On my CRS running 6.12, if I enter this code: /interface ethernet switch ingress-vlan-translation add ports=ether2 customer-vid=0 new-customer-vid=8 sa-learning=yes /interface ethernet switch egress-vlan-translation add customer-vid=8 new-customer-vid=0 ports=ether2 The ether2 port will correctly w...

Tip: don't clone your mac address. It's not needed for the setup to work, and it will for sure disturb your network if the ISP modem is also still somewhere in the network for some reason. This because you will have twice the same mac in your network, and that should never happen in any network. I w...

I can confirm, the RB2011 is not available ANYWHERE in Western Europe. No stock in Germany, UK, Netherlands .... for many weeks now.
This can't be a 'ask your distributor' type of situation.

Please MikroTik, give us some information. We like your product, we want to buy them.

What's wrong?

Today I was checking the NAT connections on a simple setup I use. The setup is fairly simple. A PPPoE connection to the internet, a local-bridge interface to the inside network (192.168.x.x). NAT is in between: /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat acti...