MikroTik

buzzdee

Hi ubikrotik, I had a similar issue a few months ago: https://forum.mikrotik.com/viewtopic.php?f=3&t=134737&p=663723&hilit=buzzdee#p663723 Doneware pointed out, that the M33G only supports m.2 ssds with pcie interface - all ngff devices listed on Kingdian's website have sata interfaces. ...

buzzdee

Hi Donewave,

thanks for figuring that out. I think I'll go with an industrial micro-sd and see how that holds up to a dude-database.

Have a nice day

buzzdee

buzzdee

Hi, are there plans for the future to also support Sata M.2 drives in the M33G (provided the boards hardware is capable of that)? If I read brochure and quick-guide correctly, only m.2 drives using the pcie-protocol are currently supported. Unfortunately, 2242 size m.2 pcie drives seem to be pretty ...

buzzdee

@jmi2 short version: With this routerOS version, if there is single client with older card like CM9, then all other clients got no change to communicate without issues. Simply if such client is connected to AP, then mobile and notebook have horrible connectivity and LG TV and hama radio got disconne...

buzzdee

@sindy

Thanks for pointing out which order to use in scripting. I must have been lucky that my scripts worked in earlier versions without paying that much attention to the order.

buzzdee

Hi strods, thanks for the quick reply. First of all, please do not post version u relafed issues within new release topic Sorry, I should have been more precise - what I experienced was on 6.41.2. Heres is a snippet from the script. I'm not using ID's but the interfaces name: # Set UMTS Interface na...

buzzdee

Hi, seems the issue described here https://forum.mikrotik.com/viewtopic.php?f=21&t=128915&p=637801&hilit=no+such+item#p637801 still persists. When enabling/disabling ppp-devices from terminal or script, I get "no such item (4)" the first time I run the command, but it works whe...

buzzdee

Hi, there is also the possibility to do a reset via AT commands like discussed here: https://forum.mikrotik.com/viewtopic.php?f=2&t=74043&start=50 or here https://forum.mikrotik.com/viewtopic.php?t=56463 The AT command however works only with PPP devices, not with LTE Cards in direct ip mode.

buzzdee

You're welcome, glad it works. That pine tree setup sounds adventurous

buzzdee

Hi Tom, if your DSL-450G has a public IP address, you could set up a L2TP Tunnel between the two 450Gs and bridge that to your 192.168.1.XXX interface on both sides. The DSL-450G would be the L2TP server, the LTE-450G the client. In case your DSL IP address is not static, you need a service like dyn...

buzzdee

Since the M33G has lots of storage options and quite some "horsepower", will there be a dude-server package for the board?

buzzdee

Mee too
+1

buzzdee

*) ipsec - allow to specify remote peer address as DNS name (CLI only); does this mean ipsec tunnels can be established between 2 sites with dynamic ip addresses, so I can get rid of the additional L2TP Tunnel? In road warrior setups, yes. I tried that setup, mikrotik routers on both ends. Router 1...

buzzdee

As of version 6.37 I had some trouble using RoMon with R52 equipped devices in station mode.
viewtopic.php?f=21&t=114926&p=569766#p569766

The 6.40rc's i've tried so far (6.40rc32 and 6.40rc41) have solved this issue.

buzzdee

Hi OKNET, I just had a similar question, did some experiments and here is what I observed: If you set the wireless frequency to "auto" in AP mode, the AP scans for "free" channels and if found, uses one of them. I don't know if the AP is able to discover the least congested chann...

buzzdee

Hi ditonet, thanks for pointing me in that direction. Meanwhile I figured out, that The Dude sends out a notification for each service it's configured to monitor. One has to keep in mind, that notifications are sent out on changes and not on a status reached - so when a service goes from "up&qu...

buzzdee

I have a few devices on which im checking more than one service. If services go down but at least one of those services stays reachable, the device's status becomes "partially down". There seems to be no way to get a notification about status changes to "partially down". Is there...

buzzdee

I'm a little puzzled...changelog for 6.39rc12 states ike2 - include identity in peer address info so does this mean it's just displayed somewhere or that we now can set a "peer ID", like we are already able to set "My ID" in the Advanced-Tab of peer configuration? A little more d...

buzzdee

I'm having trouble using RoMON over a wireless-link. Stations can discover AP and what's behind it, but not the other way round. AP's only discover whats connected via cable. The problem first occurred with 6.37.1, still persists with 6.37.2. edit 1: Did a downgrade on the station to 6.37 - no luck....

buzzdee

Just out of curiousity, if you check country-info, it shows dfs-flag and passive -flag. What does passive stand for? country: germany ranges: 2402-2482/b,g,gn20,gn40(20dBm) 2417-2457/g-turbo(20dBm) 5170-5250/a,an20,an40,ac20,ac40,ac80,ac160(20dBm)/passive 5250-5330/a,an20,an40,ac20,ac40,ac80,ac160(2...

buzzdee

How are the signal levels? For example in comparison to some usb wireless dongles, or internal laptop adapters. I'd like to bump this, too. Did some experiments comparing the mAP lite against mAP 2n in terms of signal/snr, both configured as clients to the same AP. In all Tests mAP 2n seems to have...

buzzdee

SOLVED! ...sometimes it takes a second approach after a refreshing summer-holiday. Looked at the configuration again and now a ppp-link entered my perceptive universe... http://i68.tinypic.com/2uym9mu.jpg That ppp-link shares the APs bridge address 172.20.1.1. Allthough it was set to passive via os...

