MikroTik

wcsnet

This is what I do to get modes to mqtt # wcs, copyright © 2010. all rights reserved # script version : 1.0 :local errors 0 # :global gostatusXscript :while ($gostatusXscript = "no" ) do={ :delay 5s; } :set gostatusXscript "no" # :do { :global modbusregisters { {":set tmp [/i...

wcsnet

the config files for applications get pushed globally both internal and external systems use them so one set of ports just makes for easier management

wcsnet

Okay that works, however what do I do with servers on the same subnet

wcsnet

Currently I have my local dns a records pointing to the router?

wcsnet

thanks @mkx

Sounds simple enough I how ever see one concern.
Some of my internal services run on different source ports and I would still require a dot-net to do the port translation

Example service runs on port 1050 and the clients use 5050

wcsnet

Hey Team, For some web services I run the source ip address is extremely important. These web services run both internal and external to the network. When using hairpin nat (src-nat -> masquerade ) I obviously lose the ability to see the source ip address. Is there I way I can use the static dns ent...

wcsnet

I have had great sucess with blocking all sorts of things useing dns, for whatsapp i have a script that adds all ip found in the dns cashe to a address list abvously my script is dynamic and can do this for anything isn't that simply put DNS static override and blocking DNS bypassing/sneaking ? Wel...

wcsnet

I have had great sucess with blocking all sorts of things useing dns, for whatsapp i have a script that adds all ip found in the dns cashe to a address list abvously my script is dynamic and can do this for anything

wcsnet

Had just about the same issue, i have global variable for thing used across a number of scripts, for example email addresses . So i have a file "post configuration load.rsc" to basically send just a email but this did not work with a exec "post configuration load.rsc" or import &...

wcsnet

so this can be done it just takes some clever scripting

wcsnet

I have a scripting solution that saves specified configurations and then from one central router pushes these to the listed router. Example from the central router i might do this: /system script export compact file="flash/configurator/system script" /system scheduler export compact file=&...

wcsnet

Or if you use your router as a dns server add a static entry and point it to somewhere

Sent from my iPhone using Tapatalk

wcsnet

Have a look at the fetch command it well documented and there is plenty examples

Sent from my iPhone using Tapatalk

wcsnet

You could always loop the wireless registration table

Sent from my iPhone using Tapatalk

wcsnet

Telnet and SSH is only available interactively so it cant be scripted

Sent from my iPhone using Tapatalk

wcsnet

WERNER.VENTER.MAIL@GMAIL.COM.

Sent from my iPhone using Tapatalk

wcsnet

Maybe a little but off the topic, i have a series of scripts that sync any confic on a per device basis from a central router or a few routers email me if you are interested

Sent from my iPhone using Tapatalk

wcsnet

Such good news this!!!

wcsnet

At the moment nope

Sent from my iPhone using Tapatalk

wcsnet

+1

Sent from my iPhone using Tapatalk

wcsnet

Have a lool here http://forum.mikrotik.com/viewtopic.php?t=22760

Sent from my iPhone using Tapatalk

wcsnet

Yep its ease are they all on the same sibme?

Sent from my iPhone using Tapatalk

wcsnet

Dude of no one replies send me a mail ill write it for you when i have some time you can then come post it here werner.venter.mail@gmail.com.

Sent from my iPhone using Tapatalk

wcsnet

Thank you !

Sent from my iPhone using Tapatalk

wcsnet

So this is what I did if anyone is interested: add action=passthrough chain=forward comment="-------------------------------------------------- router initiated traffic " disabled=yes add chain="input - x" comment="accept - new traffic" connection-state=new disabled=yes...

wcsnet

Wow those routers are super sexy

Sent from my iPhone using Tapatalk

wcsnet

Hallo Guys I am looking for a firewall filter rule to identify and accept traffic that was Initiated by the actual router. Example, if the router sends out a email I don't want to specifically allow input and output for smtp traffic but rather just identify that the router is sending a email and the...

wcsnet

Ip cloudy works well though i use it lots!!!

Sent from my iPhone using Tapatalk

wcsnet

Is there a document outlining the various thing quickset looks for for example what address etc....

Sent from my iPhone using Tapatalk

wcsnet

Well yes you can do this but would require some scripting i would separate the values first basically get data hours minutes ect each into their own variable then convert each to seconds so if you do this for your two date time samples you should have two seconds values which you can then subtract a...

wcsnet

Yep same issue here cant get l2tp working with iOS however pptp works fine

Sent from my iPhone using Tapatalk

wcsnet

I personally love ip cloud even if it just serves as a backup ddns service

Sent from my iPhone using Tapatalk

wcsnet

I also wanted to know if you could ssh or telnet from a script but apparently not it is only available interactively

Sent from my iPhone using Tapatalk

wcsnet

I also tried l2tp config for ios but could never get it to work pptp works fine thougj

Sent from my iPhone using Tapatalk

wcsnet

Did you check if the firewall is not blocking the traffic

Sent from my iPhone using Tapatalk

wcsnet

The get value might also be different for dhcp leases

Sent from my iPhone using Tapatalk

wcsnet

Yep you can do that but remember only static leases has a comment filed which i use in the acrip

Sent from my iPhone using Tapatalk

wcsnet

The firewall address list items that aren't dynamic is static

Sent from my iPhone using Tapatalk

wcsnet

What do you mean by static ip address table?

