Hi Jimfj, Unfortunately I don't use the Mikrotik anymore so I am not sure exactly what configuration I used at the time. In the end I decided that it was simply not worth the effort and I bought a newer-generation Fritzbox which supports everything out of the box. I do have the Mikrotik stored somew...

Yes, I did, but as I mentioned before that PIN seems to be completely ignored by the router. I sent a message about this to support@mikrotik.com but so far no reply.

I tested this today and the command works, as soon as I manually enter it the SIM gets unlocked and I can dial out. Unfortunately it does not survive a hard reboot. I tried to put AT+CPIN="1234" in the modem init string but all I get in the logs is an error to initialize the modem. Any ide...

Works fine, thanks again becs.

Thanks! I thought the solution should be something along those lines but I was not really sure how it could be implemented. I will give it a try and let you know.

Hey there,

Thanks for the answer, I will give that a try today or tomorrow morning and let you know.

But this seems to be an obvious bug, is this not known ?

Well, setting it up from the console is obviously not an option in my case, since the device will be in some remote location. But setting it is not the problem, I can set it up fine over Winbox when I pre-configure the router. The problem in my case seems to be that the Mikrotik is simply not using ...

Hi All, I am evaluating a RB411-3G as a possible replacement for a combination of Cisco router + external 3G modem for some remote locations. The router has to build an IPSec VPN connection to a central Cisco ASA and tunnel everything through, that is corporate traffic and internet access. In Cisco ...

Hi All, I am evaluating a RB411U-3G and I have some problems with the PIN on the SIM card. If I disable the PIN everything works fine, the PPP Client connects, gets an IP, I have internet access. The problem appears when I try to enable the PIN on the card. If I do that and I enter the correct PIN i...

Got it working in the meanwhile, it seems to work with this configuration: [admin@mt] /routing igmp-proxy> print quick-leave: yes query-interval: 2m5s query-response-interval: 10s [admin@mt] /routing igmp-proxy> interface print detail Flags: X - disabled, I - inactive, D - dynamic, U - upstream 0 U ...

First of all you need to tell us to which IP web.server.com resolves from within the local network. In case you are working with the default DNS servers from your ISP, that should resolve to the public IP of web.server.com, the one you see on Dyndns website. If not, then you have some sort of DNS se...

That's like asking if Mikrotik works well with Windows.

What exactly do you think the problem would be with Antamedia ?

Hi All, I have a problem with IGMP Proxy, can't get it to work. The Mikrotik sits behind a Speedport router, connected via DSL to Deutsche Telekom, IPTV Provider as well. If I connect a player directly to the Speedport, everything works. If I connect it behind the Mikrotik, it doesnt. I have configu...