MikroTik

nelson6069

anyone facing DNS ip change to another ip, which is not set by network admin?
I set to 8.8.8.8 and 8.8.4.4 but when i login system see, it auto set to another range ip which is not set by me..
I have few site facing these issue recently..

nelson6069

I have problem with DHCP relay problem with infoblox, from mikrotik there it show request, but no respond... anyone having this issue? it is need to bypass some port no? Here is my setting: /ip address add address=10.20.10.11/24 interface=ether1 network=10.20.10.0 add address=10.22.0.2/16 interface=...

nelson6069

I am unable to load mikrotik login page at browser, i try another browser, another few pc also same result.. Upgrade from firmware 6.27 to 6.32.2 also same. Login Page http://s29.postimg.org/fxza1ed3b/20_10_2015_10_18_56_PM.png Userman Page http://s3.postimg.org/aqy5ud2tv/20_10_2015_10_25_42_PM.png

nelson6069

11836775_818086854972056_8890650967191099756_n.jpg

nelson6069

anyone having this problem at v6.28? After i upgrade to v6.28, my router will stop function after sometimes, i cannot using winbox login, cannot get ip address from DHCP server, the router like totally freeze, i need to physically turn off the power and on the power again? It is happened on my CCR10...

nelson6069

I would like to ask CCR1036-8G-2S+EM able to handle this bandwidth and bandwidth management? Internet Speed: 1Gbps speed dedicated direct internet to ISP Desktop : 1000pcs desktop PC Mobile users including Notebook, Mobile Phone, Ipad, Tablet : estimate 3000pcs Need to allocate certain bandwidth for...

nelson6069

how to set 1 router is backup if another 1 is down?
I will buy 2 CCR, 1 for current use, another 1 for backup, so if 1 is down, it will straight failover to backup CCR, may i know how to do that? what method?

nelson6069

I would like to ask CCR1036-8G-2S+EM able to handle this bandwidth and bandwidth management? Internet Speed: 1Gbps speed dedicated direct internet to ISP Desktop : 1000pcs desktop PC Mobile users including Notebook, Mobile Phone, Ipad, Tablet : estimate 3000pcs Need to allocate certain bandwidth for...

nelson6069

Auto limit each ip address speed in the network? instead of type it one by one.. Like this WAN is 8Mbps speed and using local ip address as 192.168.1.0/24 Any others way i can set 1 rules that will auto limit each ip address only giving 0.5Mbps instead of typing 192.168.1.2/32 , 192.168.1.3/32 until...

nelson6069

Is this cause by wireless inteference or router site? My gateway is 172.16.0.1 using Mikrotik CCR router with hotspot function build in mikrotik and AP using ruckus wireless. this is the latency i ping to gateway. The PC is not load anythings. But the latency is like this. http://community.ubnt.com/...

nelson6069

have you read this? http://forum.mikrotik.com/viewtopic.php?t=40584 if not, you should... Anyway, RB750 has eth1 that cannot be put into switch (so only eth2-5 can be switched.) So, put eth2 as master port to eth3, eth4 and eth5, then make bridge1 and put eth1 and eth2 into this bridge. Use eth1 fo...

nelson6069

Your settings make bridging not switching. If you want to switch ports you should set one of ports as master to other ports.

I should link my master port to core switches?

nelson6069

On the RB750 you can set port speed and comments per interface, two things that help us immensely in a production environment. So we just use RB750 units as switches in a few remote locations. It also gives us tools to bandwidth test to/from to check the wireless radio connections and such. So basi...

nelson6069

On the RB750, you would be better off to put your uplink on any port other than ether1. That way the switch chip would handle most of the traffic. Of course, if we are talking RB750UP, the POE aspects may confine what port you use for the uplink since no POE-out on ether1. What mean about this &quo...

nelson6069

Of note: if you use the RB750/RB750UP, the switch chip only includes ether2-5 (not ether1), so you'll have to use the CPU-based bridging. If you only use standard bridging with Fast Path on, you'll probably achieve close to 100Mbps aggregate bandwidth in that sort of configuration. But if you start...

nelson6069

Only need switches function, which is more suitable? 1.MikroTik RB260GS 2.Mikrotik RB750 Both are same price..If buy Mikrotik RB750, i will set all port bridge... My bandwidth is 100Mbps connection... all kind of traffic... able to handle 80 devices traffic from PC or mobile phone.. it is a students...

nelson6069

I want to ask about RB260GSP, from the website, it say it have POE output at port 2-5 same as the POE input..
It is mean if i use POE 24V connect to ether 1 to give the switches power, i can use the same POE output 24V for ether 2-5?
Will it be too hot or burned?
Do i need to have another DC power?

nelson6069

anyone can share their experience with CCR1016 that you have tried how many concurrent clients before with no issues?

also can share others model of routerboard..

nelson6069

Disable cookies in ip/hotspot/server or server profile. Tell me if it's fixed please.

