Hi, I have issue with XR5 cards and RB433AH working in AP mode.The Routerbard's (3 of them) are placed in very well constructed plastic box, with needed air circulation. Strangely all the clients linked to AP fall down in 6 Mb/s connectivity, some 12, but the ping was very bad, several timeouts, one...

I have tried to setup Hotspot with User Manager in same MT machine , and I tryed different configuration samples, but in the end I didn't find the proper solution, the main reason in the end was maybe the 400 users load which I thing is too much. Now I am trying to find solution where I can setup PP...

ok I was enter to the setup but I can't understand some items if you can guide me how can I insert html page on it and where I can put it othere hand how much size I can put it other question can I use it e.g in on port like eth3 with no internet and make eth2 for internet please help me to do it I...

in winbox IP/hotspot click the "hosts" tab and find your pc's mac address and double click it then click "make binding" and set the type to bypssed. or click the bindings tab and add your mac address manually hope this helps Can this overide setting for freradius, or should be f...

MT reports in regular intervals to radius accounting about user logins and logouts. Everything I told you works in real life. I don't have dialup users, just LAN users, but they also disconnect improperly sometimes and they still can connect after that. It's very rare that someone can't connect som...

Anybody tryed wireless-test package with 5 or 10 Mhz channels, with clients, and for a time period?
If yes, what wireless card you are using, AP, and what kind of CPE, OS Version, normal througput with good performance ..?

Thank You in advance

Can somebody explain u, step after step, how to setup the uptime limit with FreeRadius and Hotspot.
This would be very usefull for all potencial user using hotspot with Radius.

Thank You in advance
Florin

Hello,

How to add the prepaid uptime for users with Radius and Mysql, and how the Radius to calculate when the user reached maximum uptime, and kicked out of network.

Please any idea, and how to.

Thank You in advance

When connection tracking is switched off, there is no problem. We have two identical bridges installed, one for over 1 month and the new one for one week. We had the same problem with the new one - packet rejecting. We compared configuration many times but we forgot to check connection tracking. No...

no not to florin, to support. we might have found the problem, we are working on it, hold on

Yes, you are right, but when I send you output from my routers, I didn't have any problem, so I though I can compare.
But anyway you are right, the file should go to support.

Thank You Normis

I think this not Gremlins but serious problem not only for me, I rebooted my MT six times today !!! I configured more than 100 wireless systems and routerboards, but I didn't have any kind of this problem in pure routing system. If the case is like my problem, I thing that problem is bridging the i...

I think this not Gremlins but serious problem not only for me, I rebooted my MT six times today !!! I configured more than 100 wireless systems and routerboards, but I didn't have any kind of this problem in pure routing system. If the case is like my problem, I thing that problem is bridging the i...

I don't know why you are asking about power supply. Simply because power supply malfuncion could cause router hanging. If I understanded Baczans question, then the router hangs after couple of hours, and it dont even answer to ping request. If it works OK, but only rejects ICMP, than I must agree t...

Are you sure that it is everything OK with their power supply? Try to switch the power supply from the router that works OK with the one that makes you troubles. I don't know why you are asking about power supply. I have the same problem(packet rejected), and the only answer from support was you ha...

Thanks Jober, Also here at my case, I don't have problem with bandwidth. My only issue is how to have less problem with frequency congestion. Using for example three Wireless Cardwith 3 sectorial anntenas, and same SSID - same frequency channel, would help everybody, having less interference. I thin...

It is possible to install, one Access Point, all the wireless cards (same frequency) with one SSID. This is due to interference and all other problems related to 3 non-over laping channels on 2.4 frequency. With one channel and one SSID, it easy to verify one least congested channel and try ussing i...

Hello, I am looking to put Cisco 1300 in work as AP, and I would like to implement VLAN's , in order to seperate more efficiently subnets, and also use two SSID. AS bacbone I am using Mikrotik 5 Ghz solutions, with two AP, using WDS. I would like also VLAN created in CIsco 1300 to last through Mikro...

Before two days and Install Point to Point Link which I tryed to connect via atheros interfaces(5Ghz Band) and using in one side with bridge mode, and one with station. But the problem is that I can not connect them, actualy the router in wireless bridge mode, does not assoicate another one. With sa...

Can somebody tell me what range can I get (aprox.) with the following equipment in 5.8 Band: AP RouterBoard Atheros 100 mW wireless Adapter 1.5 m Cable 17 dBi 120 deg Sectorial Antena PacWireless Client RouterBoard Atheros 100 mW wireless Adapter 1 m Cable 31 dBi PacWireless Or you even can prefer m...

I think maybe the solution is to redirect the msn messenger port to the right gateway.
It is hard to know to msn IP range of IP, if somebody know please let me know.
Anyway how to redirect all MSN messenger traffic (1863) to right gateway.
I am trying without success.
Thnx

I would like to ask you does anybody tryed to form an Access Point with 3 wireless adapters and 3 sectorial antennas. Each wireless adapter connected to one sectorial antenna, and use same ssid, working all in bridging mode(all wireless adapters). Please if somebody tryed, explain a little bit confi...

Thanks for the help, The new routing is working without any problem, but the MSN messenger it having a problem. Lots of time it disconnect the users and they should login again.I assume the problem is becuase of two gateways, and each gateway is different provider, and use different routes. What is ...

Hi Normis,

I know about : ip route> add gateway=x.x.x.x,t.t.t.t, but then I get full of ussage of small bandwidth, but I can not understand the code :
ip route> add gateway=x.x.x.x,t.t.t.t,t.t.t.t, with priority.
Can you please detailed explain me what is indicating last t.t.t.t
Thanks

I have a issue with two gateway.I have two Internet Access Links, and I wann't to use both of them, but they are not equal in bandwidth, one is twice as another.
How to use both of them, with priority or any other possible solution.
Bye