Schreibe mir sehr gerne in ner Privatmail, da die Forumsprache leider Englisch ist.

Ich helfe auf Deutsch und schreibe auch rel. zügig zurück

VG

I want to ask my tricky question to you professionals ;) Am I able to connect 2 routerboards in two neighboring valleys or do they need immediate "sight contact"? As I figured by myself: I want to connect two houses with an airline of approx 4 Kilometers by MicroTik WiFi, but some friend o...

Unfortunately I was not able to establish a VPN Connection to IPVanish or similar VPN Provider... That drive me nuts ;) I have also done the manual for Open VPN, but was not able to establish a connection. What it should do is: Establish connection to IPVanish ->Nice to have is a "Dial Plan&quo...

Hi you lot, I´ve got a Problem while trying around with my Routerboard. First of all: Everything is fine and work as desired. But I want something special on my Routerboard: Routing of all http (80 only) to a VPN Provider. Tool of choice is IPVanish. I have an account by them and want to use this se...

Ok, I will install it later and try - it seems new is not even better - so what on VoIP. Do I need to forward traffic from outside to sip appliance, i.e. some DMZ work? Tried it, but it didn´t solved the VoIP problem.

I forgot to tell: Because the RouterOS rely to linux, I guessed that it could be programmed - in the most things - like linux. I tried many things the whole night, so I see the following things as a problem: So first I can´t understand/see, why IGMP Proxy won´t work as suggested. With alternate subn...

I see a DHCP Server assigned to interface "IPTV Network" but no sign of an IP address assigned to that interface which is most likely why the DHCP Server is flagged invalid. Solution - add a valid IP address to interface "IPTV Network"! Thanks, now, the DHCP Server works great, ...

It looks as if you do not have a valid IP on the interface that the second DHCP server is attached to thus the DHCP server will show invalid. so where i´m wrong in the config? What have to be configured, that the things I listet above will work? i´m driving crazy, ´cause I can´t see what´s wrong......

So, now I really get grey hairs... I have tried at least everything I found on Forum and on the Wiki, but the things I want to realize just doesn´t work. But first, look at my actual config: MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK ...

Now, here is my actual config: [admin@TKGN01LTB01R01] > /export compact # jan/01/2002 02:22:35 by RouterOS 6.0rc7 # software id = 26CV-WFXI # /interface bridge add name="IPTV Network" protocol-mode=rstp add admin-mac=D4:CA:6D:85:9A:D1 auto-mac=no l2mtu=1598 name=bridge-local \ protocol-mod...

Can you confirm whether your VDSL modem is in bridge mode - or are you double NATing? Ja, the VDSL Modem is in bridge mode, without NAT. It´s management Interface is reachable through 192.168.10.250, connected to eth1 which is configured as 192.168.10.1/24 and provide vlan 7&8 also for internet...

Also, i have had an issue when changing the default lan to something different, i get no internet. Found out that i needed to get rid of the static DNS which stays as 192.168.88.1.. Once i remove that i get internet access. Hope this helps yeah, same at me. Also the DHCP Server has served that DNS ...

................ For that, I have Set Up an DHCP Server for serving also this network, but it shows up red and won´t work. So what have to be done to get this thing realized? Thanks in advance Make sure that the interface has a valid IP number on it. If it doesn't the DHCP server will be flagged in...

Look in the IGMP Proxy settings under interfaces. On that upstream interface add 0.0.0.0/0 as an alternative subnet - you will see a place for that entry. I am suggesting this because you don't know what addresses the IPTV provider will be streaming from yet... OK, done. This will work. But what ab...

On the IGMP proxy upstream interface temporarily add 0.0.0.0/0 under alternate subnets since there is a good chance that the servers are not on the same subnet. Once you see where the traffic comes from you can provide suitable limits. adding subnet on the igmp proxy? as configured on eth1 the vlan...

From your config it looks as if the PPPoE client "VDSL MediaNet Dial" uses VLAN7. The VLAN is just defining the broadcast domain for the PPPoE connection. It is the PPPoE client which will ultimately carry your local LAN subnet traffic to the ISP so it is the PPPoE client interface "...

does it mean, that I have to chance the 0.0.0.0 to 0.0.0.0/0 or what is the deal? The other Masquerade is for fibre connector, I have no sfp, so I have deaktivated the port. I think that you must have selected source NAT on that rule at some point thus the to-addresses setting appeared. I don't thi...

add action=masquerade chain=srcnat comment="default configuration" \ out-interface="VDSL Modem Uplink" to-addresses= 0.0.0.0 Before looking at anything else could you get rid of the 0.0.0.0 . 0.0.0.0/0 and 0.0.0 are not the same thing. Note that your other masquerade has no to-a...

So, now there is my config export: MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK...

I see... will post the output tommorow, ´cause the router is not locate on my site. Also I have forgot some explanations: IPTV (vlan8) is routed with IGMP Proxy and should be from there be routet to wlan and 2 Interfaces on device in a other vlan, ´cause otherwise there could occour multicast storms...

Hi there, I need some help on configuring my RB2011 19" Mikrotik device. Software is 5.22 I would connect my All IP Broadband Internet to my local lan, but this woulnd work proberly. So what I have/Specials: T-Home All IP VDSL 50/10. Special on that is, that pppoe dial in is vlan 7 tagged and t...

Hi there, now i´m on business with Mikrotik, as for me it is the best routing devices on the Market. So, I am new to this subject and want to set up my 3 devices. The situation is: Site 1: VDSL 50/10 Mbit MikroTik RB2011UAS-RM 19" Rackmount Site 2: Cable 50/2,5 Mbit MikroTik RB751G-2HnD Sub Sit...