But look like it is not allow for me to keyin any link at Dst Address.

nelson6069

I want to block most of the port because my ISP offer my network small bandwidth 13Mbps for 480 clients network. I want to block all services except web suffering purpose for the network.

nelson6069

I want to block most of the port because my ISP offer my network small bandwidth 13Mbps for 480 clients network. I want to block all services except web suffering purpose for the network.

nelson6069

yeah you are better off using the Proxy + whitelist if you only want to make some services available. It will block everything else. Can also setup firewall rules to allow only specific ports and block the rest. As far as limiting speeds go, can either use the hotspotor a simple queue to limit the ...

nelson6069

A Hint: Any malicious user can set any port for any service, like P2P on DNS, WEB o VoIP port. do not waste time to try to block ports for load balancing. Use HotSpot instead. Each students has the bandwidth limit you set. I had set each user limit, but now i want block all ports except the port th...

nelson6069

If you disable the hotspot, can the clients access the internet? Is dns set up correctly? Do you have "allow-remote-requests=yes"? I am not sure i disable hotspot the clients can access internet or not. But if i remove from DHCP and ARP there users can online. If i remove at DHCP but NOT ...

nelson6069

How to block unnecessary port or allow important port? It is a students hostel network, and our ISP is offer us a low bandwidth. So i wish to block all unimportant port to disable they use some program for download. Is this the port that cannot be block? http://www.webopedia.com/quick_ref/portnumber...

nelson6069

why sometimes, clients PC cannot go to login page or any others website..
but they can get ip address..
i need to remove their ip/mac address from IP>ARP and DHCP server there, then they just can load the hotspot login page..
Anyone have idea about this?

nelson6069

Who ever know how to configure 4 WAN load balancing and squid proxy server, please email me at tpwifi.tech@gmail.com
Also email me your price. TQ.

nelson6069

actually i am not using any radius server, i use mikrotik, and not using userman, i create at IP>Hotspot>user there only... i create user manualy one by one at ip > hotspot > user Then that is why the radius server is not responding. Turn off the radius for that hotspot profile. /ip hotspot profile...

nelson6069

What radius server are you using?

actually i am not using any radius server, i use mikrotik, and not using userman, i create at IP>Hotspot>user there only...
i create user manualy one by one at ip > hotspot > user

nelson6069

Radius server not responding..
change the username to the same user still the same problem..
but others network clients can login without any problem...

nelson6069

Anyone know how to do this?
Loab balancing and Qos For cybercafe.

nelson6069

Any access point recommend for my hotspot network?
I have tried UBNT unifi AP, but look not performance good, any brand of AP recommend which the price range is around UBNT level?
Each AP will reach 25 concurrent clients MAX at night.

nelson6069

I want to install squid for caching my network clients files, my network have around 450 clients and all of them are students. May i know which is more important for squid hardware requirement that will affect performance? Processor? RAM should be big? HDD should be big size and faster? For my curre...

nelson6069

Change ttl in mangle rule to 1

Send from my mobile phone using Tapatalk.

in every rule?

nelson6069

how to avoid hotspot users to use connectify apps to share?

I found out that, my hotspot clients use connectify program to share the internet connection to their friend, but the username i only allow for 1 devices. Anyone know?

nelson6069

Hi, i would like to ask how can i bypass only one link when the user haven login to hotspot network at login page. Because i do an announcement box, but every time i want to update the announcement, need to edit the html, but it is hard for the one who don't have enough knowledge in html and mikroti...

nelson6069

It supports ipsec, and l2tp. I'd personally use l2tp over ipsec

Sent from my SCH-I545 using Tapatalk

but in my router, i cannot find this..

nelson6069

And what methods does it support?

http://www.meetgadget.com/gadget/24954/Aztech+DSL605EW

nelson6069

http://s28.postimg.org/6mwje0tvh/Untitledpptp.jpg Which method should i use? Connecting Remote Client or Site-to-Site PPTP http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP My tp link router cannot do pptp.. Only at mikrotik side.. What does the TP-Link support? What model is it? sorry.. type wro...

nelson6069

Which method should i use?
Connecting Remote Client
or
Site-to-Site PPTP
http://wiki.mikrotik.com/wiki/Manual:Interface/PPTP
My Aztech DSL605EW router cannot do pptp.. Only at mikrotik side..

nelson6069

No, RouterOS doesn't have such feature at the moment.

add in this feature in next update? XD

nelson6069

Yes it can
http://routerboard.com/RB951G-2HnD

The power between 8-30V all can it is?

nelson6069

RB951G-2HnD can use UBNT 24V POE adapter?

nelson6069

RB951G-2HnD will auto change wireless channel if it detect the area have too many wireless network using same wireless channel and cause inteference?

nelson6069

Userman username cannot be remove?
I can successfully disable it, but cannot remove it, it show All operation fail.
Anyone know how to solve it?

nelson6069

how squid works? It only will be cache the content of the link that visit the most? Or it start caching when the first people visit the site? And it will continue caching until the HDD space full, then it will clear the earliest cache, and replace by the latest one? And i found this details at http:...

nelson6069

Maybe there are no faster ISPs in his country. In this case, students might be used to such low speed. Depends on their requirements, and on what other provider speed is in your country or city. If you normally get 100Kbit in a Cybercafe, maybe this could work. Ok ;-)). I know only my students. At ...

nelson6069

Our ISP just offer 1Mbps, 2Mbps, 4Mbps, and 8Mbps connectionfor us. You should search another who offers more. May be you have to ask for Business Connection. 480 students is a quite big Network. Students eat more traffic than average people. We have 13Mbps connection lease line already, but it is ...

nelson6069

Our ISP just offer 1Mbps, 2Mbps, 4Mbps, and 8Mbps connectionfor us.

nelson6069

Anyone tried using one CCR1016 or RB1100AHx2 or higher spec routerboard to run Load balancing (11 WAN connection with 4Mbps/512K DL/UP), Runing Butch evans script, Hotspot server, Radius server, Userman for a 500 users network?

How is the CPU usage?

