MikroTik

rebel2234

No experience with running in those temps, but my biggest concern would be condensation. Electronics rarely hate being cold, but condensation can destroy them. I currently have switches and RB1100ahx4 running there for years in these conditions, I think adding a small heater would only introduce co...

rebel2234

Hello, I'm inquiring to see if anyone has used a CCR2004 in any cold weather environments as the recommended operating temperature range is -20°C to 60°C. I have a tower site that doesn't have any heat but has a building next to tower where equipment is housed. We can see temps get down to -40°C in ...

rebel2234

We are seeing the same problem with RX drops on a RB1100AHx4. Although the error rate is very low, I am concerned the error rate may go up with traffic. Previous RB1100 AHx2 didn't have this problem. Anybody have an update on this?

Thanks,

rebel2234

Hello, We have been looking at ways to implement DHCP option 82. We would like to run our AP's and Client's in bridge mode to be able to serve a public IP to the end customer. Currently we run Ubiquiti radios for the AP and the CPE and Mikrotik for all the routing, auth and DHCP, with a NAT at the c...

rebel2234

May have answered my own post thanks to >this< post. Added the following code. Checked with one customer and seemed to have fixed the problem will talk to the others. Export: /ip firewall nat add chain=pre-hotspot dst-address-type=!local hotspot=auth add action=return chain=pre-hotspot Print: 1 chai...

rebel2234

Using MAC authentication and RADIUS. They are not being timed out or signed out.

rebel2234

Physical set up is like this. Mikrotik(AP/Hotspot/Transparent proxy unchecked)~~~~~>Customer CPE(bridged)----->Customer Router(public IP, Dmz'd to PS4)------>PlayStation 4 ~~~ = Wireless ---- = Wired What happens is the customers PS4 can sign into the playstaion network fine but when joining online ...

rebel2234

This is typical problem with SQL (and Oracle) accessed over VPN. It does not matter what VPN device you use - MikroTik or anything else. Even if you have high bandwidth. AFAIR the problem is high latency of single packets. Unfortunately there is no simple solution to this. For example: we use Remot...

rebel2234

Hello, I have followed this tutorial http://gregsowell.com/?p=787 to create an IPSEC tunnel between two locations. Each location is on its own subnet (192.168.1.0/24 and 192.168.2.0/24). I can ping remote hosts through the tunnel and even browse file shares remotely. SMB transfers work great can D/L...

rebel2234

I was wanting to know if there is any way via scripts or some other special way to append some characters to the path using Web Proxy in ROS. I see that you can match path patterns but just simply wanting to know if you can append anything to the original path. Example. http://www.google.com/search?...

rebel2234

Has anyone done this with Windows Server 2008 R2? I am having difficulty trying to replicate this in Server 2008. Anybody have a guide on how to do it? Or make a guide on the WIKI on how to do Hotspot AAA with Microsoft Server 2008 "Network Policy Server (NPS)".

rebel2234

I have the following setup. UniFi-----Rb450-----switch-----RB1100-----SonicWall -one SSID on the UniFi is on VLAN 10 other is not on a VLAN -on the rb450 I have static ip set on ether 1, and ports2-5 are on a bridge with eoip tunnel to rb1100 -rb1100 I have bridged ether port 1(switch) to ether port...

rebel2234

Is there any way in RouterOS to give clients ip addresses based on their MAC address using wildcards. For example: Pool_1 - 10.1.1.0/24 Pool_2 - 10.254.254.0/24 00:01:02:**:**:** - from Pool_1 All others from Pool_2 I found a post from 2009 that mentioned it but at that time was not possible other t...

rebel2234

I see this asked about and requested many times in these forums. I am not sure why this could not be implemented in software. Is there some kind of software/hardware limitation that is keeping Mikrotik from building this functionality into their software? Really confused about this.

rebel2234

How about something like this: /ip hotspot walled-garden ip add action=accept disabled=no dst-address=10.0.0.0/22 server='your-hotspot-server-HERE' src-address=10.0.0.0/22 Or if you want this to apply to all of your hotspot servers (incase your running more than one). /ip hotspot walled-garden ip ad...

rebel2234

OK got it, uncheck "transparent proxy" in user profile!

Thanks,

Karma added!

rebel2234

Ok, I am testing this with a default Hotspot setup (10.5.50.1) NAT to a public ip also have tried disabling the 1to1 NAT in hotspot. I have made a user profile and added "NOT_Filtered_Addreses" to Address List for that profile. Changed user that I am testing with to use that profile. I hav...

rebel2234

This is not working, flushed dns on test machine. The rule is showing hits when i try to surf but am still getting open dns responses.

rebel2234

Hello, I want to set up a hot spot that when people log in, by default they use OpenDns (because thats what the DHCP server hands out) but when "elevated" users login, their IP address is added to an address list (via "User profile") and the "elevated" users are instead...

rebel2234

In the mikrotik hotspot (server profile) menu there is an option for "MAC Format". Does this change the format that is sent to the radius server for "User-Name"?

