Dear friends, I've a 4G LTE connection. Near and in LOS to BTS I can reach 50 / 20 speed. When I connect the pc to ZTE MF90+ 4G Router over usb or wifi I've good LTE speed, from 15-20 down / 5-8 up . When I connect the ZTE MF90+ 4G to RB 951UI 2HnD I can't reach more then 5 down / 2 up Mbit. I did s...

Hello there, I have new RB2011s which will be installed on our locations from technicians. They do only installations of equipments but they do not configure. I want to access the 2011 terminal connecting from the office using 3G or GPRS Internet so I can issue the first commands, in particular assi...

Hello there, I much tried to find a solution but I could not. What is the correct way to : 1) calling from a GSM / UMTS device the USB modem connected to a 2011 usb 2) send command to the console such as telnet I want to remote control the RB2011 as they are freshly installed on the mountain without...

There should be new product from mikrotik : netbox

http://www.interprojekt.com.pl/mikrotik ... -1624.html

Two of these with mAnt Antenna and Flexguide should be the ideal.

Monday I'll ask availability date

Dear friend, I open this topic to discuss with yourselves about 802.11ac standard on Mikrotik. I'm waiting in about 3 estimated weeks my Compex 802.11ac QC 9882 chipset mini-pciExpress cards. Then I will install them into 2 912 OUT boards connected to Mikrotik MAnt antenna and will start the test on...

I asked support to Mikrotik 12 days ago and no reply still

Hello you're right. But I want to keep the subnet on both router. I've seen on several example that this is possibile. This is the reason I used exactly EOIP. I assigned the IP to the bridge. The problem seems to be a missing connection between the 2 eoip connection. There is no firewall rule so tha...

Hello again,

yes, what you tell is mainly correct about routing.

But EOIP has the goal to " bridge " the network like if it is a cable or a switch.

This way infact allows to have the same subnet on several different routers.

Any solution ?

Regards

Marco

Hello there, I've 2 RB750 routers with 5.24. Both connect to a PPPOE Server. They have so both on pppoe interface ( eth3 ) the addresses 10.0.0.2 and 10.0.0.3 They ping each one the others without problems. I tried to do EOIP connection between them. The 1st calls 10.0.0.3 and the 2nd calls 10.0.0.2...