Can CCR1016-12G Handle it?

nelson6069

13Mbps for 480 students network? any recommendation? Anyone had setup this kind of network? Any idea to set the Qos? Any proxy server use? This is crazy low. You should by all means inrease bandwidth or you'll run into problems. I would go with at least 100Mbits. We feed 300 Students with 100Mbits ...

nelson6069

13Mbps for 480 students network? any recommendation?
Anyone had setup this kind of network? Any idea to set the Qos?
Any proxy server use?

nelson6069

Check if you have some kind of logging to disk. I just don't know what else could be producing that...

problem solved.

nelson6069

HDD space keep decreasing, 5 min decrease 1MB?
Anyone know how to solve it?

nelson6069

I used RB1100AH x2. The same problem.
Does anyone have any advice for this problem.
Here my config
dolaivan

Try both address only?

nelson6069

Who ever use mikrotik hotspot, UBNT M5(for bridge), Unifi AP setup network?
Please contact me at tpwifi.tech@gmail.com

nelson6069

All of your configuration possible in one Router Board.

Can email me at tpwifi.tech@gmail.com?

nelson6069

anyone able to configure 4 WAN Load balancing + Hotspot server including userman, radius in one CCR.. please email me @ tpwifi.tech@gmail.com
PM me your price as well..

nelson6069

i m using hotspot & radius, but not facing such issue yet

I am using 2 CCR for my network, one is radius, one is hotspot..

nelson6069

Increase the timeout value on your mikrotik-embedded radius client ; i personnally found that the defaut value is way too low, i have put it to 3000ms and i now have no more problems.

i had increase, but still happened..

nelson6069

hotspot user cannot login because it says "RADIUS server not responding"..
then the users keep trying, but still cannot, then after 10++times tries, just can login, anyone having this kind of problem?

nelson6069

anyone using mikrotik to do hotspot? Do your hotspot clients complaining sometimes they login their username, the system will say "Radius server is not responding"? Then need keep login a few times just can successful login. Between the login for userman, sometimes i cannot login, it will ...

nelson6069

why every time i restart my CCR, hotspot user login with their username, and the error msg keep show radius server not responding?

nelson6069

You can't use a hotspot there? You can't use user manager there? You should post the PCC load balancing stuff. Maybe someone will see a problem. /ip address /ip firewall mangle /ip firewall nat /ip route hi SurferTim, can i have your email? Or can you contact me at nelson6069@gmail.com ? need some ...

nelson6069

You can't use a hotspot there? You can't use user manager there? You should post the PCC load balancing stuff. Maybe someone will see a problem. /ip address /ip firewall mangle /ip firewall nat /ip route i didn't set any security for the network access from public, so i replace the last few number ...

nelson6069

nobody has it

why don't mikrotik active it?

nelson6069

Isn't there a less expensive way to do that? Can you temporarily disable your load balancing for a test? Use only one WAN (no load balancing) and see if the symptoms persist. If you can login all the time, or never, then you will know where the problem is. It may require a simple fix. If it makes n...

nelson6069

My point is: You have load balancing on that router, and you can't login except after a "few attempts". If it is the load balancing affecting your login attempts, then every 4th attempt will be successful, whether it is just one client trying it 4 times, or 4 clients and only one logs in....

nelson6069

One for 4 WAN PPPOE load balancing , another one for hotspot server. and later... The hotspot user always cannot login, it say RADIUS server not responding. but after a few try , they have successful login. It wouldn't be every 4th login attempt that works, would it? you mean the user need try unti...

nelson6069

Because it is disabled.

for all the member or my account only?

nelson6069

Is user manager in the same router, or is it remote?

at another router.

i use 2 CCR1016.
One for 4 WAN PPPOE load balancing, another one for hotspot server.
But userman database host at first router.
hotspot server host at CCR2.
Because i am unable to use PCC with hotspot, so i use 2 CCR to do it.

nelson6069

anyone know why i cannot private message?

nelson6069

That is a different problem. Normally I see that with FreeRADIUS2 as the RADIUS server. There is a 1 second delay on Access-Reject messages. Try this. /radius print detail set 0 timeout=2s i am using mikrotik own Radius server. here is the detail.. [nelson@TPWiFi2] /radius>> print detail Flags: X -...

nelson6069

You need to bypass them only if you want to access them from outside the hotspot interface. add: ...or the device needs access to the outside world for NTP, DNS, etc. It shouldn't affect the speed of the network unless one or more devices are unruly and try to connect to the internet non-stop. what...

nelson6069

it is necessary to add switches, AP MAC address and ip address to ip binding for hotspot network?
will this affect the speed of the network if i didn't set it?

nelson6069

add to ip-binding all mac for ubiquiti devices. it is add under hotspot server there? how about some devices i have set static ip address, and it only show at ARP there? do i need to add IP binding at hotspot server again? It is necessary to add all the UBNT devices including switches, Access point...

nelson6069

add to ip-binding all mac for ubiquiti devices.

at hotspot there?

nelson6069

I have setup the hotspot using CCR1016, and connect to UBNT toughswitch and UBNT unifi AP. When i connect to the hotspot network and after login, i can ping from clients pc to gateway, AP ip, toughswitch ip address, BUT i cannot ping from CCR terminal to TOUGHswitch ip address, AP ip address and als...

nelson6069

Login to Userman after you restoredthe database to the new router

then as I described earlier.....

