Quick overview 7.2rc1: (ac2, comparison on the same hw with v6!)
1. Drastic speed drop (200m optics drop to 120m), cpu does not show load
2. Instability (every now and then (say every 10 minutes) the connection drops by a few seconds)
3.Netflow does not work

The same symptoms are on 7.1.1. version.

Yes, dhcp and dns proxy.
Some users p2p,maybe 5 max.
Vpn maybe 5max.

Pure awesomeness ... It works guys!

I just have to test, if everything else works (STB, voip ...).

can u tell , how u implemented?
maybe export from your mikrotik

Planing replace router with mikrotik routerboard.
40 users, all on wire, two lines, 20/20 and 10/5
Which routerboard i need?
How many RAM is enough, and how much CPU?

Yes, correct email. By the way, also make sure your reset command is like this "/system reset no-defaults"

yes, /system reset no-defaults=yes (and keep-users with no and yes, both combination )is executing

Manually rename the interfaces on the new router to the same names as the old router and it should do it. system reset reset-conf this is now clean? rename interfaces, same as rb750 import file failure: such login name already exists please email support, and send us that RSC file that you are usin...

Manually rename the interfaces on the new router to the same names as the old router and it should do it.

system reset
reset-conf
this is now clean?

rename interfaces, same as rb750

import file

failure: such login name already exists

That is the point. After a reset-configuration your new router will be completly clean. Then you import all the config from your old one you got with "/export compact". That way the new router will be a "clone" of the old one. Import after reset-conf - script file loaded succ in...

3.steps

1. /system reset
router is reseting

2. connect via mac with winbox
/import file=name.rsc
failure: ip pool is exist

3.
"/system reset-configuration no-defaults=yes keep-users=yes"

nothing!
no conf at all
import not work, or failure not run script at all

First reset the 751, then connect through MAC winbox and import. On the 751 run "/system reset-configuration no-defaults=yes keep-users=yes" before i go steps your instruction reset(/system reset? ) and import (this report failure ip pool exist, first two step already go through) what &qu...

"/export" - gives complete config with MAC addresses and everything "/export compact" - gives only config that is different from default. Its much shorter, doesn't contain MAC addresses, etc. Use "/export compact" and you can easily "clone" RBs. i want clone ...

you can do this: /system reset run-after-reset="name.rsc" it will clear current config, and then import the one from RB750 dont work reset is reseting router run-after is not work (none conf from name.rsc) when manualy import name.rsc (failure again, ip pool exists), routing conf is not v...

model 750
fw 2.41

model 751g
fw 3.0

testing:
before import, i change ip address to 1.3 (original is 1.2)

and then import
and ip adress stay 1.3

manualy change to original 1.2
but nat is not working ?!?!

OK, in RB750G type "/export compact file=name". Then copy the file "name.rsc" to the other router. In the other router type "/import name.rsc" and see what happens. If nothing works, in RB751 type "/export compact" and paste output here. import return: failur...

sorry but you are not correct. export sets all settings you mentioned, including IP

i have 2 router
750g, working like a charm
and 751g with wifi

i want only to replace router with conf of 750g
and not work

this does give you all that

export is not set router IP

backup and restore not set wan ip route

If you use v5.21, better use command "/export compact file=name" and then "/import name" This will work better

this is not good

i want all configuration, ip of router, admin password, interfaces ,....

I want upgrade hw from RB750 without wifi to RB751 with wireless.
Is ok only backup to file on RB750, and restore from this file on other RB751?

If this not ok, what must do?