Hello!

The recent ipv6 package handles ipv6 multicast in same router with different subnets?

ffx(5,8,E)::x and RP embedded don't work for me.

Thanks.

also what router model you have?

a RB751U-2HnD

Hello, the router works ok a couple of days and now the leds of ethernet, the pwr and act is all on and static

put the power on rb and the leds on.



any solution?

Hello, how to solve this with one router?

qinq VLANs (one by client) + DHCP + Point to Point IP.

the scenario is for q-in-q tunnel clients in ISP

thanks.

That is the way how is made now but do not work! grrrrrrr Please check screen shots in upper post. I tried to bridge all together on TV side vlan10 ethport5-tv and ethport3-lan and we will see thanx hmmmm, eoip tunnel as janisk says without vlans, or check your wireless link WDS option (in both dev...

i use with wine in mac and works OK

check your mac

That was made all ready. On modem side is traffic on vlan but on TV side is no traffic from RB on modem side to vlan TV side. I have screen shots what I'm doing wrong??? modem side settings: http://beta.makina.org/andrej/rb2011_modem_side.jpg tv side settings: http://beta.makina.org/andrej/rb_951_t...

Thank you for answer but please can you be a little more specific I'm learning Mikrotik. I made VLAN by that document http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment but there is no data through. What im doing wrong? Bye, Andrej Ok airblade, create a vlan in the interface to interconect...

thanks, maybe im missing something, but i think i have to do the tunnel over ipv4 because ipv6 (tunelbroker) is VERY slow at home, thats why my idea was to use the ipv6 tunnel from work the problem is broke the tunnel in your home. you can try to setup a EOIP tunnel in both mikrotiks in ipv4 and re...

/64 is minimum length that can be assigned to the customer. However i have not seen any issues in RouterOS if less than that is allowed. DHCP-PD even allows prefix length of 64 to be distributed to clients with pool length of 64 (that is DHCP-PD can give out only 1 prefix to PD client) yes janisk, ...

ahmn okk, drastic solution, you can use blacklists.

filter packets to detect and add ips to firewall address list with action ADD DST TO ADDRESS LIST, and add a filter rule to drop packets.

a similar example http://forum.mikrotik.com/viewtopic.php?f=13&t=54199

No manual :) you can use for the vlan dhcp servers, and for pppoe a pool, is auto. the more secure solution is pppoe with different user and password by 400pc. or tunnel L2TP or other other way is get the mac of all pcs and filter... mac ACL, easy to hack, put the same mac of other pc, plug cable an...

Java... python.. perl...
I prefeer hacks then java, java sucks...

vortex you can do a new GUI with Mikrotik API

congratulations vortex multicast works ok :lol: 1 if you use different ports for different subnets in you routerboard, with independent switches or hubs to connect your pcs you can add in firewall drop multicast from printer subnet. 2 if you have a hub or switch interconnecting all subnets.. you are...

very easy, remove the ip->address from the pppoe clients input interface. the router not routes if not have address. pppoe create a "ip tunnel" by user, independtly of address of interface, is other layer.

with pppoe mikrotik recommends put the arp of interface to proxy-arp

S-85DLC05D is ethernet 1000BASE-SX?

If the rb450 is the client of dlink... remove all addresses from ip->address, put you rb450 all interfaces (eth & wireless) in a bridge to get all from dlink. if you use winbox with MAC address this is not necessary... put in the new bridge interface an address of same range of dlink or go to ip...

HEHEH

is located in the back, in the semi-pyramid of dots have in the lower left a zone without dots and have a rectagle, is the reset.

congratulations!

if you have 2 independent (ipv4 only) lines to internet, and in work have sixxs tunnel to do IPv6... the most logically is make a other tunnel IPv6 in home to do a IPv6 tunnel with the ip of work. the schema is: work->mytunel->work_router->tunnel->tunnelbroker->internet<-tunnelbroker<-tunnel<-home_r...

No require wind$%·$" I use ubuntu with winbox. winbox is "native" works well with wine, mono is mid layer libraries, muuchhhh much more processor cicles to do the same. to change the code i prefeer winbox writed in c or c++ with wxwidgets, more multiplatform native ligthweight possibl...

Easy, do VLAN with iptv port X (tag all packets input in rb switch port X), activate in wifi wds, read this vlan in near tv router.

you can change ttl of packets with mangle

Have DHCP configuration??

to center in you problem go to tools -> ping do a ping from router to 8.8.8.8 for example

if not response, check this, PPPoE add default route checkbox on.

if yes, configure dhcp server, ip, dhcp server, dhcp setup.

I recommend remove address from routerboard interface and go to lower layers:

1 VLAN from pc client to router, and for more security, static ip as link, same as pppoe
2 PPPoE from pc with username and passwd to access

The error is in a cisco linksys E1200 (have last firmware Ver.2.0.04 (Build 1)) all ipv6 in auto in exactly 5 minutes downs the ipv6, only globals ip :shock: any relevance the 300 seconds timeout with ND in mikrotik? Update :!: The solution for E1200 is put less of /64 prefix in pool, example: /62, ...

Yep cupis, v6 no have ARP the thread is http://forum.mikrotik.com/viewtopic.php?f=2&t=54200 3rd post talks about the "same" About the discovery, the multicast packets pass ok, all devices are ok, ip, route, dns... ping directly from client to mikrotik not possible but the interface vla...

Hello, I have problem with IPv6 and VLANs (in a port direct to other group of pcs works always ok). In this case, is a VLANs in a bonding and vlan ARP reply-only, i read in the forum some problems in older versions with ARP in reply-only mode with IPv6. I set all VLAN ARP to enabled and the result i...