MikroTik

Vitor

Hi, I´m trying to do a mesh network with 12 OmniTIK 5 PoE ac, but i´m having a problem. If i try to ping or access to some of them they ping and has timeout to (50% of response) All off the antennas has line of sight, same SSID, same profile password.. They are already installed on posts of 10 meter...

Vitor

Thanks for the Tip samsung172

I will try.

Vitor

Hi all, Does anyone know, if it is possible to store all browsing data (visited links) of a client associated with an AP in a remote database?? In this case, for future analysis if necessary. Appreciate your help in advance scenario: I have a client that have some AP´s that provides free internet. T...

Vitor

Hi , I´m trying to do some tests with subnet /31. I found in the forum that there is a workaround to use the /31 subnet in PTP ethernet links. Does anyone know if Mikrotik suport the RFC3021 in the last Ros? If no, is there a roadmap to Mikrotik enable/suport this feature? Thanks in advanced, Regards

Vitor

Thanks for the help uldis.
indeed appears like with routerOS 6.41 that is possible.

Regards

Vitor

Hi Guys

Does anyone know if i could configure de the new KIT LTE in bridging mode and pass de public IP Address to another mikrotik interface?

Aprecciate your help.

Regards

Vitor

Thanks for the Tip

Regards,

Vitor

Hi all,

I need your help to understand if Mikrotik RouterOS permit to configure one interface in standby mode (down), like Cisco backup interface (not VRRP).

Appreciate your support
Regards,

Vitor

Many Thanks for your tip Normis

Regards

Vitor

Hi all, I need your help. I need to create a script (or npk??) with some default configuration about 3 parameters that survive to routerOS reset, like, if client do one reset to the routerboard, the mikrotik start always with that 3 parameters configured in default configuration. Is that possible? I...

Vitor

Hi Normis,

Yes, i´ve tried your suggestion, but is the same result, i.e., i can block everything but only open a half page of CNN (because the embedded code of the page to another sites)

I have no more ideas

Vitor

Thanks for your quickly reply pe1chl.

But even if i open for ex youtube IPs in firewall riles for the embedded page code, and the IP address of CNN, the page only open a half.

There are no other way, that i can try to configure?
Sorry my insistente.

Regards

Vitor

Hello, I need your help to make two filter rules, i think. I have a client that have 5 stores. And in every store have two PCs. He wants that the PCs only access to the website www.cnn.com (151.101.133.67), and drop everything else. I cannot hit the correct rule (i think inside the cnn page, there a...

Vitor

Hi all, I have the following problem. Im trying to create some rules in a store that opening one only web client page and blocking everything else, like YouTube, facebook, etc. The problem is that the pages client have some links to youtube (with one vídeo included). At this moment i only open half ...

Vitor

Maybe a mix Metal and Groove With omnis? don't. I would use hAP ac + wAP ac. What's the internet bandwidth? As main router / controller I'd go for a RB1100AHx2 or CCR. Hi pukkita, Thanks for your help. The internet bandwtih will be 1Gbps. If i use hAP ac + wAP ac, how many access points i must use ...

Vitor

Hi, I need your help and experience to do the following. I need to prepare a event with 1200 concurrent wireless users (smarthphones, tablets). I was thinking to use the mikrotik dual band 2.4 and 5Ghz. Maybe a mix Metal and Groove. The local is as open space building. My question is how many AP´s m...

Vitor

Hi fellas,

Does anyone have a case study of how to implement mikrotik aps on eduroam environment?
i work for a university that wants to try to implement the solution, but we dont know if works fine

Thanks for your help and support

Best Regards

Vitor

Thanks for your reply.

Do you know if there is a roadmap to L2TPV3?

Thanks again

Vitor

Hi,

Does anyone know if RouterOS works fine with L2TPV3? And how can i configure it?

Thanks for your help.

Regards,

Vitor

Hello to all, I´m working with a ISP that uses Nokia 7750 as Wireless LAN gateway for Wi-Fi network aggregation. The strategy is to test mikrotik Access Points with this platform to delivery in a mass-market in future. We try to understand if we can use softGRE or L2TPv3? The DHCP-Relay option 82 wi...

Vitor

Thanks for your help and indications.
They are very valuable to me.

