You are damned right - that's the reason why I wanted to create a container, which is nearly self-configurable like the MUS project. Just setup the Mikrotik-things for running a container, load the image and voilá you are (nearly) done. I suppose it will be a nightmare when this kind of configuratio...

Hello again, so I tested the reported problems: 1.) The error described as "cgroup-error => read-only filesystem": / # rc-update add mosquitto default * service mosquitto added to runlevel default / # rc-service mosquitto start mkdir: can't create directory '/sys/fs/cgroup/openrc.mosquitto...

Well, first of all thanks for your credits you gave me. I really appreciate them 8=) So now for some "hard" stuff: Running some sort of process that depends on cgroups (regardless of v1 or v2) will not run at all. But this is not because of the structure of the builded containers - it is b...

Well, you are damned right - I break the one-process-one-container rule. But this is intended in this situation. Because of the fairly small size of the images, and therefore the minimal use of the disk on the mikrotik device, this is no problem at all. Breaking the "golden rule" is intend...

Well, you are right - perhaps someone could setup another mirror there. I am using the mirror for default, so I put it in there. On the other hand, this container is expandable while running. So I am created a alpine-line-openrc_minimal-container, which could be used for anything you want (and ros-c...

Hi everyone, well in the screenshot you posted, please look at the last lines, the filesystem. Normally all content of a container-filesystem (container-store) may not be visible. It is only stated out as a single "container-store" entry. Several times I saw that the container "breaks...

Hello everyone, First of all, please check if the usb-drive is "ext4" and NOT using a "MBR" partition table (during formatting). Sometimes ros is a little beasty with the handling of disks. When I was about to extend my disk (on CHR) I got really mad on doing that (several reboot...

Well, this project and the regarding container-images run on most mikrotik-installations. I use it mainly on a CHR-system, because this gives more cpu-power, a lot of ram- and disk-memory. Also you could install it on a portainer setup with no modifications: https://www.portainer.io/ Perhaps my alp_...

Well, I saw this issue already, thanks. The worst case is that USB2 / USB3 is mapped to a different slot. That means if you installed on USB3/slot, switching to USB2 gives no access then to your container. Using my container-image I just finished downloads on a "normal"-disk-installation i...

Hi everyone, perhaps it might be a storage problem ? I discovered that using a "normal" USB3-Memory-Stick in a RB5009 slows down the performance massive. When running my project in a chr-environment it is very much faster. USB-Devices have mainly only 1 (or 2) read/write-threads at the sam...

Hello everyone, I just completed a new container-project for Mikrotik-routeros-based devices. The project's aim is to have all packages needed for updates/upgrade locally without installing a separate server in the network environment. Perhaps this one is useful for someone. I use this regularly fro...

Hello everyone, well, update run well - but I got massive problems with VLAN's and bridging. VLAN on my main network 192.168.xxx.0/24 run fine, but the other VLANs made massive problems. It looks like that a port delegated to a special VLAN and set to HW-offload the VLAN-tag, did not remove the tag ...

Hi everyone, perhaps an offtopic question here: Has the connection tracking time value influence on the "NAT - keep alive"-value ? Or is there a special switch to set the "NAT - keep alive"-value ? I am suffering some problems with the "old" problem VoIP/SIP on natted u...

Hi,

thank you for your kind response. Well, DNS-resolver is working fine
and accessing via IP is also possible without any error.

So I agree to your doubts about winbox 8=)

Perhaps this could me crosschecked by mikrotik ?

Thanks.......Detlef

Hi everyone,

I tried winbox 3.11 with remote access to a "new" domain, ending with toplevel com.de (sub.domain.com.de).

Well, no connection possible this try. Perhaps winbox 3.11 isn´t able to handle such domains (com.de-ending) ?

Thanx and Greetz from Germany.......Detlef

Hi everyone, anybody here who has problems with CAPsMAN in v6.38.5 ? When adding new interfaces in CAPsMAN, there is a "zero"-mac entry. Or perhaps I am some kind of faulty in configuring ? When adding a new Caps-Interface the MAC (not the radio-MAC) was added correctly (not only "0&q...

Question about mAP lite, those who said about some noise. How loud is this noise? How many centimeters (distance) from your ear can you hear it? I have got 5 pieces of hac AC lite here running/configuring the last week (2 already on the table) - no noise at all.... Both with PoE-powering and "...

Hi! After i upgrade from 6.30.4 to 6.34 i discover ipv6 was not working anymore. The issue seams to be the ipv6 dhcp client stuck in "Status: searching...". After i click the "Release" button the status is switching to "Status: bound" and then ipv6 is working fine. I'm...

What is the actual problem with sorting? We fixed Winbox and DHCP leases. Big part of information was not shown for static entries. Now you can see it. Please send to support@mikrotik.com screen shots where we could see correct and incorrect behaviour. I suppose the old behaviour is fixed in mind, ...

There is something wrong in 6.33.6 and 6.34 relating secondary column sorting in WinBox, both 3.0 and 3.1. See the screenshot from 6.33.5 and previous versions - I use the sorting where ascending Address is primary and descending Expires secondary column. dhcp-server-leases.png I can not set that i...

Hi everyone, well, congratulations for the Dude project - working fine... But, also some problems here with 6.34-update : Main-Router 2011UiAS-2HnD and two RB952Ui-5ac2nD with CAPsMAN-configuration. I recognize that two mobile phones are drained when connected to AP/CAPsMAN. Is there something wrong...

Hi,

with RB951G-2HnD the same. Just terminating and no connection.....

Carrier: Deutsche Telekom 6000RAM DSL.

(Remote site - will checkout tomorrow).

Greetz.......Detlef

Well, to be more specific - I´m counting traffic on DSL and UMTS-Client here for myself. Perhaps you want to check out "simple queue" - to see if the packets are counted here correctly.... On my side this is running fine right now... [admin@mikrotik.homenet] /queue simple> print Flags: X -...

Hi ! Well, ok - I understand.... So I´m planning to change my hardware to RB2011UAS-2HnD-IN in the future... Never mind - so please point this exactly out on the hardware-compatibility-list - that in the future this point is clear and no "useless" buy of AR9271-USB-WLAN-card is done anymor...

Hi !

Just a small question (not to complicate that stuff at all):

Did someone got openVPN-Server running in conjunction with PPPoE-Client ?

(Here´s my posting about that: http://forum.mikrotik.com/viewtopic.php?f=1&t=72072)

Thanks

Greetz.......Detlef

Hi !

I´m getting no counting because I used also "Queue Type = Default"

Perhaps changing this to "ethernet-default" may help ?

(Just a thought .... 8=) )

Greetz.......Detlef

Hi everyone ! After studying the supported-hardware-list I bought a Alfa-WLAN-Adapter AWUS036NHA (USB). Then I bought a Level 4 license for my Via-based Mini-ITX-System. (Technical Specs: ViaC7 - 1,5 GHz - 1 Giga-VIA/3 Realtek-Giga-ETH - 1 MB RAM - 2 GB SSD-Disk - Jetway-Board) PPPoE-DSL-Config and ...

Well, after using 6.0rc1x3/14 I found out, that the "fixed" openDNS-Servers are now placed in the right place. I used before 5.24 - there the "dynamic server"-field was empty, although I got dynamic dns-servers from my ISP. Now with version 6.0rc13/14 the dynamic-field is populat...

Hi everyone ! I´ve read all the postings regarding openVPN & PPPoE-Client so far, but let me again ask some questions.... I´m running v6.0rc13/14 on x86 with DSL-Modem connected via PPPoE-Bridge & Client. Therefore I´m running in PPPoE-crashes as described in other postings before. So is the...