Thanks,

rebel2234

My RB433ah works as well as the RB333 it replaced. I power them with 15v maximum and 10.5v minimum. Doesn't require a diode. Just out of curiosity, why did you choose a 24v solar system over a 12v system? My thoughts exactally! We use 12v everywhere and a voltage stepper like this one (http://www.v...

rebel2234

Official response from support is. "Currently it is not possible to display error on the login page, why MAC-address authentication is failed." So my question is: Is it possible to write a script that pulls the error out of the log of the box and display it to the user? Example: Write a sc...

rebel2234

Also tried it on version 4.6 and 3.18 to no avail.

rebel2234

Here is a snippet of my log. jan/02/1970 00:00:29 wireless,info 00:12:17:95:6E:B6@wlan1: connected jan/02/1970 00:00:31 dhcp,info dhcp2 deassigned 10.11.12.254 from 00:12:17:95:6E:B6 jan/02/1970 00:00:31 dhcp,info dhcp2 assigned 10.11.12.254 to 00:12:17:95:6E:B6 jan/02/1970 00:00:38 hotspot,info,deb...

rebel2234

I just ran a test with Reply-Message using cookies. It is about the same login procedure as using the mac address. If there is an error (I used a bad password in the cookie as a test), my login page displays the Reply-Message ("My message") I entered in the SQL radreply table for that use...

rebel2234

Gave $(radius18) a try and no go... Here is what I did to test. On the default login.html page i changed: This origional line: $(if error)<br /><div style="color: #FF8080; font-size: 9px">$(error)</div>$(endif) To this line to test: $(if radius18)<br /><div style="color: #FF8080; fon...

rebel2234

Gave $(radius18) a try and no go... Here is what I did to test. On the default login.html page i changed: This origional line: $(if error)<br /><div style="color: #FF8080; font-size: 9px">$(error)</div>$(endif) To this line to test: $(if radius18)<br /><div style="color: #FF8080; font...

rebel2234

Found this http://forum.mikrotik.com/viewtopic.php?f=9&t=24599 post and mikrotik staff replied and said they had identified the problem and would be fixxed in version 4.4 and I think this post was written before version 3.30 was released. Was this problem also fixxed in version 3.30?

Thanks,

rebel2234

I've looked at the page and after messing around with it for a while I am beginning to wounder if i got the syntax right. This is what I am using: $(radius<Reply-Message>) As I am looking to display what the "Reply-Message" is, sent from the radius server. Anyone steer me in the right dire...

rebel2234

Currently we are using Hotspot to Auth users against a Radius server (Emerald 5) via MAC address and a common password. The problem I am having is when a customer gets the splash page (meaning they are not authenticated) i want the splash page to show what the radius reply was (ie the reason they ar...

rebel2234

That was it... Sorry am a newb to mikrotik. DFS mode set to "no radar detect" by default

Thank You!

rebel2234

I have a PTP link running 29miles with Nstream and setting the ap side to 5765 and client side to the same I look in the status and it tells me that it is running in 5180 on two rb433ah's can anyone exlpain this?

rebel2234

We have put ROS-3.27 on a couple of x86 machines with 1GB CF cards. I have noticed that it hangs for a while ROS is doing a disk integrity check... Can this be disabled?

Thanks,

rebel2234

After replacing a wireless card in an x86 machine running ROS-3.27 the table for that wireless interface is reset to default. How do I keep this from happening? Sorry for the Newb question.

rebel2234

StarOS does compression with WEP.... Not sure about WPA and such.

rebel2234

Sorry, I am new to Mikrotik. I assumed that would be a standard with all of mikrotik's stuff (after testing their x-86 demo software). Yes I know somone is going to probably going to ring in with "RTFM" so, my bad. IMO having atheros drivers without the compression is like ham without burg...

rebel2234

Can this be made a feature request?

rebel2234

*Bump* Can I put a different wireless package on the board to get it to do compression? Upgrade the license? It just seems silly that with all the bells and whisles that Mikrotik has there is no compression for atheros chipsets on the RB4XX series of boards. Can any of the Mikrotik techs ring in her...

rebel2234

http://www.atheros.com/news/Performance.html -says hardware compression there. http://www.ubnt.com/products/rs.php -This board uses the same CPU as 433AH I know it will do compression. http://www.ubnt.com/products/ls2.php -This board uses a much smaller (180mhz) Atheros MIPS processor it will do com...

rebel2234

yeah that sounds a little odd... why would the routerboard matter? Isnt compression handled within the card itself?

Yes Hardware compression is handled by the card. We see a ton of benefits from using super A/G on our network. Not having it will turn us away.

rebel2234

So, what boards support the compression? I am new to Mikrotik and we are thinking of switching to Mikrotik from another embedded software company because of lack of features and might still yet be looking for another company. IMO not having atheros super A/G on some platforms and having it on others...

rebel2234

Board: RB433AH OS: ROS 3.20 Cards: 2x Ubiquiti XR5's I cannot for the life of me find where to enable compression on these cards any where in the GUI. I know the XR5's are a Super A card. I have even tried from the console "/interface wireless set wlan1 compression=yes" and compression is ...

rebel2234

I would say with the 00:15:6D mac prefix on the card it is indeed a UBNT card.

Nstreme enabled!!!
Big!

Are you running a UBNT card... SR71-A?
Link distance?
Number of antennas: x2 or x3?

rebel2234

We are thinking of offerering a service with bonding to our customers. Here is the question. Say we are running MT for both AP and client and on the AP side of things we run 2 Radios and on the client side we run either 1 or 2 radios (depending on wheather or not the client wants bonding for extra s...

Search found 44 matches