RGDS

Thanks, it works

nelson6069

anyone know how to use the userman(Burst Rate, Burst Threshold, Burst time)? What is this 3 for? The burst rate it is the Max speed for the user can burst? Burst Threshold it is the max size that the user can burst? If i set 3MB, it is it only boost for 3MB when the user start login to hotpot networ...

nelson6069

who ever use RB450G to host hotspot, DHCP, radius server on more than 400 clients network?
what is the maximum number of clients have you ever try on RM450G?

nelson6069

should use desktop or server version of ubuntu for squid? use desktop versions only for desktops. it comes with a lot of stuff which is not needed on a host running server tasks. less what can fail from a stability,safety and security perspective. does squid really help for decrease traffic direct ...

nelson6069

The physical port is not going to be the limiting factor. The cpu is more likely the limiting factor, depending on how much traffic you expect to be going through the router and how many filter rules and queues you have.

ok:)
thanks:)

nelson6069

Hi!

Have you tried to remove the active sessions(xx A Sessions) in USERMAN?
Mark the sessions and "Close" under "Edit" menu

RGDS
Jörgen

you mean during backup?

nelson6069

i had backup userman database, and load it to new router, but when i successful load, and i go into userman page, there is some active user show at userman there, but i go to winbox, under hotspot active user, there is only one user which is me. But from userman there, it show 37 active users, and ...

nelson6069

The config is retained between versions, just drop the file into the root directory and reboot the device.
Reboot from /system reboot, don't just repower as the upgrade is done before the router reboots, not as it powers up.

so if i downgrade to 5.25v from 6.1v, the config will be not same?

nelson6069

i had backup userman database, and load it to new router, but when i successful load, and i go into userman page, there is some active user show at userman there, but i go to winbox, under hotspot active user, there is only one user which is me. But from userman there, it show 37 active users, and i...

nelson6069

should use desktop or server version of ubuntu for squid?
does squid really help for decrease traffic direct go thru WAN?
does squid need update always?

i hear someone said, if youtube change script, then proxy server also need to change script to cache youtube, it is true?

nelson6069

upgrade ROS to v6.2, the configuration will be gone after upgrade?
It is i just drag and drop the package into file at ros there and restart it?

nelson6069

post your export from routerOS.
/interface bridge
add l2mtu=1590 name=bridge-hotspot
/ip hotspot profile
add dns-name=tpwifi.login hotspot-address=172.16.0.1 http-cookie-lifetime=1d \
login-by=cookie,http-pap name=hsprof1 use-radius=yes

anyone know?

nelson6069

can 400+ hotspot user use only one ether port at CCR unit?
Can one ether port handle it?
Each physical port can handle up to 100 or 1000 mbps.

so there is no problem with how many hotspot user going thru one port?

nelson6069

How to know it is someone using some software for example p2pover to control the network?
Because i am not sure it is some users is using this software to control my hotspot network. it is a hotspot network and may up to 400+ clients, it is hard for me to check.

nelson6069

can 400+ hotspot user use only one ether port at CCR unit?
Can one ether port handle it?

nelson6069

post your export from routerOS. /interface bridge add l2mtu=1590 name=bridge-hotspot /ip hotspot profile add dns-name=tpwifi.login hotspot-address=172.16.0.1 http-cookie-lifetime=1d \ login-by=cookie,http-pap name=hsprof1 use-radius=yes /ip hotspot add disabled=no interface=bridge-hotspot name=hots...

nelson6069

Anyone having problem using CCR1016? And how many clients do you have? Currently i have about 80-100clients. I am using hotspot for authentication, and using userman to limit each user speed. I found that if the active hotspot user more than 60++, the network become very slow. The WAN link is 20Mbps...

nelson6069

signal strength , calculate Rx Tx its very essential to do your calculation when using wireless internet.. maybe your end-user needs a receiving antenna. they are getting 50%++ signal. How to calculate Rx Tx. This should be do the setting at mikrotik router or wireless devices? I am using UBNT prod...

nelson6069

how many user?

if you are using mikrotik routerboard for 500++ hotspot account, it doesn't have enough capability for 500++ hotspot user..

currently i think have more than 400++ users.
I am using CCR 1016-12G

nelson6069

Recently i bought CCR-1016 router board, where i have the problem of "error simultaneous session limit reached" appeared for a lot of our clients, i tried to find out the way to solve this but i cant, the only thing that appear not logic that the session for the same user was repeated or ...

nelson6069

thank you for your help but the main problem was in configuration of radius server and already it was solved thanks; I want to ask you, you limit the user to 1Mbps speed it is? It is the user can get nearly 1Mbps, or below than that? because i set the user to 2Mbps, but hotspot clients just only ge...

nelson6069

use print or export at the terminal.

export which part?
or all?
if all i think will be very long, because i have create 500++ hotspot user..

nelson6069

Please export the exact commands

how to export it?

nelson6069

when i set the user limit to 2Mbps download and 1.5Mbps upload, the user only get 0.2-0.7Mbpsdownload and 0.5mbps upload.
But when i set the user to 5Mbps download and upload, the user can get 4.5Mbps and above, may i know what is wrong?

nelson6069

hotspot user complain line dropping.
May i know what is the problem?

nelson6069

Have you checked from your end. Connect your system from the hotspot switch and check whether you also got disconnection then the problem is from your server or hotspot interface. If you not disconnected then the problem is with wireless access point. By the way may i know which type of CPE and acc...

nelson6069

PCC load balancing will make latency become high?
i have 4 WAN link with 20Mbps download/upload.
The latency before load balancing on each wan link is 20-30ms,
but after load balancing, it become 80-130ms, it is load balancing will like this?

