MikroTik

si458

ive just realised i cant edit my vlans on my CRS125-24G-1S using winbox 4!
if i go into switch then vlan, the table is empty?

Screenshot 2024-12-16 at 14.55.47.png

yet open it up in winbox 3 and all vlans and other options are listed there!

Screenshot 2024-12-16 at 14.56.24.png

si458

missing feature: romon configured devices i originally could connect in 2 clicks (select device then connect) now i have to connect to a master device with romon first then go back into saved and select which device i wanted to connect to with saved creds also every time you close a connection to a ...

si458

BUG: every time i open up a torch for an interface, it seems to default to TCPMUX on the port? this is useless when you torch a PPPOE client interface, i have to remove the port option OR change it to ANY to get it to show data at all EDIT: also when you torch, the is no ports being shown, only IP a...

si458

Baragon, There are. Use same comment as group i also agree, im missing the group/note feature on the start page i have notes like FTTC for 3 routers, and they all say FTTC but i have groups set as site1, site2, site3 and i use to sort by the groups so it was split per site because i use the note bo...

si458

@normis any update on a native mac app for winbox? just seen your new youtube video and saw a NEW winbox icon, then found this post and realised its been around for 3 months now, surely the has been progress? ive been using https://github.com/nrlquaker/winbox-mac but the is bugs with the 'Open in a ...

si458

just went to post about this exact issue after switching back to mac from windows after 6 years using the 'Open in new window' seems to do nothing, then 30 seconds later, displays the 'couldnt connect, reconnecting', then suddently it just appears! but if you untick the 'open in new window' box it s...

si458

Please elaborate @si458: vlan attached to bridge and vlan-filtering on the bridge? Perhaps share (part of) your config? I have a bridge with 4 ports attached, ether2-5 I have a van setup on the bridge vlan9 Some reason inside the bridge settings vlan-filtering had switched itself on? I've never use...

si458

had a weird one with a site using a hEX S, upgraded from 7.10.2 to 7.11, suddenly all comps couldnt see internet, but all voip phones where working (on there own vlan attached to the bridge) spotted vlan-filtering was switched on, on the bridge, so switched it off, suddenly all comps get internet ag...

si458

i see the same issue as others with missing write sector
not visible in winbox app or winbox mobile app
but its visible via command line
hAP ac2 - RBD52G-5HacD2HnD - 7.8

Screenshot 2023-03-02 142818.png

si458

sorry to add to this old post but im having a similar issue, we have a 330MB fibre ive factory reset RB760iGS, PPPOE, no VPN,upgraded to 7.6, but i cant get more than 120MB through the speedtest? ive tried changing MTU on pppoe, no difference enabling/disabling the change tcp mss, no difference? dis...

si458

It is a known issue, follow also our social media, to be up to date: https://twitter.com/mikrotik_com/status/1435138440870379521?s=20 domain is suspended because of abuse by user(-s) or bad actors, not because of forgotten payment. we are working with registrar to solve it. Glad to hear you have ac...

si458

somebody forgot to pay the $35 to renew it for the year, it would seem
Did you have a look at expiry date by any chance before making such a conclusion?

oh yeh, my mistake, seems somebody suspended the domain then? as it should renew in april not september

si458

MAYBE somebody forgot to pay the $35 to renew it for the year it would seem :shock: Domain mynetname.net is suspended. Whats happen? Looking at WHOIS it doesn't seem like it has expired. But it definitely looks suspended. $ whois mynetname.net Domain Name: MYNETNAME.NET Registry Domain ID: 18566165...

si458

i was just about to post this message, it completely stopped our monitoring as we rely on these names because the clients IPs change from one week to the next # whois.PublicDomainRegistry.com Domain Name: MYNETNAME.NET Registry Domain ID: 1856616582_DOMAIN_NET-VRSN Registrar WHOIS Server: whois.publ...

si458

we have noticed a sudden increase in power current on our RB1100x4 with 6.48.4 ? it was bobbing at 450ma for months then after the update its jumped to 750ma? roll back to 6.48.3 and the current drops back to 450ma? Can this be related to other incorrect system health/voltage readings on some devic...

