I have had good success using RADIUS to accomplish this. You could also set an access list rule with an AP and Client Tx limit for each modem. Double click on any registered client and click "copy to access list". Open the access list rule and set your AP and Client limit. You will need to...

I have a few Groove A2Hn and Metal 2SHPn AP's installed with about 5-15 customers on each. I have had the Rx level suddenly drop for all customers. I now have six AP's that I have had to replace. Some sites have been replaced multiple times. I do not believe it to be a CPE side problem as it happens...

I have done some testing recently with 10GbE on RouterOS. (pictures hopefully attached). network-diagram.png bandwidth-uni-directional.png bandwidth-bi-directional2.png A very simple routed network between the two test machines. I was using a small Athlon 3GHz dual core with 2gigs of RAM. The 10GbE ...

I have seen this issue with both PTP and PMP links. The PTMP only stops on my OmniTik with 15 SXT CPE's. My other PTMP systems (RB711GA-5HnD's) have never had issues. PTP links over SXT's are the only problem units with my PTP links using RB711's do not have issues. Sounds like a fix is being worked...

I have also had this problem on a pair of SXT's and with all clients (about 15) on an OmniTik. I did the same thing you did with forcing the remote side to re-register - data starts moving after that. This happens very random from twice per day to once every two months. I am using NV2 and version 5....