MikroTik

xtrgeo

Hi all. 2 mikrotik routers, connected to each other, lets say R1 --- R2 R1(eth1): 192.168.80.1/30 -- R2:(eth1): 192.168.80/30, no nat at all R1 on lan side(eth2): 192.168.85.1/24, several ip phones in 192.168.85.0/24 R2 on lan side(eth2): 10.65.65.1/24, freepbx on 10.65.65.2/24 SIP ALG on both route...

xtrgeo

Hello, I think first post and referred new documentation https://help.mikrotik.com/docs/pages/viewpage.action?pageId=26476608 needs to be updated. Since, RouterOS 7 is strict about target-scope (at least put it on 11) , which also works for RouterOS 6 and RouterOS 7 Also, 1) Can somebody confirm th...

xtrgeo

But the "gateway" "host" is shown as unreachable. Any ideas why? Yeah, all your routes are not working :( It's because of RouterOS limitation: recursive routes cannot be resolved via interface routes (i.e. gateway=pppoe-out1 is bad route). As a workaround, you make a copy of you...

xtrgeo

Recursive routing from ros 6 to ros7. I've made some changes in scope and target scope for this to work. It is working now but every 2-3 minutes I have a small lost of internet connection, maybe a second or two, but enough to stop my streaming... Can someone check the rules and advise? /ip route add...

xtrgeo

Here is the HEX config /ip pool add name=dhcp_pool0 ranges=192.168.110.2-192.168.110.254 /ip dhcp-server add address-pool=dhcp_pool0 disabled=no interface=ether2 lease-time=3h name=dhcp1 /interface detect-internet set detect-interface-list=all /ip address add address=10.5.10.2/29 interface=ether1 ne...

xtrgeo

I'll post the config later but why do I need to use vlan's? My Lan's are completely isolated from each other, since I use different Lan for the interrconnection of the routers and different Lan's (and ports of course) for the clients Lan's. Besides this is one of the principal job of a router: to di...

xtrgeo

Hello, I have a simple network as in the picture I attach. My issue is that some clients on RB2011(on bridge interface) gets ip from the dhcp server that runs on the HEX and vice versa! As you can see on the diagram those two routers are connected directly (port10 rb2011 <--> port3 hex) and the 2 dc...

xtrgeo

Hi and thnks for the reply.

In fact I did what you said just before I saw your post. Further details is that I've putted the default queue above the pcq-download-default.
Also the default queue has the option that it has as parent the pcq queue. Is that correct or is it useless?

xtrgeo

Hi all, Interface 1 is my wan Interface 2 is my first Lan 192.168.10.0/24 Interface 3 is my second Lan 192.168.20.0/24 I want to limit the whole first Lan subnet to get 10M for download and 1M for upload,but in the same time,EACH ip of this subnet to be able to get maximum download 3M and maximum up...

xtrgeo

Thnks for the reply.

Just to make sure I understand correctly reading the manual:

Authentication without username/password is not possible for ANY type of client OR just wben client is a mikrotik router?

xtrgeo

Hi all, we decided to turn our OpenVPN server from a windows machine to one of our mikortik router. The implementation was much more difficult from the windows machine, I have to say! Anyway, the only clients we cannot connect anymore are our Grandstream IP Phones. can you please help me how to turn...

xtrgeo

Hi all, My configuration: Cisco SG200-26 PORT 1,2,3 TRUNK,CAN CARRY ALL VLANS,TAGGED All other ports are access ports on VLAN 10,20,30,40 RB450G PORT 2 HAS VLAN 10, PORT 3 has VLAN 20 PORT 4 has VLAN 30,40 so basically all 3 ports are trunk ports.No bridges. Ethernet cables connects PORT 1 of Cisco,...

xtrgeo

Hello,

no there is no solution yet.Still. using 6.20

If someone has any update on that,please notify!

xtrgeo

Very strange...

I think MT programmers should have a look on that.

With the same EXACT configuration simple queue is working on 6.20, but it's NOT working at 6.30.x....

xtrgeo

Could you please show us the way through parent queues?

Thnks

xtrgeo

xtrgeo

I've started with default conf and only the queue, after arranging the necessary IP's to the interfaces,dhcp server and default gateway.Nothing else! I am attaching the export here. Maybe you see something I cannot see! Thnks [admin@MikroTik] > export # sep/21/2015 10:55:05 by RouterOS 6.32.1 # soft...

xtrgeo

This probably will help you.. http://i.imgur.com/Njm1PMM.png?1 Create a new simply queue, as my picture bellow.. In interface you can select interface (as my scenario) or enter your guest network pool 192.168.6.0/24. That will limit 5M DL and 5M UL for all your clients that is connected to guest wi...