si458

we have noticed a sudden increase in power current on our RB1100x4 with 6.48.4 ?
it was bobbing at 450ma for months then after the update its jumped to 750ma?
roll back to 6.48.3 and the current drops back to 450ma?

si458

A fix for SIP related issue is not included in this release, but it is available in the 6.49beta11. If an upgrade to the testing version is not available, try disabling MNDP in neighbor discovery settings, see command below: /ip neighbor discovery-settings set protocol=cdp,lldp i just disabled the ...

si458

does this release include the fix for the sip issue with discovery?

viewtopic.php?f=21&t=171035&p=840901&hi ... et#p840552

si458

Hi R00tKit, we are experiencing similar problems, with CCR1016-12S-1S+ , since upgrade to 6.48 . SIP packets randomly disappear, mainly Siemens Gigaset A510IP A540 IP A690 IP affected. But RTP (UDP stream) also affected randomly the uploading (going out to internet) packets losts. Did you made a ro...

si458

I’ve updated the four of ours we have to 6.48 and no issue so far as well
The one router that was having the issue hasn’t rebooted in 2 weeks (fingers crossed!)

si458

I really like the form factor of 4011 series and considering to buy one. As I google for the 4011 problem, I came across this thread and so sad to read so many users have problem with it. Have you consider if the unit is under attack ? Check this out https://www.cvedetails.com/vulnerability-list/ve...

si458

As far as a support case, I've given up on those guys after multiple cases. All I ever hear is "It's bad hardware". Even when I point out how older ROS didn't have near the problem, they stick to their story. They're like a broken record. And when ask what hardware is broken, they don't k...

si458

Hi guys, I have two RB4011´s, while the first one is revision 1 and running flawlessly for months, the second is freshly installed (3 days ago) revision 2 and locked up yesterday. I´ve had to powercycle to make it work. They both have two WAN connection, no IPSec, few NAT and filter rules. I use SN...

si458

Hi jebz
The problem you have is the device locks up!
So you can’t create a supout file!?
As you have no way of accessing the device to generate it!?
All you can do is power cycle the router and then generate a supout file but that’s not helpful as it’s then a working router in there eyes
Regards
Simon

si458

Hi nje431

Out of curiosity, how do u power cycle them remotely?

We currently have one power port plugged into a ups and the other is plugged directly into the main power wall socket

If I could power cycle it remotely myself it would save so much time!?

Regards

Simon

si458

Hi All

ok so weird one, i rebooted the switch (the staff had all finished for the day, and nobody was in the building so saw my window!)

its now keeping time and not missing any seconds or freezing seconds?

very strange?

si458

only this one? Did this actually start with upgrade? Or was it present with previous ROS versions (but you did not notice it)? Obvious reason for that happening is CPU frequency way off what router thinks it should be (e.g. 20% slower than it should be). You can't see it only by observing timestamp...

si458

ive created a mini gif video to show the issue

si458

When you were upgrading ROS, did you upgrade routerboot as well? Sometimes there are (tiny) discrepancies between (old) routerboot and modern ROS which are only resolved by upgrading routerboot to modern version (shipped with ROS itself), which has to be followed by reboot of device (sorry for that...

si458

Hey Simon, Did you ever find a solution for this? I'm stuck at the same point as well with Mikrotik BGP + MetalLB. Hi, sadly no i didnt, i ended up using layer 2 with internal ip addresses on a small subnet /28 then on the mikrotik forwarding the subnet from external ips to internal ips with the sm...

si458

Hi All, im having a strange issue with a CRS125-24G-1S after updating 6.47.6 it doesnt appear to be keeping the clock correctly? every 20mins im getting the message sntp change time FROM => TO so ive connected into the switch and watched the clock in the address bar and what im seeings, every 3 seco...

si458

ill put my 2pence worth in if i may im having the exact same issue with our RB1100AHx4 for over the past year, it would run fine for a few weeks, then randomly lock up, only way of fixing it was to ask staff onsite to unplug/plug both power leads (i colored the power leads to make it easier for them...

