corrcted client configuraiton to use ppp secret in user authantication password

still same.

Probably you have also tried to use l2tp secret in ios configuration, or other ios misconfiguration.

thx for the response @mrz removed, but still can't connect. log: https://d1zjcuqflbd5k.cloudfront.net/files/acc_541482/ZYhJ?response-content-disposition=inline;%20filename=Screen%20Shot%202017-01-19%20at%202.34.43%20PM.png&Expires=1484830101&Signature=Wn0jdWOkupEPhWrSxl1nY0Xs3y9NBcMa5C6zyUPC...

still not able to get this right.... anyone ideas ? Using routerOS 6.37.3 IOS 10.2 macOS 10.11.6 RouterOS Configuration: [dbld@OmeTik_RB] > /interface l2tp-server server print enabled: yes max-mtu: 1450 max-mru: 1450 mrru: disabled authentication: mschap2 keepalive-timeout: 30 max-sessions: unlimite...

Using routerOS 6.37.3 IOS 10.2 macOS 10.11.6 RouterOS Configuration: [dbld@OmeTik_RB] > /interface l2tp-server server print enabled: yes max-mtu: 1450 max-mru: 1450 mrru: disabled authentication: mschap2 keepalive-timeout: 30 max-sessions: unlimited default-profile: profile1 use-ipsec: yes ipsec-sec...

I've been trying to understand what could be limiting rsync speed with external server via my RB 750. As far as I can tell tree are no queues or other bandwidth limitations defined. But it looks like my rsync traffic with the internet is limited to ~50-120kBits per second. I've tested outside connec...

Hi, I'm experiencing very weird behaviour with my RouterBoard, in essence problem manifests itself as follows. I've set up the PPPoE Client to establish my ADSL connection via ethernet port attached ADSL modem, but this way speed I'm getting over this ADSL connection are restricted and very inconsis...

I don't see it on compatibility list but it is still hope. If you plug it into your Mikrotik router (I assume you own a model with USB port or x86 machine), does it create a ppp-out interface automatically? If you check /system routerboard usb, do you see the device listed? What kind of RoS version...

Are you trying to use your Huawei E5331 MiFi device as a 3G modem interface for your Routerboard?

Is this possible at all?
To use Huawei E5331 MiFi device as a 3G modem interface for the Mikrotik Routerboard?

Trying to understand conceptually and practicaly how to use Mikrotik router [RB751G] to loadbalance and have failover over 3 different types of connection. First would be static route to a gateway [Radio], second would be PPPoE ADSL connection managed by the Migrotik RB and lastly 3G modem pluged to...

Hi cbrown I have following setup : RB751G this connects via one Ethernet port to physical network on which two internet connections are available 1) ADSL modem [Here I use PPPOE on MT RB to establish connection/interface] 2) Static IP router [For this I simply have static route defined] Simple fail ...