if you select snmp instead of routeros for the graphs, they seem to be displayed correctly again

Same behavior with dude server v6.47.2 on RB1100AHx4 Dude Edition. Here are a few examples of my graphs. Has anyone else this experience and knows how to fix it?

same problem here. since the update to 6.47.1, the graphs show the same misbehavior

Hi, i have fixed it by adding the following lines: /ip firewall filter add action=accept chain=forward dst-port=123 protocol=udp /ip firewall nat add action=masquerade chain=srcnat dst-port=123 protocol=udp src-address=hotspotnetwork Important: You have to place the rules in front of the dynamic hot...

hi
you can set bypass on ip binding

Thanks for your reply. But there is no solution to bypass only ntp-requests? Or am I wrong?

Hi there, is it possible to bypass ntp requests through mirotik hotspot? You can't assign a fixed ntp client for android devices, so that in my opinion you have to bypass requests to port 123. When i set /ip hotspot walled-garden ip add action=accept disabled=no dst-port=123 i get no hit on that. Sa...

Hi DLNoah, thanks a lot for your reply! Problem is solved! It was our firewall. It is learning the routes through ospf from it's neighbour. When a node goes down, the firewall uses it's default route to get a response. To solve the problem, we add an static route for the affected networks and all is...

Hi DLNoah, hi lebowski, first, thanks for your replies. The Dude is running as local admin. After the restart of the programm it run as local admin again and all went fine till a device that is monitored reboot or isnt't available for certain time. The same behavior is observable when it runs as a s...

Hi guys, we noticed a strange behaviour with our Dude installation (4.0beta3) on windows server 2008r2. All went fine for many years ago, we monitore >800 services (~90% only ping) on >800 devices (mikrotik and ubiquiti). The server runs on ESXi platform. Since we move our server into a new network ...

nobody?

Hi there! I got a little problem and hope somebody can help me: I've 2x RB2011LS, firmware is 6.4. The both sfp-ports are set to trunk ports. I've got some vlans through both 2011LS. On each end i've some access ports. To this point, no problems are present. Now I need at one end a new port (eth6 --...