nelson6069

Hi,

May I know how your users are connected through. I mean wire or wireless?

wireless..the wireless is still connected, but it says limited access, then after few second internet come back.

nelson6069

hotspot user complain disconnect during using. may i know what is the problem?
they suffer internet, but suddenly disconnect, then after few second connect again.

nelson6069

hotspot user will limited access after sometimes, mean it doesn't have internet connectivity after sometimes, but the WAN link is up.
what is the problem?

nelson6069

Dude, you sound like an amateur. :lol: Mac address and IP address is not shown at DHCP server. If you really want to see them then you should look them up in the ARP table. :wink: at DHCP i am new to mikrotik. i thought it still will show at DHCP server, because some pc i set as static at DHCP ther...

nelson6069

i have 28 Access point and all of it i have set it to static IP address, but i didn't see any Mac address and IP address at DHCP server that related to my Access point. So all your ips are all static, and none show up in your dhcp lease list? If I understand what you are saying, then everything is ...

nelson6069

i have 28 Access point and all of it i have set it to static IP address, but i didn't see any Mac address and IP address at DHCP server that related to my Access point.

nelson6069

Yes, we have several 450 boards that run 100-150 room hotels that see more than 60 users a day with load balancing. For $30 more it might be worth it to go with the G board though, or a 2011 for a bit extra power.

How about your wan link speed?

nelson6069

Can RB450 handle 60 clients network which are students with the following function?
if they are all active at the same time.
Load balancing with 2 WAN
Hotspot
Simple Qos

Between, is 2 X 8M/512(DL/UL) WAN link enough for 60 clients network?

nelson6069

which load balancing method should i use? The network is serving 280-500 user, and all are students, i have 2 router, one is for hotspot and another one is for load balancing. i have 4 WAN link which is 20Mbps DL/UL each. i found that if using some load balancing method, some website will logout aft...

nelson6069

Are you talking about attempting to login with the same user/password more than once? If so, you need to increase the value for shared-users. /ip hotspot user profile set X shared-users=2 If not, then you may have a problem with your license on that Mikrotik device. If you have a level 4 license, i...

nelson6069

If I am already logged in, I can't get a login page either, but that is how it is supposed to work. I get a status page instead with a logout button.

do you know what this message mean?
"simultaneous session limit reached"

nelson6069

Can mikrotik track which hotspot user access which site at what time?

and do i need to create a right, term and condition page for my hotspot to protect my self against illegal usage?

nelson6069

My code is over here. [admin@MikroTik] > /export compact # jan/04/2002 15:35:22 by RouterOS 6.0rc13 # software id = Q8EC-lDTH # /ip dhcp-server add address-pool=dhcp-pool-1 disabled=no interface=ether1 name=dhcp1 /ip address add address=10.0.0.1/22 comment=LAN interface=ether1 network=10.0.0.0 add a...

nelson6069

If I am already logged in, I can't get a login page either, but that is how it is supposed to work. I get a status page instead with a logout button.

ya.. I can't get a login page.

nelson6069

this morning when i connect to the network, it will redirect to the hotspot login page, but now i will not redirect to the login page. even i type my hotspot login page url also cannot. what is the problem? Can you access the internet? If you still have "login-by=cookie,http-pap", then yo...

nelson6069

How does the wireless device fit in here? I see no wireless settings there. Is the wireless router (access point) connected to ether1 somehow? Maybe a separate piece of equipment? If so, you can increase the number of ips assigned to one mac address (wireless router?). /ip hotspot set hotspot1 addr...

nelson6069

When i am using LAN cable connect to my pc, this will not happened. But when i connect thru wireless access point, it will appear this problem. Both are under the same network and hotspot, just the connect method is different. One is using LAN cable and one is using wireless . That is two physical ...

nelson6069

but i have no problem if connect thru cable. i just will have this problem when i connect to Access point and try to access the network. What does this mean? You have two separate physical interfaces involved here? Both are on the same hotspot? wlan and ether bridged? Two different hotspots on sepa...

nelson6069

Yes, change the login by to http-pap. That does not require the chap challenge, nor does it encrypt the password. The "split user domain" is for using multiple radius servers, each defined by a domain name. That way "myuser" and "myuser@defaultdomain.com" can use one r...

nelson6069

In my opinion hotspot sheet is not capable for this types of code. You should try any other proxy site. Ninja proxy is on of the best site for this type of code.

how to say?

nelson6069

The hotspot is set to use http-chap in your case. If the client computer does not return the chap challenge with an encrypted password, that is the error you get. Normally that is due to JavaScript disabled. That is required to use the chap challenge sent by the hotspot to encrypt the password. The...

nelson6069

This is a hostel network, if i connect to the access point, and login the hotspot, it will come out this "web browser did not send challenge response (try again, enable JavaScript)", I tried at many computer also have this problem. If I directly connect it thru the cable without going thru...

nelson6069

I have created very good systems doing exactly what you want and possibly more :-) Not sure where your located or if that necessarily matters, but if you drop me a personal message on here I can let you know more detail and find out more about your requirements. i dono how to pm at this forum, plea...

nelson6069

I agree with ronix but if you need urgent help send me an email with your details and i'll send you all my skype and telephone details

emailed already.

nelson6069

If you need a consultant I'm happy to assist. scampbell@campbell.co.nz

Alternatively there may be other consultants closer to you - http://www.mikrotik.com/consultants/