Sent from my iPhone using Tapatalk

wcsnet

You have to add a route to your companies subnet

add check-gateway=ping distance=1 dst-address=192.168.1.0/24 gateway=vpn client interface

Sent from my iPhone using Tapatalk

wcsnet

Seems like running the test on udp instead of tcp does not drain the cpu that much

wcsnet

JUAP # /interface bridge filter add action=passthrough chain=forward comment=\ "-------------------------------------------------- isloate dhcp server from wlan1" disabled=yes add action=drop chain=input comment="drop - dhcp traffic" dst-port=67-68 in-interface=wlan1 \ ip-protoco...

wcsnet

a cli command would be assume

wcsnet

This is my version of a resolve script it does ip to host name or host name to ip: wcsnet, copyright © 2010. all rights reserved # script version : 1.0 :do { :local content :local newhost :local oldhost :log info "******************** starting - ip resolve ip*******************" :log info ...

wcsnet

this is what I use can be used to get ip from dns name or dns name from ip. # wcsnet, copyright © 2010. all rights reserved # script version : 1.0 :do { :local content :local newhost :local oldhost :log info "******************** starting - ip resolve ip*******************" :log info "...

wcsnet

+1
Really needed

wcsnet

I think the interface torch is a interactive tool and cant be scripted.

wcsnet

This is a newer version it runs on 6.25 For this to work you have to add address list items and then these are pinged Example: /ip firewall address-list add address=8.8.8.8 comment="google dns1*100" list="router ping" The comment field is used to store the ping result as well as ...

wcsnet

/queue simple reset-counters 1

wcsnet

Check my script futhet up

wcsnet

Initially you just have to add

/ip firewall address-list add comment=0.0.0.0 list="my wan ip"

wcsnet

Send me a email and ill send it to you werner.venter.mail@gmail.com

wcsnet

Your mail syntax looks wrong

wcsnet

The best way to debug script is line by line. If there is one line that is wrong the entire script wont work at all. Try to break you script down into simple sections like in your example have the ping result written to a var and then use the var in your if. Small things like that make these scripts...

wcsnet

Report looks like this

wcsnet

:local content :local i :local megstotal :local bytestotal :local bytescurrent :local bytessaved :local megssaved :local bytesdowncurrent :local megsdowncurrent :local megsupcurrent :local bytesupcurrent :log info "******************** starting - queue usage update ********************" :l...

wcsnet

Maybe this will help Address list item looks like this add address=10.0.0.175 comment=wcsnet-ps1*100 list="router ping" :global scriptemail :global lastping :local content :local checkip :local checklaststatus :local checknewstatus :local checkcomment :local difference :local list :local a...

wcsnet

/system logging action set memory memory-lines=1

/system logging action set memory memory-lines=100

wcsnet

I have a asci image Glad to see someone also used my scripts :-) :local content :local i :local logcontenttemp "" :local logcontent "" :set logcontenttemp ":.you are logged into: $[/system identity get name] :-D" :set logcontent ("$logcontent " ."$logcont...

wcsnet

I use this My warring log I set to action email so I get mailed for warning log entries The address list entry should look like this add address=10.0.0.175 comment=wcsnet-ps1*100 list="router ping" :global scriptemail :global lastping :local content :local checkip :local checklaststatus :l...

wcsnet

:local date
:local time
:local day
:local month
:local year
:local hour

:set date [/system clock get date]
:set time [/system clock get time]
:set day [:pick $date 4 6]
:set hour [:pick $time 0 2]

wcsnet

I asked Mikrotik support a while ago about this and the response was that telnet within a script currently does not work...
Although it might function well in console.

wcsnet

This is the no-ip script I use: :global scriptemail :global ddnsurl1 :global ddnsurl2 :local wanipchecklast :local wanipchecknow :local wanipchanged "no" :local ddnsuser "xxx" :local ddnspass "xxx :local ddnshost1 "xxx" :local ddnshost2 "xxx" :log info &q...

wcsnet

The question is why are these not available yet

wcsnet

Had exactly the same issue as described above. Is there a way to log the average amount of connections per ip address to try and identify a base limit. Does connection limit work for udp as well, recently i had loads of udp attacks on udp port 53 and was wondering how i could limit connections like ...

Search found 65 matches