik.pdf

what will you say?

Fixed network diagram

77.77.77.250 is the personal address of the router in the world, established on the first interface


http://files.mail.ru/2RS6NX
router settings

try locally, from cmd prompt: telnet 192.168.30.11 5001 and see is it working

I can use telnet for local connection to address 192.168.30.11 5001

Hi, if you are using this port forward from outside to inside you can put incoming interface so that rule can be more specific... Put rule at the top and see the counter? does packets are passing through that rule? if does, does the local device know how to return traffic back? What exactly can be ...

Hello Need to do port forwarding to mikrotik, telnet to connect to the router via an external ip to a device on the LAN. External ip-router (any number): 77.77.77.250 Internal ip-router: 192.168.30.118/24 Internal ip device: 192.168.30.11/24 Port to connect to the device via telnet: 5001 Rules Nat: ...

Your question is unclear. What do you want to do?

must bind ip from dhcp server to mac address interface of switch. this is used in routers dhcp option 82
http://www.cisco.com/en/US/docs/ios/12_ ... cpopt.html
I have not seen so had the opportunity to mikrotik

when mikrotika option will be available for 82 dhcp?

is it possible to install mikrotike database server, such as mySQL server? or other types of databases

This means when the next customer to send data, power transmitter adjusts to each customer?

While the focus will be on the worst connection?that is, if we have multiple attached devices that connect at speeds of 54Mbps, from your above transmitter will operate with power 500mW 27dBm/and if you see a device that connect to an access point and it will have a connection with the speed, power ...

i.e. in 751, where there is a 1-Watt transmission, by default, will run a one watt?in practice, I don't watch. I'm switching the ADvanced mode, traveling and seeing the 30dBm other hardware that dot the radiation work more than it was by default.

I suspected that the default is 50 milivatt/17 dBm.

works as a Wi-Fi when the value of the transmitter power is set by default? the handbook says that: default means that the card will use the tx-power values ​​from the cards eeprom and will ignore the setting what is specified by the user in the tx-power field. but how do I know what value is in epp...

found on the documentation

I work in a company which is a distributor of Mikrotik equipment. How can I get all the possible documentation of all the possible malfunction of equipment Mikrotik? I got the 450G, in his first port of high-RESISTANCE: 440kOm between orange and green and white wire. wanted to know what you can do t...

Is there any documentation on what could be a fault in the equipment, how to define and how to fix them? what I found: http://download.routerboard.pl/Eth.port_testing.pdf http://download.routerboard.pl/RB450G.pdf http://download.routerboard.pl/RB450.pdf Just interisuet what resistance should be tran...

HelloHow to make so that the hotspote was only button to log on to the Internet. without logauta and password?and that should be set up that would give Internet hotspot at 2:0, and then for an hour blocked user who has gone?

thank