Just create a new queue rule for target 192.168.168.168/32 with unlimited bandwidth. Place this new rule above the 192.168.0.0/16 rule. / queue simple add name="gateway" target-addresses=192.168.168.168/32 dst-address=0.0.0.0/0 \ interface=all parent=none direction=both priority=8 \ queue=...

There is jet another way. / ip firewall filter add chain=forward action=drop src-address=x.x.x.x \ src-mac-address=!yy:yy:yy:yy:yy:yy comment="" disabled=no / ip firewall filter add chain=forward action=drop src-address=!x.x.x.x \ src-mac-address=yy:yy:yy:yy:yy:yy comment="" disa...

No! Problem not yet solved. I sent support request to mikrotik and I am yet to receive any response from them.

I have the same problem! My RB532 with R52 card and 5.7-5.8Ghz, 13dbi omni does not function at 5.7-5.8Ghz but works at 2.4Ghz range. These are new equipment freshly order directly from MikroTik.

See http://forum.mikrotik.com/viewtopic.php?t=10466 for details

I installed a new RB532 with 5.8Ghz, 13dbi omni on a 90ft mast. The radio was configured as AP-Bridge as follows. name="wlan1" mtu=1500 mac-address=00:0C:42:0C:15:75 arp=enabled disable-running-check=no interface-type=Atheros AR5413 radio-name="GCCL-BASE" mode=ap-bridge ssid=&quo...

Mangle DNS as follows: / ip firewall mangle add chain=prerouting protocol=udp dst-port=53 action=mark-connection \ new-connection-mark=dns-con passthrough=yes comment="dns-con" disabled=no add chain=prerouting connection-mark=dns-con action=mark-packet \ new-packet-mark=dns-packets passthr...

change the 'www' service port in 'ip service' menu from 80 to something else, i.e. 808. You can then access at router-ipaddress:808