So I am guessing no one has similar problems or know how to troubleshoot or solve it?

I recently started to see a high packet loss on my router. I reset the router and started from scratch, upgrade boot and packages. Still the same issue. It seems to be between the outgoing interface and next hop (my ISP). I have tried just plugging my computer in the outlet and it works flawlessly. ...

I don't know if this is a mikrotik problem or proxmox problem. I use RB2011UAS as a router, dhcp, dns, etc, etc.. The RB750GL mainly just as a tap.. I have a VM-host with two network interfaces. Interfaces (eth0) is connected to a netgear router which then is connected to the ether2 on the RB750GL. ...

/interface ethernet switch> print Flags: I - invalid # NAME TYPE MIRROR-SOURCE MIRROR-TARGET SWITCH-ALL-PORTS 0 switch1 Atheros-8327 ether2 ether5 Will that suffice? :)

ohh, that's more than I knew, thanks a lot, will test it as soon as I get home.

Thanks a bunch : )

I am not currently at my device, but when I tried pushing it, the only thing that happened was that it changed between kbs and pps. nothing else.

Does it have multiple touch areas or only one?

I am using a RB2011UAS-2HND-IN as a router / gateway, connected to that one I have a RB750GL which I would want to run port mirroring on. ether2 goes from the RB2011 and ether3 goes to the LAN network while ether5 is suppose to be where I recieve copies of all packages sent to and from ether2. I hav...

I am using the RB2011UAS-2HND-IN and would like to change the port showing in the LCD-menu from the "sfp1-gateway" to "ether1-gateway" When I enter the CLI, all I can do is the following /lcd> edit backlight-timeout enabled value-name wheras the documentation says it should have ...

Awesome, that's exactly what I was looking for.

Thanks a lot!

Thanks a lot. The nat works great. I will have to test the script later on, I'll have to add all the ports I need first and then I'll add the script to test if it will work. I think it would be better if you could set "dst-interface" or something instead of "dst-address" as that ...

I know this topic has been up a lot in this forum, I've read about 10-15 different threads about it, also the wiki-pages. However I need some guidance. I have several servers behind the router, a RB2011UAS-2HnD-IN. It is connected in the following way Public IP (DHCP from ISP) - ether 1 ether 2 - L2...

Sorry for the very long time before reply. I just haven't had time to work with the equipment. removing all the routing worked good. Now a question, If I use ether1 (which doesn't seem possible, I have probably missed something in the config and will check on it later) as incoming port from the rout...

So I've finally joined the great world of RouterOS after a couple of years behind the pfsense. Now I am more confused than ever.. As stated in the topic, I want my RB2011 to be the router and gateway for my internet connection while the RB750GL should be a pure switch with one port mirrored (this to...