MikroTik

Thalid

Kinda old Vulnerable shure there must be upgrade from cisco out if your router is still supported

Getting cisco ios is easy even whitout an support deal

Thalid

check that the boards firmware are the newest
->system>routerboard

Thalid

been havent troubble connecting whit client since 6.34rc43 server is vmware

Client trows something whit 10061 no connection but i cant read the rest

Thalid

Long time sinze i used linksys,but its not different from anyother ap.

Make shure it`s dhcp is turned off and set it as a dhcp relay

Thalid

I get this error trying to upgrade: ERROR: missing wireless-6.33.5-mipsbe.npk Works on one side of my link, not on the 'receiving end' of the link (same hardware). Have rebooted multiple times, and downgraded from 6.33.3 to 6.32.5 error persists. Tips? Thanks, peter the pack have been replaced, see...

Thalid

Hi there

I'm getting the following error when I try and download and install:

ERROR: missing wireless-6.33.5-ppc.npk

Regards

Richard

Se my previos post about the wireless error

Thalid

For those getting the "ERROR: missing wireless-6.33.5-mipsbe.npk" This pack have been replaced by the wireless-fp You need to uninstall the old pack and install the new. Why we start to get this now i domt know my 435 was on 6.30.2 and it just now i got it Doing it this wayover the wireles...

Thalid

I am update hap lite from _6.31rc6 to 6.30.2 and the script which one is worked fine in 6.31rc6 not work anymore!

Technical thats an downgrade

Post script whitout moore info we cant help

Thalid

nv2-preshared-key=lollollol nv2-security=enabled Did the trick :D Not shure why i had to add it under wireless->interface name->nv2 tab when i allready entered the pre shared key in the quick set.... when i choised what wireless that i wanted to connect to.. used this guide so guess its wrong then ...

Thalid

Trying make a bridge betwhen 2 sxt Ap /interface bridge add name=bridge1 /interface ethernet set [ find default-name=ether1 ] name=ether1-local /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=\ 20/40mhz-ht-above disabled=no l2mtu=2290 mode=bridge name=wlan1-gateway ...

Thalid

Routerboot 3.07 is abit old acourding to http://routerboard.com/RB450G
3.18 should be the latest.

To upgrade:
System->routerboard-> see if you are offered 3.18 hit upgrade and do a reboot

Thalid

Better stop opening threads without having an certain release date or a certain list with bugs that are really fixed without introducing another ones, this approach is kind a childish and imature Well the testing on this release have been going on for some weeks now,so i whouldnt call it imature an...

Thalid

The spam have to come from a source exchange server only replays the info and for that it need valid user credentinals. How is you network setup do you run the server behind the same ip as you provide internet for internal users? Some virus send spam on smtp that is part off most computer ore they c...

Thalid

that kind of mail server is this?
A mail server should only send spam mails if the mail server is infected ore a valid user is infected by a virus.

One more senario is
If this server is runned on the same ip as the other internal client of your orgination then the infection is on you intranet.

Thalid

Do this issue accure after you upgraded Ros? in that case from what version to?

If these connections comes from spesific hosts you can make exceptions in the firewall to allow them.

Thalid

not 100% shure about this but i was told just hours ago that SFP is the same unit for both 50 and 62.5 micron but need to use the same patch cable type as the fiber itself.
We just changeing a cable at work and this was what my colleague told the custumers It guy.

Thalid

First you have to know if you have multi ore single mode. orange is normaly multi. 50 vs 62.5 have whit core diameter on the cable and the speed. For 850-nm Gigabit Ethernet, these bandwidth values support link lengths of 220 meters over 62.5-micron fiber and 550 meters over 50-micron fiber http://w...

Thalid

I recieved a new mAP2n today which we connected and for most of the day with no issues, brought the unit home and connected it up using the PSU from my 951-2n and the unit worked for about 15min before becoming unresonsive. I rebooted the device with and on boot all LED remain illuminated but blink...

Thalid

i know motorola/canopy reverses polarity im not shure about cisco. brown and blue pair is switched in this case this applays to 100mbit. gb im not shure how poe works

Thalid

where is wireless-fp ??
all-packages-mipsbe-6.20.png
all the above files are from all-packages-mipsbe-6.20.zip

P

happens when i check the package aswll

Torrent version for mipsbe contains it

Thalid

someone might doing a arp/ip scan on your network. manually ore someone can be infected by a virus

Thalid

http://forum.mikrotik.com/viewtopic.php ... 28#p448872

Thalid

3 rb133c's (using mipsle code) These units are probaly to old to run ros v6 in general units support 2v updates and these boards are from around 2006 http://routerboard.com/pdf/rb133ugA.pdf Then why would they release 6.x code for them then? just refering to what i read in some older posts like thi...