King Regards

Vitor

Hi all, I'm trying to "design" and then implement the following scenario. A PTP 6Km radio link between an eolic tower and another Tower. The first eolic is 6 Km over sea (so i need IP66 enclousre), the second tower is in coast. Maximum throughput 10mbps. My question is, what kind of antenn...

Vitor

http://wiki.mikrotik.com/wiki/Manual:Li ... nse_Levels

Thanks for the link. It has some useful information.

Vitor

Explain the effects you need to achieve. Hello Jarda It's for a solution, that the ISP say we will need it. The fiber circuit is deliver through the routers ISP bridge port, and the access to the web is through a VLAN, and lacks an IP alias. It´s all say for now. We do have an RB2011 for the instal...

Vitor

Hy,

I need your help to understand if the RB2011 supports IP aliases.

Thanks in advanced
Regards

Vitor

Hi everyone,

Does anyone know how many simultaneous users can be authenticated in the in the following RBs?

RB952Ui-5ac2nD
RB941-2nD
RB1100AHx2

I was looking and didn't find out. Is there any link or site with this information.

Thanks in advanced for your help
Best Regards

Vitor

Thanks for your help and explanation.
Now i have a more clearly idea.

Vitor

Hello, I'm thinking to acquire um CCR1009-8G, but i have some doubts about vlans. Is it possible to have two vlans with the same number into two different hardware interfaces, i.e., vlan50 on eth5 and vlan50 on eth6? different gateways for each interface, and also dhcp client on both? I appreciate y...

Vitor

what client are you using to test? are you running in 802.11ac mode or 802.11a mode?

The test is running under 802.11ac mode, and i use a several clients.. iphones, desktops,.. mac... everyone as ythe same problem.
Thanks

Vitor

Hi, I´m testing my RB wAP ac, and after several tests i detected my tthroughput is very lower. The RB is connected to a cisco router, and via ethernet cable directly on Cisco my throughput is 85Mpbs. If i connect through the AP on 5Ghz, my throughput is about 20Mbps. There is a possible configurati...

Vitor

File is stored in ram drive not in flash. Put it in /flash folder and try again.

Thanks for the tip jarda, it solve the problem.
Regards

Vitor

Hi guys, Recently I bought a mikrotik wAP ac. After configuring it, i try to do a backup at the bottom BACKUP (in file list) and it´s made. But if i power off (or reboot) the wAP, the configuration disappear from the files. Looks like the config is in ram and not in flash. If i do, in command line ...

Vitor

So you don't want the two networks to communicate with each other - no matter if wired or wreless. /ip firewall filter add chain=forward action=drop src-address=192.168.20.0/24 dst-adddress=192.168.25.0/24 add chain=forward action=drop src-address=192.168.25.0/24 dst-adddress=192.168.20.0/24 -Chris...

Vitor

Configure the same horizon value on the two port entries for wlan1 and wlan2 in the bridge.

Thanks for tip pe1chl.
I will try, then post the result.

Vitor

Hi guys, Recently I bought a mikrotik wAP ac, and i have configured two virtual AP (client and guest) on interface WLAN1, and another two virtual AP (client and guest) on WLAN2 interface. WLAN1 192.168.20.0/24 WLAN2 192.168.25.0/24 After some tests i can connect to all SSID´s, and i can get out to ...

Vitor

if you can bridge the modem interface with an Ethernet interface, that would probably be the best solution.

Thanks ZeroByte, and then in Ethernet interface i can configure the two VLAN´s. I will try

Vitor

Hi, Is it possible to put my RB912 with modem huawei MU709s, in enabler mode for a Cisco router? How can i do that? The idea is that the RB receive de public IP address and pass it to the Cisco transparently! I have a configuration of another equipament (teldat 4G enabler) that do this. Can i replic...

Vitor

Hi, Is it possible to put my RB912 with modem huawei MU709s, in enabler mode for a Cisco router? How can i do that? The idea is that the RB receive de public IP address and pass it to the Cisco transparently! I have a configuration of another equipament (teldat 4G enabler) that do this. Can i replic...

Vitor

No you cannot put lte interface in bridge.
You need to make routing, or nat.

Thanks for the tip

Vitor

Hi, I´m new here, and i have a little question: It´s possible to put my RB912uag (with modem Huawei MU709s), interconnected via ETH, and give link to a cisco??, that is, i wanted the Cisco received link for internet from RB912. How can i make that type of connection/configuration?? It will be a brid...

Search found 40 matches