Hi experts, I have a problem. I'd like to let in to the Mikrotik from public side any web requests, exactly behind the Mikrotik. If I make a dst-nat to server (port TCP80), works fine. But I'd like to work with two different servers via DNS... In my example (above) is an Asure VMS architect (its wor...

Is anybody knows what package do I need to Netinstall? I would be thankful for a direct link.

I've been tried the netinstall - I made like this at first time... (After many try and two computer) The router could connected to the netinstall app. I downloaded many pack and installer (6.49 & 6.48.5 too).. When I choose (RBwAPG-5HacT2HnD) the router the package window gose to empty. https://...

I'v been tried to shortly while powered on... 10 secs, it was blinking (the LEDs of 5ghz and 2ghz) rapidly.
tried to press wile booting up same shortly blinking the wlan LEDs.

But same sympthome..

But is younger then 6 months...

Ps. Thre are 5 LEDs.
Green ones: 5ghz, 2ghz, eth, caps, pwr

Not ... only sw upgrade (from quick setup)

Hi, my router after update rebooting after 10 seconds... after a few blink of eth...
I triede to reset /30 seconds pressing wile power on... it blink wlan1&wlan2 ... I think made the reset...

But nothing... what can I do?

Same situation, I can not touch all of my VPN...

I bought a brand new AP... I Can not conetct (first time) to set up the router. The winbox can not see as 'Naighbor'.... I plug it directly into the computer. While I connect it into the working infrastructure get IP addres from dhcp... (on ETH port).. But can not connect any way (winbox, webrowser,...

Cancel the order by all means.

I think I won't be able to... I'll try to sell th 2011.
But thanks for your answer!!

Thanks Guys,

I think My ISP is gone bad. At the easter fesitvs it worked around 70-80Mbps...
Unfortunately I ordered a MikroTik RB2011iL-IN.... Looks like the problem is not with the 433 (without Gigabit Eth)

I have an RB433 AH routerboard... My internet connection speed provide 100mbps. But I speedtest 40mbps show. The fastrack enabled, not better when turn off any firewall rules (without the fasttrack). I use the eth1 for the ISP. The Ip Settings IPv4 Fasttrack Active but Bytes Packet 0. In theFilter r...

Sure you can. And establish port forwarding (port 53, protocols both TCP and UDP, forwarded to the server you'll use as NS). Well done...Thanks. Some problem escalated... I installed a Bind9 and configured... As I set up the Bind9 NS server ip into my DNS list (fe.: DHCP or manualy) In my local net...

Tank You "mkx"!

May I install NS behind Mikrotik? (for this plan)

I have a RB433AH router. My network has fix IP (from ISP) A make a sub-domain (fe. sub.mydomain.com) in my domain provider... It works fine I tried from tracert (from outside my network) The domain is alive (tracert above): Tracing route to sub.mydomain.com [ip myaddress] 1 38 ms * 1 ms router.lan [...

Thanks!

Could it work? :
I use two different port between the domain provider and mikrotik. forexample 81 port for the web1 and 82 for th web2... after then I'll set it up in the nat. 81 -> 10.0.0.1:80 && 82-> 10.0.0.2:80

Hy there! RB433AH - I have two web server in my network... Their FQDN registered in a domain provider. Let say example.com... The subdomains are web1.example.com and web2.example.com... Both of them forwarded to my network public ip address by me in ISP manager of my provider. In /ip/DNS as static r...

Every where I read about Mikrotik VLAN read that it must be work. Don't forget that aspect I use everytime(!) a Hyper-V virtualized Win8.1 Well I look for the other end: http://blogs.technet.com/b/chrad/archive/2009/06/24/buzz-getting-vlan-trunking-working-with-hyper-v.aspx Tomorrow I go there, and ...

I used the simpliest way from the Mikrotik viki... /interface vlan add name=VLAN2 vlan-id=2 interface=Eth1 disabled=no /ip address add address=10.10.20.1/24 interface=VLAN2 Maybe the problem is: All of my trying are on virtual server? I Use a virtual server (Hyper-V) this phisical lan address is 192...

ohh sorry it was too early... I have two port in the Mikrotik OS PC One of the WAN (internet connection) and one of the Eth1 (ethernet) I have two IP address (192.168.1.100 and 192.168.10.1) on the Eth1. Beacause The 192.168.1.0/24 clients use static ip, they connectint into a DC (SBS2011)... In sam...

How can It? I dont know what is in your mind...

Sorry if this question was.... I have router os v 6.7 I have an MS SBS with DHCP and i need an other via Mikrotik... I used and configured a simple DHCP on my MikrotikOS. But I can not onto the VLAN interface.... The firs try: I use simple vlan interface via Ether1 /ip address> print Flags: X - disa...

/ip proxy enabled: yes src-address: 0.0.0.0 port: 8085 parent-proxy: 0.0.0.0 parent-proxy-port: 0 cache-administrator: Admin max-cache-size: 10485760KiB cache-on-disk: yes max-client-connections: 600 max-server-connections: 600 max-fresh-time: 3d serialize-connections: yes always-from-cache: no cac...