Thalid

3 rb133c's (using mipsle code)

These units are probaly to old to run ros v6
in general units support 2v updates and these boards are from around 2006
http://routerboard.com/pdf/rb133ugA.pdf

Thalid

look for multi wan and load balancing on the forum there is several topic about it.
http://mum.mikrotik.com/presentations/US12/steve.pdf

From some forums i read that load balacing wont be able to use100% of the dsl connectio, but how mush speed you loose i domt know.

Thalid

Isn't it a bad practice to use IPs like 111.11.0.x? what are you talking about? Look carefully at the CCR screens 8) Dosnt relly mather if that is an exsternal ip. dosnt harm anyone if not the chinesse are suiing mt over useing it 8) Used something simular once myself and the it apartment of the ne...

Thalid

did you reboot it after you upgraded the fw?

Thalid

I upgraded one Omnitik from ROSv6.12, firmware 3.10, to ROSv6.17, firmware 3.17, wireless-fp enabled. I'm noticing port flapping. Omnitik is through ether1 connected to RB493G, which has ROSv5.26, firmware 3.07. Auto Negotiation is enabled. Tx/RX Flow Control is off. In Advertise (10M half, 10M ful...

Thalid

been googeling this subject myself and the stuff people talks of is useing squid and Ids

Thalid

from my experince whit eletric component in harch envirement like outside its bether to leave a hole at the buttom (1-1,5mm) instead of try to close things completly.

allsow i find it abit weird that these no selling arond the lid of the device, atleast it domt look like it from the picture

Thalid

blocking whole countrys are not a good solution. If you havening problem whit bruteforce attemts use the firewall and drop them automatic afte xx attempts and for xx of time

http://wiki.mikrotik.com/wiki/Bruteforc ... prevention

Thalid

http://wiki.mikrotik.com/wiki/Bruteforc ... prevention

Thalid

been mixing around whit alot of settings after reading several posts but none seems to help

what puzzels the most is that the bandwith test gives me he corect troughtput when testing my internet but still i cant download whit moore then 300kbs

Thalid

I was able to mostly alleviate the issue if I set the AP to B/G-Only, disabled WMM, 20mhz channel, Chain-1-only, antenna-A Only. You might try this, as long as you can deal with B/G speeds.

Didnt do anything for me.

Thalid

hi

have the same/simular issue http://forum.mikrotik.com/viewtopic.php ... 21#p363021

Have you tryd doing an online test whit a speed meter? cause i found that this gives me the atleats the correct speed of my connection even if i can not download stuff at same rate

Kristian

Thalid

Did some bandwitch test from other sources`s then the first

http from my web server same network 12mbit
online bandwitch test from tptest.se 6.01 mbit this value is correct as i only have 5 to 6.5 connection atm.

Kristian

Thalid

looks like same troubble as
http://forum.mikrotik.com/viewtopic.php?f=13&t=71215

Thalid

i have an 435c whit two R52Hn cards. One of these R52Hn is setup as an ap on the 2.4 band the other is disabled atm My goal is to create up to max 24 virtual aps one for eash household whit maybe 3 ore 4 client on a 100mbit fiber link. But at the testing stat on in now is that i only get a troughput...

Search found 38 matches

Re: RouterOS 6.38.3's LLDP Craches Vulnerable Cisco Routers

Re: LTE modem not detected

Re: v6.35rc is released, new wireless package!

Re: Connect an Access Point to MikroTik OS

Re: v6.33.5 [current] is released!

Re: v6.33.5 [current] is released!

Re: v6.33.5 [current] is released!

Re: v6.30.2 bugfix release

Re: bridge problem

bridge problem

Re: Massive packet loss on WAN after upgrading ROS 5.26 -> 6.28

Re: v6.28 will be released this week!

Re: Abuse of port 25

Re: Abuse of port 25

Re: Ping And Some Of Ports Are Blocked Unexpectedly And Unwa

Re: How do I know what fiber a Mikrotik SFP will work with?

Re: How do I know what fiber a Mikrotik SFP will work with?

Re: Bircked mAP2n within 15min

Re: mAP 2n PoE not working with Cisco Switches

Re: v6.20 released!

Re: Sequential Arp requests

Re: CVE-2014-6271 (shellshock) bash bug is mikrotik affected

Re: v6.19 released

Re: v6.19 released

Re: PCC with double NAT environment?

Re: Test racks

Re: CloudCore FW Upgrade

Re: v6.16/v6.17

Re: how to block teamviewer?

Re: Water in the METAL 2SHPN

Re: Blocking countries IP blocks for security

Re: Feature Request: SSH Brute Force Protection

Re: low throughput

Re: Really SLOW wireless

Re: Really SLOW wireless

Re: low throughput

Re: low throughput

low throughput