How to PM?

nelson6069

anyone can set this? i can pay for it. My requirement: 1) Load balancing 4 WAN (20Mbps) WAN1: 192.168.1.1 WAN2: 192.168.2.1 WAN3: 192.168.3.1 WAN4: 192.168.4.1 2) Hotspot function 3)User manager 4)Remote access from another place to user manager 5)QOS the network is for students, just slow down the ...

nelson6069

I have key in this code, but it doesn't work. my code is here. is there somethings wrong? / ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=LAN add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.1.255 interface=ISP1 add address=192.168.2.2/24...

nelson6069

CCR1016 not showing User manager?
i had download user manager from mikrotik website, and i had upload it to File, after that i check at System>Pakages, there is no user manager package at there.
Anyone have this problem before?

nelson6069

i'm not going to use firewall, because the network is at hostel and for students. My clients don't let me to block p2p. In order to service 300 P2P using students, and still let them play online games, in 80Mbps, you will likely have to use the mangle rules and queue tree in order to prioritize tra...

nelson6069

All clients students? Really god bless you man... :=)) It depend s on your system .Which packages are working?,firewall?, hotspot? ....etc. everything is affect it.For p2p you should use simple queue and limit p2p traffic.Online games I don't have an idea. http://wiki.mikrotik.com/wiki/TransparentT...

nelson6069

hi,

we have 30mb/30mb int. connection and it's serving at around 220-250 hotspot user with good qos and traffic shaping.

br...

can i know which model you are using? RB1100AH x2? CCR1016-12G?
How many % CPU usage for 220-250 users?

nelson6069

hi, we have 30mb/30mb int. connection and it's serving at around 220-250 hotspot user with good qos and traffic shaping. br... Do you think which method is better for my network? QOS? PCQ? or others method? All my clients are students. Concurrent user will be 300-400 users at night. and they will p...

nelson6069

4 X 20Mbps(DL and UL) connection is enough for 350 users?

any recommendation?

nelson6069

I think this is the router for you. Because we've done some similar projects and the amount of load is somewhat less than that, We don't had problems with this router and the RB1100AHx2 been responsive. But I think to ensure more and the ability to upgrade in the future better use of the CCR1036-12...

nelson6069

is CCR1016-12G able to handle this? the environment is hostel. so i have max 400 concurrent users. i will using this router to do this jobs: 1)Load balancing with 4 X 20Mbps(Download/upload)-dynamic ip address from ISP 2)NAT 3)Qos 4)Hotspot authentication with limited time (all wireless access) 5)DH...

nelson6069

At first I was inclined to reply that 80MBps/5Mbps would be plenty for 350 users in a student environment, then I caught the hostel part and am not so certain. The 80MBps down would probably be acceptable, the 5MBps upload seems rather low. If symmetrical is not required, I would look for download ...

nelson6069

are 10pcs ADSL 8Mbps(DL) 512kbps(UL) enough for 350 students?
i am designing a network for 350 students hostel, are 10pcs ADSL 8Mbps(DL) 512kbps(UL) enough for 350 students using a mikrotik router?

nelson6069

how you do that?

do you use any script?

nelson6069

5 PPPOE clients with PCC method..
anyway to to load balancing with PCC method, if i have 5 PPPOE clients..

mean my mikrotik will have 5 PPPOE clients dial up to ISP..

how to do load balancing?

nelson6069

is there anyway to prevent hotspot hack by my clients?
Specify the "hack" you are talking about. Are they guessing your password? Are they prying your hotspot off the post?

http://www.youtube.com/watch?v=I22NSeutHLM

this is how they bypass mikrotik hotspot.. anyway to prevent this?

nelson6069

is there anyway to prevent hotspot hack by my clients?

this 1 the way i found it online to bypass mikrotik hotspot login..
http://www.youtube.com/watch?v=I22NSeutHLM
anyway to prevent it?

nelson6069

which is more secure? hotspot or pppoe login?
mean cannot hack by user..

nelson6069

i have 400 clients. i want to run DHCP server, PCC load balancing with 4 WAN (20Mbps each), hotspot (400 clients), and also PCQ method.. Can RB450G handle this with 400 cllients? "400 hotspot clients" it is very big number. You need only CCR series router. I`m afraid even RB1100AHx2 can n...

nelson6069

the real question is that 600 active or 600 total users?

Total 600 users, active 400 users...

nelson6069

/ ip firewall mangle add chain=prerouting dst-address=192.168.1.0/24 action=accept in-interface=LAN add chain=prerouting dst-address=192.168.2.0/24 action=accept in-interface=LAN add chain=prerouting in-interface=ISP1 connection-mark=no-mark action=mark-connection \ thanks.. :D , but it works about...

nelson6069

Remove "hotspot=auth" from the rules Add two more rules to exclude hotspot packets from being routed to your ISP. Place these rules before the first "mark-routing" rule. /ip firewall mangle add action=mark-packet chain=output connection-mark=ISP1_conn disabled=no new-packet-mark...

nelson6069

anyone know?

nelson6069

i have 400 clients.
i want to run DHCP server, PCC load balancing with 4 WAN (20Mbps each), hotspot (400 clients), and also PCQ method..
Can RB450G handle this with 400 cllients?

nelson6069

in ip firewall mangle, i add in "hotspot=auth" , but it seen not work with load balancing, but if i delete "hotspot=auth", it works fine with load balancing, but hotspot cannot work, may i know what is the problem? / ip address add address=192.168.0.1/24 network=192.168.0.0 broad...