xtrgeo

Hi, I've set up my rb2011 with ether-1 as gateway interface,leeds to isp wlan1 is for my wireless laptops,set it up as seperate network (192.168.5.0/24) I've created a virtual AP(wlan2) for my guests,gave it seperate network (192.168.6.0/24). DHCP and etc works fine,everyone can get to the internet....

xtrgeo

Hi all, after reading wiki,forum,google research and so on, I can not figure out how to limit the bandwidth. 1. If i have a LAN with 10 clients,how can i limit so everyone of them gets,at the same time, maximun 100kbyte/s? So, if everyone is downloading something huge, the maximum throughput of the ...

xtrgeo

How should I use netinstall if the router is away from me,It's behind of isp's modem-router and I have no access to a pc inside the 493AH lan,as these are guests laptop,tablets,etc?????

xtrgeo

Nothing. It's totally empty...

xtrgeo

Hello, In one of my RB493 i see that my free disk space(64MB) is quit low. I do attach here the files and packages information. What is using my free space? I n the logs i only see 100 lines and i have no proxy enabled.

xtrgeo

Hi all, web proxy is enabled in mikrotik rb450g. Not transparent, so every client has the proxy address in it's browser. I use a parent proxy. Parent proxy blocks some specific urls. For these websites, I have configured a static route in mikrotik, in order to use another gateway and not my default ...

xtrgeo

Thnk u for that. The response time got a little better, but it still has some delay...maybe mikrotik's proxy cannot handle so many users at the same time or it's me having something wrong in my conf...

xtrgeo

Hi, is it possible to use the proxy only for access control and NOT for caching? Why i want to do that? I have a 2GB memory card on my RB450G and have it all available for cache. Cache contents has almost 4500 items.Connections are almost 250 and I also use a parent proxy. Do u think I have somethin...

xtrgeo

Seems like th PCC works fine now...Thnks for the help!

xtrgeo

Are you running a hotspot or proxy or anything like that? Those mess with PCC a fair amount and you need to modify the configuration to take into account the new packet flow through the router. Also "both addresses and ports" works well, but does have problems associated with it. It can b...

xtrgeo

Thnk u for the reply! I am attaching a link to a video to see the same again. By the time the video was produced, there were over 100 users behind the router, so at least the multiple devices and locations options, are quite high... http://www.youtube.com/watch?v=qCZ4utwFjfI You are right about the ...

xtrgeo

Any hint on this?

xtrgeo

Hello all, I've set up a PCC traffic balance according to the mikrotik wiki article on pcc. I am attaching two pictures. In picture interfaces.png you can see that traffic balancing is not actually working, as one gateway has a load of 2Mbps and the other some Kbps, usually no more than 50-100. In t...

xtrgeo

Hello dotnet

can u help me on that please?

http://forum.mikrotik.com/viewtopic.php?f=2&t=72850

xtrgeo

Hi all, I,ve configured my RB450G as: Eth1:Lan1 Eth2:Wan1 Eth3:Wan2 Eth4:Lan2 Eth5:Intranet I am using 2 Lan's because it's one has 2 IP's on it,in order to act as gateway for 2 small subnets and because those subnets has a lot of traffic between them. Eth5 is for accessing some building near via an...

xtrgeo

Hello, I am trying to set up an RB450G in the way below: Ether1 - Lan - 10.64.132.64/26 Ether2 - WAN1 - 10.64.132.2/30 Ether3 - WAN2 - 10.66.56.250/24 Ether4 - Antenna - 192.168.50.1/24 I have used all the instructions from this turorial http://wiki.mikrotik.com/wiki/Manual:PCC to make a load balanc...

xtrgeo

anyone???

xtrgeo

any help on this please?????

bump

xtrgeo

Hello all, I need some help in setting up a new network I am working on. There where 2 separete Lan's, with 2 separate gateways. Both gateways, required proxy settings in user's browser,in order to access the internet. I've putted an RB450G behind those 2 gateways and made the two separete lan's, to...

xtrgeo

It seems that the problem begins from the ADSL routers.As soon as I changed the ip service port on mikrotik from 80 to 8080,and forwarded this port from the ADSL routers,I can access the router from outside...
YES I will use secure connection and whitelist,thanks for the recommendation...

xtrgeo

Thnks for the answer. below is my confuguration [admin@xxxxx] /ip firewall filter> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=input action=accept protocol=tcp dst-port=80 1 X ;;; default configuration chain=input action=accept protocol=icmp 2 X ;;; default configuration chain=input ...

xtrgeo

Hello, my setup is that i have two adsl modem-routers for connecting to internet. Their Ip addresses are: modem 1: 192.168.2.1 modem 2: 192.168.3.1 These 2 are connected with my RB450G in eth2 and eth3 interfaces and their ip's are eth2: 192.168.2.2 eth3: 192.168.3.2 Using rules for pcc, traffic is ...

Search found 40 matches