si458

Hi All thanks again for all your input, and sorry again for maybe opening a can of worms by accident... all our servers with external ip addresses now have ipv6 within the single /64 range! ok sadly they are all static as to do BUT better than nothing and also to do it via dhcp(SLAAC) i would need t...

si458

Hi All thanks for the comments and suggestions! ok so after playing around with stuff, ive managed to get abit of the ipv6 working! no computers behind my router/firewall works but our servers all with external ip addresses work with ipv6! so we have progress! sorry i forgot to mention this isnt hom...

si458

I have a single ipv6 /64 range given to me by my isp That is normally where the problems start. Did you try to ask them why they aren't a bit more reasonable? I mean, I get a /48 and I don't think that is warranted, but a /56 or at least a /60 should solve many customer's problems... to be honest, ...

si458

Hi, thanks for the suggestion ive tried disabling accept-router-advertisements and that made no difference ive tried a static ipv6 on the wan and that pings anything externally fine but also external things can ping it BUT add the same static ipv6 to the lan instead of wan and that doesnt ping anyth...

si458

There's nothing obviously wrong in your description, but perhaps there could be something wrong in your config. If I was you, I'd try to export it and show it to someone. What config should I export? I’m guessing all the /ipv6 stuff ? EDIT: /ipv6 address add address=::1 from-pool=isp interface=ethe...

si458

Hi all I’m asking this because I’m bashing my head against the wall, I’m outta ideas and I’m probably just being thick! I have a single ipv6 /64 range given to me by my isp I have setup the DHCP-client with no issues and it retrieves the prefix no problem and assigns the pool correctly I can assign ...

si458

Hi, im also having the same problem with the same router ive had this problem however for the past 6 months and ive given up, we are unable to replace it as the replacements are too expensive and we require the fallover port as well :( from what ive read up in other posts and abit of googling it see...

si458

Hi IPANetEngineer i have already tried those examples and they dont work :( the routes get inserted via metallb themselves (not manually) and they are inserted as single route to each host NOT as a single route to multiple hosts e.g. 192.168.168.179 -> 192.168.168.156 - 200 192.168.168.179 -> 192.16...

si458

Hi All, this is going to be a far fetched question but through i would ask anyways ive got the BGP working with MetalLB and Kubernetes with our Mikrotik router HOWEVER its currently not load-balancing as they say it should, it only goes to one node instead of all 3 ive read up about it and apparentl...

si458

Hi All, im trying to find out if anybody else is having the same issue i am or maybe im just doing something wrong simple setup: Proxmox VM CHR 6.45.9 LTS, 1 wan - 1 external ip, 1 lan - 1 internal ip Server 2019 VM on internal IP IPSEC/L2TP setup iPad connects via L2TP/IPSEC to external ip over int...

si458

Sadly we notice downtime even for 2 seconds because 8 of the 24 ports shift 80mbps 24/7 on each ports because it's a storage network

si458

Only entries on the logs I can find are the link down for every port then 2 seconds later link up for every port
Nothing before or after it happens

si458

Hi
Surely if it was a earthing issue, all the kit would restart and not just the switch ports going off and on?

Same with the power supply? If was that all kit would be going on and off and its not

It's only the ports switching off and on again randomly?
Regards
Simon

si458

Hi All, im trying to find out if our CRS125 Mikrotik switch is faulty or i have mis-configured something or maybe even a hack attack and somebody playing tricks on me very randomly ALL the LAN ports on the switch switch OFF and then switch ON? i can see in the logs on the mikrotik the LINK DOWN and ...

si458

Hi
i noticed this over the past week scans for this file coming from loads of different ip addresses, should we be worried?

