Updating two NetMetal 5 from 6.44 to 6.48.5 were okay. but when I update bootloader the device start to flip flop on ether1, so I had to bring them down netinstall to 6.47.10 and everything seems okay then! I do not recommend anyone to install this long-term version!

Hi, I have problem I would like to know if anyone else has the same issue or not. after I upgrade my whole network from 5.26 to 6.25, I have seen very strange problem in Two routers in two different site both have same issue! whenever I restart the routers which you can see in picture the link relat...

I am going to share how I solve this problem mth: I have same problem too, can you explain more about your rules. for example if AD server has an IP like 192.168.1.200 on ether2 and Local zone be on ether4 with this subnet 192.168.11.0/24. Which Rule did you use to solve the problem. Beside I have ...

Thanks everyone, I am going to share how I solve this problem, from the beginning I suspect the whole process of hotspot and I start to check and finding out that the wall garden IP is not working as it should work in some scenario. In order to narrow down the problem I set up a brand new RB751, and...

Hello mth, I am not really sure, but do you using in each Subnet a separate DHCP server? If it is so, should you perhaps only enable or set up on as an DHCP relay and the other as a DCHP agent? I mean you run at the MikroTik a DHCP and on the AD also? I just use the dhcp server of router, I have se...

I don't have universal nat, because if i had, by disabling just hostspot server the problem wouldn't be solve.
By the way the router is 1100AH.
any suggestion?!
Thanks

Hello mth, perhaps a small false of thinking only. Internet---------Router -------Switch------AP------------Klient computer | | | Server / AD Please try turning the HotSpot to an WLAN AP. You will connect to the WLAN AP and than you will be auth. at the AD Server and you are able to use the interne...

Thanks dobby I think you get it wrong, I don't have wireless here, I am using hotspot to auth for those who wanted to use internet. Here I draw a simple diagram which somehow similar to mine. the hotspot has been applied to E3 interface which is connected to Client zone. internet--E1--router--E3-(ho...

Hi there, I have problem which is related to hotspot, I have Active directory which is not in the same subnet of my client computer. My client computers using hotspot in order to authenticate and use internet. So I add my server IP to wall garden IP, and let client by pass the hotspot in order to re...