buzzdee

Hi there, got some trouble with the following setup. OSPF first seems to work, but after a while routes on the AP drop. I can't figure out where I went wrong... When I switch from NBMA to PTMP it works. http://i66.tinypic.com/20z76sy.jpg AP /interface bridge add arp=proxy-arp name=bridge1 /interface...

buzzdee

Hi MustaMT, there is a lot of info on this topic (and also on Unified Networking Lab) http://forum.mikrotik.com/viewtopic.php?f=2&t=99658 My (somewhat dated but) working Mix of GNS3, Qemu and CHR versions is http://forum.mikrotik.com/viewtopic.php?f=2&t=99658&start=50#p522618 - GNS3 1.4....

buzzdee

Solved it! Giving the domU a fixed UUID in its configuration file fixes the changing /system license system-id. # 128-bit UUID for the domain as a hexadecimal number. # Use "uuidgen" to generate one if required. # The default behavior is to generate a new UUID each time the guest is starte...

buzzdee

Hi, it doesn't matter if I restart from RouterOS, do a restart from the dom0 using "xl restart" or forcefully restart by rebooting the dom0 hardware. Every time the CHR domU gets a new system ID. From the infos I gathered yet, the harddisk is the key component that is checked to confirm th...

buzzdee

Hi folks, I'm running CHR 6.35.4 as XEN full virtualized domU on Debian systems, Wheezy (v7) as well as Jessie (v8). I'm using the Kernels and XEN-tools provided by the distributions and the CHR raw-image. The only real issue I'm having is, that every time I reboot the virtual machine, /system licen...

buzzdee

After a few weeks of operation, I had one of the Huawei 909s-120 go down and not reliably come up again. First updated the Huawei LTE-Card firmware - no satisfactory result. The upgraded RouterOS to 6.38rc28. Now the LTE-Interface comes up reliably, but stops working after a few megabytes traffic (...

buzzdee

Just encountered the same Problem with Huawei 909s-120 (FW 11.617.01.00.00) in 912UAG-2HPnD (Basebox 2) with Routeros 6.36rc28 (RB-Firmware 3.33). Doing a USB-Power Reset for 10 Seconds brings back the Huawei LTE-Interface, but only for a few more megabytes. @Shaeto - Just in case you didn't figure ...

buzzdee

Hi, had the same problem at first, but the solution that worked for me was already described here. I'm using a 912UAG-2HPnD, ROS 6.35.1 with Routerboard firmware 3.33. The me909s-120 has firmware-revision 11.613.03.00.00.

buzzdee

I just configured a 912UAG-2HPnD (Basebox 2) running RouterOS 6.35.1 with a me909s-120 (Firmware Revision 11.613.03.00.00) and its working. At first I didn't get an entry in Interface->LTE, but after switching the USB Mode as described here I could configure an APN (Interface->LTE->APN), added a dhc...

buzzdee

THere will be UDP support in ROS v7.

Finally. Thanks a lot!

buzzdee

Hello Alex, I've followed your instructions, everything completes without any errors: # /opt/qemu/bin/qemu-img convert -f vmdk -O qcow2 chr-6.34.1.vmdk hda.qcow2 # mkdir -p /opt/unetlab/addons/qemu/mikrotik-6.34.1 # mv hda.qcow2 /opt/unetlab/addons/qemu/mikrotik-6.34.1/ # /opt/unetlab/wrappers/unl_...

buzzdee

Got it to work, with the qemu 32bit binary and only the 6_31 image so far Had a similar experience - tried a few versions of GNS3, QEMU and CHR-Images and arrived at this working setup: - GNS3 1.4.3 - QEMU 2.4.0 (released August 11th 2015) using qemu-system-x86_64w.exe - CHR 6.33.5 It takes some ti...

buzzdee

Hi everyone, I recently go my hands on a rb2011uas and since it is (for a mipsbe board that is) quite powerfull, I set up a Metarouter and did some quick benchmarks. Since it was recommended here http://forum.mikrotik.com/viewtopic.php?f=15&t=60746&start=400#p365100 I used ROS 5.25rc1 and 6....

Search found 35 matches

Re: rbm33g and m.2 slot problem

Re: M33G M.2 Sata Support

M33G M.2 Sata Support

Re: v6.42rc [release candidate] is released!

Re: v6.41.2 [current]

Re: v6.41.2 [current]

Re: v6.41.2 [current] - scripting and terminal "no such item"

Re: RESET miniPCI RB411U

Re: VPN Advice, suggestions [SOLVED]

Re: VPN Advice, suggestions [SOLVED]

Re: Newsletter 79 (MUM EUROPE ANNOUNCED!)

Re: 6.40rc11 — IPsec peers can now be specified with DNS names, but what about policies?

Re: v6.41rc [release candidate] is released! New bridge implementation!

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Re: Can i setup my mikrotik to auto select the best channel?

Re: Notification about "partially down" devices?

Notification about "partially down" devices?

Re: Winbox 3.8 released!

Re: v6.37.2 [current] is released!

Re: mAP lite

Re: OSPF NBMA over WLAN Routes drop

OSPF NBMA over WLAN Routes drop

Re: GNS3 Problems.

Re: CHR as XEN domU System ID

Re: CHR as XEN domU System ID

CHR as XEN domU System ID

Re: Huawei ME909s-120 not recognized

Re: RB912UAG with LTE Card Huawei ME909s-120 stop working after 50MB Traffic

Re: Huawei ME909S-120 failing

Re: Huawei ME909s-120 not recognized

Re: Feature request: OpenVPN compression LZO and UDP

Re: RouterOS Virtual Labs

Re: RouterOS Virtual Labs

Metarouter Throughput-Performance on mipsbe (i.e. rb2011uas)