Hello, Normis. This feature needs in many cases. Our network ARP timeout standard is 4minutes (1 minute less, that CAM timeout). I want to adjust it on RouterOS too. Low value makes high level of broadcast flood. This tunable on most of network devices. >How does the blackhole route relate to ARP ca...

Hello!

Are it possible now?
After RouterOS was positioned as CoreRouter.

I see timeout = 1 minute on my border router, with Internet Exchange it is too little time.
That does not allow to use the blackhole service.

Hello, I have same problem On CloudCoreRouter 1036 I miss password (changed by command line, probably, with mistyping). Can I reset password without config reset? (by serial port / LCD display , etc..) or Can any autosave config to file is running by default before configuration reset? (by LCD with ...

Hi,
How to clear IPv6 NDP neighbor table?

Need to clear some NDP records,
or all NDP table.

Hi,
Same question.

Hi! We faced same problem on 5.2.2 Fragmented IP packets was randomly dropped, in random data streams (directions). To Support: please, pay attention to this problem. Our clients suffer. Report, please, if problem in the last ROS version is solved.. Test: Ping with big fragmented packet (all lines, ...

Hi, I found a workaround - to add in all incoming route filters parameter of the local source address. sample: /routing filter> add action=accept chain=ix-in match-chain=avoid-bad set-bgp-local-pref=200 \ set-pref-src=x.x.x.x ^^^^^^ On the other hand, it is not clear, why L2TP the server doesn't ans...

Hello, We want to use dynamically created(/destroyed) queues per each customer IP for make same bandwith limit for every customer. Unfortunately, such design doesn't work: add limit-at=10M max-limit=50M name=queue-out packet-mark=mark-from-home parent=common-out priority=4 \ queue=queue-type-per-ip-...

Hello, We use L2TP server on Router OS. The client make connect to certain IP address "X" (of L2TP server) that was configured on interface vlan "A" The route to the client goes also through vlan "A". Everything works. But when the route to the client is moved to interf...