Nope, trying to detect architecture-name such as arm, arm64, tile, mipsbe, hence which routeros file is needed to upgrade them. From cli you can run /system resource get architecture-name and it will respond with devices correct architecture-name but under CAPsMAN I have not found a way to detect ar...

Attempting to detect architecture-name of the remote CAPs either from the CAPsMAN or WiFiWave2 equivalent screen. in process of updating a script that goes out and downloads the correct upgrade files from an internal server for both the Router and the needs of the CAPsMAN/WiFiWave2 CAPS's but can no...

Have a CCR1009-7G running 7.10.1 running as Wave2 CAPsMAN for 2 x cAPGi-5HaxD2HaxD (7.10.1 as well) but about every 72 hours the cAPGI's drop WiFi connections and IOS/Andriod or Printers start prompting invalid password or other errors, A quick reboot of the cAPGi's causes everything to return to no...

Freshly installed CHR 7.10.1 running P10 License on Rocky LInux 9 with KVM and OpenVSwitch Networking, having performance and auto-negotiation issues. Reason for OpenVSwitch is system is hosted in 3rd Party Data Center and need to separate WAN from LAN Traffic, both are setup in bridge mode. br-ex: ...

You are both correct as support came back with the same answer, wifiwave2 is part of the extra packages when upgrading/downgrading via custom scripts, manual upgrade or downgrade paths and needs to be added just like the base routeros npk file, so now off to modify the custom upgrade scripts to watc...

As I normally do applied settings specific to customer location, and tested everything then attempted to upgrade from 7.6 arm64 to latest 7.9 arm64 and wireless interfaces are gone. Tried downgrading back to 7.6, factory defaulting router, restored original backup but nothing and as shown below /int...

Have been able to successfully create an IPsec tunnel between a Mikrotik CCR1009 running v7.6 and a Sonicwall NSV270 running SonicOS7. The only odd issue still happening is a daily timeout of the IPsec tunnel. If you go under Active Peers it shows the tunnel connected but numeric values are not chan...

So the CCR1009-8G-1S-1S+ (7.6) that was effected by the reboots has been stable since yesterday around 1:15pm PST, I don't know if this is related or not but I noticed the ipv4 address of "36.156.28.131" attempting all types of connections with the router before I blocked it a short time l...

You can add another CCR1009-8G-1S-1S+ to the list, upgraded from 6.49.7 to 7.6 about two weeks ago and all the sudden today it has rebooted about 3 times in a 12 hour period. The CCR226's running 7.6 connected to same ups haven't rebooted at all. Tool/Profile shows very little usage currently last r...

We have a couple of virtual host running in different public data centers, the virtualization host are running Rocky Linux 8.x with KVM and the primary nic card is a 10Gbps SFP connection bridged via openvswitch between host and CHR image and presented as "ether2". Additional the virtual m...

I have several CCR and other series routers running on different carriers and as part of a general bad traffic drop I have several lines at the start of the firewall which drop traffic if they match an ip address listed in source or destination list. I have noticed over the last several days adding ...

@Zerobyte, can you provide an example of what you mean? If I turn Nat Masquerade off on the Carrier Router nothing from the Tenant Router can access the outside world. No matter what I try I cannot seem to preserve the Static IP passthrough from the Tenant Router via the Carrier Router to the outsid...

@pukkita based on information you provided the inbound side of the traffic is working great. However I am having trouble with the outbound side of the traffic if I don't have a srcnat "masquerade" in place no outbound traffic from either Tenant Router can proceed out but this doesn't allow...

Forgot to Mention running 6.34.3 on all Routers.

Here's the Diagram, using 172.16.X.X address to preserve the full Static IP Blocks for the Tenants.

Looking for a little help in setting up a CCR1016-12S-1S+ for Multi-Tenant Routing. We are having a new Fiber Internet Circuit installed and the Carrier provided a /30 WAN IP Range and both a /28 and /29 Public Static IP Range. I have the CCR configured with the WAN Interface Address and utilizing a...

Not sure where to post this, so I figured I would start here. We have recently seen a price spike (California, US) in Broadband Fiber Carrier Pricing and where offered an alternative via ATT/ACC for Non-MIS Fiber Internet 150/150Mbps the catch being we have to provide both the Customer Router and th...