[quote]make a bridge. Or plug them all into the same switch and use a single network port with 2 ip addresses. You can use /32 as a subnet mask if you need.[/color][/quote] Dear changeip Are you sure that this bridge connection will get all the bandwidth even if the provider assign this bandwidth in...

Dear sir , If you do not route these packets through those TWO IPS then all the traffic will go to the default gateway directly and in that case only one connection will be active.if your provider manged the bandwidth on IP address then You can not get all the bandwidth from those two links . In my ...

Dear t3rm , Check this configuration as per your requirement . /ip firewall mangle add chain=prerouting action=mark-routing new-routing-mark=http passthrough=no src-port=1024-65535 dst-port=80 protocol=tcp add chain=prerouting action=mark-routing new-routing-mark=other passthrough=n> routing-mark=!h...

Dear t3rm , You can mark your traffic routing into two parts like ... chain=prerouting action=mark-routing new-routing-mark=http passthrough=no src-port=1024-65535 dst-port=80 protocol=tc> and.. other traffic like .. chain=prerouting action=mark-routing new-routing-mark=other passthrough=no protocol...

Dear miahac ,

Pls give me your contact details A.S.A.P


regards
zubair
admin@uttara-online.com

Hi ,

Can anybody tell me that how many active calls can be handled by MT with IP PABX ?



Regards

Actually the provider is not blocking net2phone service. The thing is like , we have been using the AWE4 submarine backbone and the authority of this backbone is The Government of Bangladesh. So as they have declared that VOIP is illigal , they blocked Voip ports. Now recently they have also blocked...

Thanks a lot for your response .

Is there any way to route encrypted net2phone traffic wich will match net2phone carrier ?
My backbone provider blocked the net2phone service and my clients are suffuring .


So if possible please answer .


regards

Can any body help me to configure my MT so that I could encrypt all the voice traffic passing by my MT ? I tried with /ip ipsec , but traffic are not being encrypted . e.g I want all the net2phone traffic from my clients forwared through my MT should be encrypted. I will be waiting for any response ...

I'm facing the same problem . I have also dhcp clients on dsl & wireless clients . Quite often it is heaping like dhcp-lease status shows busy and if I disable and enable it then it goes on waiting status. Anyone know the reason behing the "DHCP_LEASE_STATUS_BUSY ?? Please if there is any s...

hI GWISA, Thanks a lot for your reply , Actually i use individual simple queue for all clients like 180.1.7.X/32 . Because I allot bandwidth to my clients based on their payment . So My question was is there any way to make the proxy traffic delivery on lan speed while using the simple queue rule ? ...

hi guys , while u ppl r arguing with each other ,mean while i have question , I think marking packets according to the wiki is 100% ok and it works as per quee tree rule . I mean the proxy traffic limit in the quee tree rule can deliver the alloted speed or unlimited from the internel cache . that i...

Hi , I have configured the usermanager with pppoe . it is working just fine . now my question is with the quee type . Is there any way to change the default quee type "default-small" in the usermanager for pppoe accounts? I hope i somebody else have noticed it or not , but I would like to ...

want you Guys in Mikrotik to include a feature in usermanger that will allow the creation of credit that will allow login in some special time like say Sun,mon,tue,wed,thur,fridayand sat from 9:00am to 9:00pm daily. Hi all , I am not sure that the mikrotik people are not taking this topic important...

Man , I'm using 6 MT OS with licence level 6 for my six localtion and one of those are using as an accesspoint for my Wireless Links . I have never found anything like MT OS which can be handles so quickly and efficiently I am verymuch satisfied with the system . Now the point is i was in a need to ...

Thanks sergejs, That is possible if there is no other way . But require time to change the different message like Greetings , reminder and require time to forward the traffic for a particular user or a group of users. And on top of everything the system should be something like Sending announcement ...

Hi,

Is it possible to add an event in MT to send any information directly to the client machine even when the uplink goes down . It is very necessary for the support and billing to inform users about any important notice .

Hope our MT Development team will think about it.

Hi all,


Can anybody tell me that how a pppoe user can have an access to see his acoount details like , total used time , session , etc.........by using the usermanager.


Waiting for a positive answer

Thanks To Mikrotik user developer for the ne 2.9.25 version. After upgrading to new versions my MT OS started Working fine. It Is really Great.

Now I need to know how can I make a configure it for my night users ???
Hope anyone can help me.


Thanks Regards
Zubair

Still i'm facing the same problem . I downloded the the 9.24 packege as Ihave instructed and faced the same problem............

How About sending custom popup messages to clients from the user manager ?????


Just an Idea can be added on mikrotik user manager ....

here is MT oS settings [admin@uol.com] > /ppp aaa active export profile secret [admin@uol.com] > /ppp aaa edit export get print set [admin@uol.com] > /ppp aaa print use-radius: yes accounting: yes interim-update: 10s [admin@uol.com] > /ppp profile print Flags: * - default 0 * name="default&quo...

I have activated PAP authentication in the client machine for my pppoe server . I can login into the pppoe server only if I have a secret into the pppoe profile but user manager doesn't show any usage for that account . And if I add any customer from the web interface of user manager then I can't ev...

Now I am able to install the 9.24 package . But still user manager does not show any usage of a user ...............??????????????? [admin@uol.com] > /tool user-manager user print Flags: X - disabled, A - active 0 subscriber=admin username="zubair" password="1234" ip-address=10.1...

First of all , I f I uninstall the 9.23 version of user manager and upload the new 9.24 packege and reboot the router then nothing heappens . I mean router doen’t show any package .I have tried so many times but it didn’t work . After that I was trying with the older package and I have activated PAP...

I don't know am i right or wrong but I have a confusion with the option " credit-till-time=jan/01/1970 00:00:00 credit" How Can I fix it. I did try with system clock setting but date is ok there . Can anybody tell me what is dst option on system clock ? subscriber=admin username="mona...

could u please help me out to work userman with pppoe?