179.209.16.53 - - [28/May/2018:09:58:05 +0000] "GET /webfig/roteros.info HTTP/1.1" 404 476 "-" "Wget(linux)"

si458

Hi All hoping for some advise on setting up fallover and port forwarding correctly currently we have 2 internets, EFM LEASED (10MB/10MB) and FTTC (80MB/20MB) we have 8 vlans (101,102,...,108) the EFM and FTTC both have been provided with 8 IP addresses and each vlan (iprange) has its own external ip...

si458

A quick question! I see that the CHR fix for P1 license and error in Queue is not part of this release. Is there a plan when this fix, which is in RC, will be added to stable release? i was going to put a post up today saying i was having this strange issue where our CHR is being used for VPN and i...

si458

Hi All im having a strange one and i just cant work out whats going wrong? i have multiple EOIP tunnels linking our sites together, been working fine for months on end i have a bridge where all the EOIPs link into and I have a few LAN ports linked into the bridge together too BUT when a machine inte...

si458

You showed a pic of dns on the mikrotik
you have 3 dns entries
why is 192.168.1.1 there? It shouldn't be?
Try removing it, then restart both mikrotik and laptop and see if it works then

Sent from my iPhone using Tapatalk

si458

Hi all im having a strange issue with PPTP vpn on a mikrotik CRS i can vpn into the switch fine from my iphone, route traffic over it ok, see other servers, etc... however when i vpn into the switch from my macbook, i dont seem to get any traffic? i can see other equipment, the switch, i can get dns...

si458

hi,
tried a few things on that page and no luck,
when i try 'set ether2 vlan-mode=secure vlan-header=always-strip default-vlan-id=200'
it just simply says 'expected end of command'
it appears the is no vlan-mode and vlan-header, only vlan-type
i might have to keep looking

si458

Hi All im hoping someone can help me each server has 2 lan cards, 1 int range, 1 ext range, im using a mirkotik CRS we use to use bridges for each of the ranges and ports, but have since moved to using the SWITCH feature (master-slave ports) and its 10x quicker, and can handle more however my vlans ...

si458

Ok i have created a very simple test file for people to download to see where i am going wrong! MikrotikTest.zip it uses chrome.sockets.tcp so you can add the folder in chrome extensions as an app to test http://pastebin.com/hTd9XTCG - this is my index.js file which is where all the magic should hap...

si458

The other possibilities are that the sentence was ok, but login was refused. The API user needs to have the "api" permission, the address property needs to be empty or otherwise allow for your IP... and needless to say your password must be correct. Try to login with another API client, a...

si458

Wait, "=user="? You should be sending "=name=", and your code had it right... but the wireshark shows that's not what's sent in the end?

please forgive me its been a long day, I miss-typed/miss-spelt my post lol,
im sending it as =name= and still same results...

si458

What exactly (length bytes included) do the logs say you've sent? which logs are you referring to, is it possible to enable debug on the mikrotik router and see what it is receiving and decoding as? this is my javascript logs: [Log] done (index.js, line 190) [Log] ["done", "=ret=b4fb...

si458

The full thing that needs to go on the network after you get the challenge is ANOTHER /login (prefixed with its encoded length), followed by the response attribute word (prefixed with its encoded length), followed by a null byte (a.k.a. a zero length word). Are you sure you're sending all of this? ...

si458

Hi, Im still having no look and I just don't no what I'm doing wrong :( [code] var thechallenge = data[1].substring(5); // 7e3f5affe828fd31f9d0b83f163c33c7 var x = CryptoJS.enc.Hex.parse(thechallenge).toString(CryptoJS.enc.Latin1); // ~?Zÿè(ý1ùÐ¸?<3Ç var y = CryptoJS.MD5(String.fromCharCode(0)+vars....

si458

Hi, ok now im having a problem logging in :( i get the mikrotik to reply cannot login in, and i get a failed login in the logs for some reason my challenge that is getting returned i cant convert it correctly to get its values? example nodejs: =ret=cf 94 f9 5d 81 b0 fb 04 3e 01 8c 59 ec e6 fc 18 - f...

si458

function str2ab2(message){ var encodedLength = message.length; var buffer = new ArrayBuffer(encodedLength+2); var bufferView = new Uint8Array(buffer); bufferView[0] = encodedLength; for (var i = 0; i < message.length; i++) { bufferView[i+1] = message.charCodeAt(i); } bufferView[encodedLength+1] = &...

si458

Just add another call to chrome.sockets.tcp.send that sends "message", or better yet, make a single call that sends "abc + message", rather than just "abc". chrome.sockets.tcp.send(createInfo.socketId, abc+"/login", function(send){ console.log('send'); }); Er...