nelson6069

i had seen the PCQ method, but i am not understand about it.. i want to dynamic Equal Bandwidth to the user, it mean it will automatic arrange the speed of the active user... how can i do it? i had change the "pcq pcq-rate=0", how do the ROS know my incoming bandwidth from ISP so that it c...

nelson6069

Gateway 1 192.168.1.1 Gateway 2 192.168.2.1 LAN 192.168.0.0/24 i cannot access to internet, it can access about 10sec, after that cannot anymore.. here is my setting export # jan/02/1970 00:17:53 by RouterOS 5.20 # software id = 46GL-KATD # /interface ethernet set 0 arp=enabled auto-negotiation=yes ...

nelson6069

may i know where to add this code? hotspot=auth i saw others code, they are using add action=mark-connection chain=prerouting disabled=no dst-address-type=!local hotspot=auth in-interface=LAN new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 but my...

nelson6069

may i know where to add this code? hotspot=auth i saw others code, they are using add action=mark-connection chain=prerouting disabled=no dst-address-type=!local hotspot=auth in-interface=LAN new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=both-addresses-and-ports:2/0 but my ...

nelson6069

PCC load balancing with 5 PPPOE clients login? how use PCC to do load balancing with 5 PPPOE clients login? i am creating PPPOE clients with VLAN.. here is how i create PPPOE clients.. http://www.mikrotik.com.my/setup-for-unifi/ may i know how to use PCC to do load balancing with 5 PPPOE clients lo...

nelson6069

cbrown pointed me to this...

http://wiki.mikrotik.com/wiki/Manual:PCC#Policy_routing

it is work for u?

nelson6069

PCC load balancing with 5 PPPOE clients login? how use PCC to do load balancing with 5 PPPOE clients login? i am creating PPPOE clients with VLAN.. here is how i create PPPOE clients.. http://www.mikrotik.com.my/setup-for-unifi/ may i know how to use PCC to do load balancing with 5 PPPOE clients log...

nelson6069

hi.
please send export fole for me.
but maybe your ethenet port is disable or you have run same dhcp server in one ethernet.

what is fole?

i am new to mikrotik..

and how to export it?

nelson6069

DHCP server not working.. words is red in color..
i had setup DHCP server on ether port, but it will not run, the words become red in color, i try all the port also the same..
i want that port connect to an Access Point, so i want it can be DHCP...
why will like that?

nelson6069

pcc load balancing, how in and out with same ip? im using PCC method to do load balancing, and i have 2 gateway with dynamic ip address. i cannot login to some website due to the ip keep changing between this 2 gateway. how can i set it so that it just will use the same ip to in and out in PCC load ...

nelson6069

can RB1100AH X2 handle 600 hotspot client and do some QoS rules?

nelson6069

may i know it is i use PCC load balancing method and setup hotspot inside the same router, it cannot work properly?

it is i need to separate to 2 router, Router 1 for hotspot, Router 2 for load balancing?

nelson6069

Multi WAN load balancing. can't login to some website. i have problem with load balancing pcc method, after i setup the load balancing, i cannot login to some website which use ip address to login account. because it have 2 gateway, so it will keep changing the ip, so i cannot login to some website,...

nelson6069

how to set hotspot duration (date expire) in user manager?

let's say i want my client can start using the hotspot from 1 Sept 2012 until 15 Oct 2012, starting on 16 oct 2012 12.01am, user cannot use the hotspot anymore..

anyway to do that?

nelson6069

Do you have an interface that is named Local, WAN1, and WAN2? If not then that is a problem. You also don't need to specify the broadcast IP and Network IP manually, that will be calculated by the router internally by specifying the /24 after the IP. By placing them in a console session it should h...

nelson6069

You don't specify what your question or problem that you are running into is. So without that information, no one can help. Why i put in this code, still cannot run? i am using RB450G, and i had reset the device...so it totally don't have any setting on it.. add address=192.168.0.1/24 network=192.1...

nelson6069

it is in the ZIP archive on the download page, called "all packages" can i ask you... Why i put in this code, still cannot run? i am using RB450G, and i had reset the device...so it totally don't have any setting on it.. add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.2...

nelson6069

Why i put in this code, still cannot run? i am using RB450G, and i had reset the device...so it totally don't have any setting on it.. add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local <== is this Eth1 port for local? add address=192.168.1.2/24 network=192.168.1...

nelson6069

may i know where to download user manager?
why i did't see any link to download at http://www.mikrotik.com/download ?

nelson6069

If the cost of radius manager is a concern use Mikrotik's User Manager.

http://wiki.mikrotik.com/wiki/Manual:User_Manager

may i know where to download user manager?
why i did't see any link to download at http://www.mikrotik.com/download ?

nelson6069

You could easily do this with something like Radius Manager.

http://www.dmasoftlab.com/cont/home

but i am giving free service to my clients..

nelson6069

anyway to limit hotspot user just can use for 30days?

mean start from 1st Jan until 31 Jan...