si458

Oh, so a mobile app, not a web app, I see. Well, in that case, it's limited to the device, so yeah, you could have it at JavaScript. I'd think you can use NodeJS client as a starting point, seeing that the core language APIs are almost the same. Just replace its sockets with the chrome sockets or w...

si458

You need to send both the length and the actual string which is that many bytes long. From your example, it seems you're sending just the length byte, but never the actual message. You don't get any reply, because RouterOS is still waiting for the bytes you told it to wait for. i.e. you send 0x06, ...

si458

Hi All, im hoping someone can help me or even point me in the correct direction im trying to create an front end in javascript and using chrome.sockets.tcp https://developer.chrome.com/apps/sockets_tcp ive got the browser to connect to the api port correctly and check its alive but i cant even do th...

si458

Hi all Strange issue I have with one of our RB2011 routers After upgrade to 6.31, after 24 hours the web panel becomes unresponsive and I'm unable to login, it just sits there saying Loading Another thing I've noticed is the SNMP agent goes mad Too??? the level and features on our monitoring softwar...

si458

Hi All, wonderful news I fixed the issue :D it appears I had the Change TCP MSS set to Default, and once I set this to YES, the connections started to work correctly :D so my guess is the Mikrotik had got itself confused over the Default and NO option of the PPPOE profile ? thanks for all suggestion...

si458

Hello and welcome. In my experience, odd SSL issues like this are really difficult to troubleshoot. However, I have seen, on more than 5 different routers, that the MTU can cause this. Make sure that you have a 1500 MTU on the whole network. Clients, switches, your router LAN/bridge, and your WAN. ...

si458

Hi All, im having a strange issue with one of our routerboard's RB750 for some reason, when a user visits an SSL website, it just seems to sit there and think about it and not work? I have everything setup correctly, masquerade, routes, I dont use any hotspots, webproxy, only have 3 firewall rules (...

si458

What version of RouterOS are you using?

Hi,

i was using the 6.12 when this problem first started, then when it crashed and died, i netbooted the new 6.13 version and the problem is still there

Regards

Simon

si458

Hi, we bought a batch load of the CRS125-24G-15-RM and i seem to be having issue with one of them... for some mad reason it locked up the day and a reboot crashed the unit and we had to replace the whole unit! the serial console kept showing me a kernel panic and i had to do a netinstall of all the ...

si458

Hi, hopying someone can help me with a issue im having with my CRS given external IP by ISP for EFM line, set it on Ether1 was then given a bank of ips routed down our ADSL line, which we no longer use and we just use a PPPOE session for 1 IP directly connected to the Mikrotik for some mad reason ev...

si458

i have managed to get it working correctly tho :) i put a mangle rule in the input so anything coming in interface pppoe-pc it puts a connection-mark as pc-in then a mangle rule on the output so anything with connection-mark as pc-in you then put a route-mark on as VOIP so it then goes back out of t...

si458

Route your gateway to the interface, no the IP. /ip route add dst-address=0.0.0.0/0 gateway=interface instead of /ip route add dst-address=0.0.0.0/0 gateway=1.1.1.1 The remote (gateway) IP address is then irrelavant, so doesn't matter if it's the same or not. HI, sorry for late reply... i have alre...

si458

Hi, we currently have 2 ADSL lines, BOTH being provided by the SAME ISP i have setup 2 PPPOE sessions, 1 down LAN1, and 1 down LAN2 the customer currently is experenses slow internet and sometimes no internet at all !? i have noticed in the routes table that the gateway ip thts given by our ISP is l...

si458

Check if you have put the same local or remote IP address on the profiles or in the user secrets! changed local ip address and nothing :( changed remote ip address and nothing :( both have different ip ranges too ? user1: 192.168.254.1 : 192.168.254.2 user2: 192.168.253.1 : 192.168.253.2 how do you...

si458

Hi, i have a question about using ipsec and l2tp i have setup the ipsec and l2tp together and works perfectly in our datacenter for me to VPN into our rack and do work and stuff i have setup individual users for my equipment (e.g. siipad,siiphone,etc....) connect from iphone over wifi and 3g ok... c...

Search found 78 matches