1st of feb, user cannot access again...

nelson6069

Why i put in this code, still cannot run? i am using RB450G, and i had reset the device...so it totally don't have any setting on it.. add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local <== is this Eth1 port for local? add address=192.168.1.2/24 network=192.168.1....

nelson6069

why my RB450 can't connect thru winbox?
i try all port already...

nelson6069

what subnet should i use? i have 1 router, so just have 1 default gateway.. i need 500 usable host, because i have 500 clients.. and this router will connect to 18 access point... can i have different network for every access point, each access point i want 30 useable host.. if the network too big o...

nelson6069

I have one location with 17Mbps internet link, PCC, QoS, netflow (no NAT, L7 or SMTP) and RB1100AH peaks at about 35%. I don't think it would handle 4x more traffic.

i think i just do some hotspot, and set the bandwidth for each user only...

nelson6069

can RB1100AHx2 support 500 clients? 6 WAN will be connected to RB1100AHx2 and each WAN will have 20Mbps bandwidth.. mean all together will have 120Mbps. and i will use RB1100AHx2 to set up a hotspot, and limit each user bandwidth from the hotspot.. can RB1100AHx2 handle this? no firewall... just for...

nelson6069

can mikrotik router dynamic limit user bandwidth base on active user?
let say,
if 1pm have 50 active user using internet, 20Mbps / 50 = 0.4Kbps
4am have 10 user using internet, 20Mbps / 10 = 2Mbps

can mikrotik do like that?

nelson6069

i have 2 ISP, each ISP is 20Mbps internet speed.. and i connect this 2 ISP to mikrotik router, so this network will have 20Mbps + 20Mbps line... and this network have 150 users.. any idea how to set the QoS? i don't want the user using p2p application will use the Full bandwidth then affect the othe...

nelson6069

100 users is not much for this router if they are just general internet users. but so many things can effect The router performance. You mention Hotspot network. How are you planning to implement the Hotspot? are you going to use a radius server for authenticating clients? simple queues or pcq's, W...

nelson6069

100 users is not much for this router if they are just general internet users. but so many things can effect The router performance. You mention Hotspot network. How are you planning to implement the Hotspot? are you going to use a radius server for authenticating clients? simple queues or pcq's, W...

nelson6069

These guys can set that up for you.

http://www.linktechs.net/

how about using mikrotik router?

nelson6069

but maybe one user is just using a chat and does not need 0.33mbps...or maybe he just start up the computer, no internet used. Why would keep 0.33mbps "ocupied"? If there are 30 users with the same "setup"?

any recommendation?

nelson6069

can routerOS able to set QoS like this?
let say i have 20Mbps speed from ISP...

i want the speed 30% for suffering web, 40% for p2p, torrent, and 30% for gamming...

can i do that?

nelson6069

Can RB450G handle 72 clients if doing some QoS and Hotspot?
for the QoS, i just want to limit each user will equally share 20Mbps internet base on active user..
for example, currently 60 user is online, 20Mbps will be equal limit the speed to 0.33Mbps...

Can RB450G handle this?

nelson6069

what are these users doing, and what configuration will you put on the router? if you will have no speed limits and firewall, you can have thousand users. i will use this router as a hotspot, and it will be 70-100 user use it at the same time.. and all this user just use it to online, suffer intern...

nelson6069

I`m using this on a ip base but port base should also be working Ether1 = LAN Ether4 = ISP1 Ether5 = ISP2 I`m not shure how i did it because my wiki is lost But i know some of the steps IP -> routing Create a default route for ISP1 distance 1 and routingmark 2isp1 Create a default route for ISP2 di...

nelson6069

how to use 2 ISP in mikrotik, and i want do some load balancing? i had subscribe 2 line from IPS, each line speed is 20Mbps.. i want connect this 2 line from ISP to mikrotik router, and do some load balancing.. how can i do that? i want port 1-1023 is using WAN 1, and 1024-65535 using WAN 2... or W...

nelson6069

how to use 2 ISP in mikrotik, and i want do some load balancing? i had subscribe 2 line from IPS, each line speed is 20Mbps.. i want connect this 2 line from ISP to mikrotik router, and do some load balancing.. how can i do that? i want port 1-1023 is using WAN 1, and 1024-65535 using WAN 2... or WA...

nelson6069

Speed will be still 20Mbit - it's no difference if you have 100 clients in 1 subnet or 50 subnets. I have 450G and with NAT, only few filter rules and 40 forwards - load is around 45%@20Mbit traffic (game servers - quite small packets). With Full Duplex 20Mbit (totally up to 40Mbit traffic) and mor...

nelson6069

Mikrotik. You should have the APs bridged. If you are going to do QoS you might want to step up to RB1200 or RB1100AH.

if not the speed will slow down?

nelson6069

Yes, but not on the 450G. You are setting up the wireless on the Ubnt. Why would the wireless on the ubiquiti device cause the 450G to be slower?

The 450G is fine for what you need.

the DHCP should set on UBNT or mikrotik?
because i am going to using QoS on mikrotik base on ip or user...

nelson6069

because i heard form someone said that, only 1 can communicate at the same time.. That is only for wireless and this applies to all wireless just not Mikrotik. The radio can only transmit or receive at any given time. If you are not planning on doing any intense QoS the 450G will be just fine. im g...

nelson6069

can 80pc put in same subnet/netwotk? Sure will slow down the speed? The speed of what? the speed of the internet.. because i am connecting 1 line 20Mbps fiber optic provide by our local ISP and connect it to Mikrotik RB450G, and each Ethernet port will connected to 1 UBNT AP-LR access point. so all...

nelson6069

can 80pc put in same subnet/netwotk?
will slow down the speed?

nelson6069

what are these users doing, and what configuration will you put on the router? if you will have no speed limits and firewall, you can have thousand users. i will use this router as a hotspot, and it will be 70-100 user use it at the same time.. and all this user just use it to online, suffer intern...

Search found 203 matches