any solution for this issue
thanks

what do l need to get the mlppp working?
dsl route in bridge mode or dsl interface cards?
Thanks

Dear all
l have 3 dsl and have add all the Ethernet interfaces to the pppoe-client but can't still have the the three line up.
only one is active.
Any information will help.
the lsp is using juniter dsl
best of regards

Dear All
it is here the mlppp at last.
how do l activate it?
l went to the interface and add the dsl (bridge mode)interfaces to the pppoe-client but still show only one link up.
Any help
thanks

Dear gmeyer
thanks for your e.g
But in mine case l can see that the downlink is well balanced but the uplink uses only the default route .

Any help in load balancing the uplink too.
Thanks

Dear All Am using hotspot 3.6.everything works but sometimes the hotspot login page will not load and l get an automatic redirection to webproxy. l have disable both proxy in hot spot profiles. webproxy is also disabled. but when l go to webproxy connections l could still see connections from my net...

Greetings Am using 3.x versions and run userman.After running for about 4 weeks l get these radius is not respond message. if l downgrade the system to 2.9.50 it works again. is these a bug or something am not doing well. for the system to work again l have to format the server and do the installati...

Please how can this be applied on a mt with load balancing?
Thanks

any news on these topic

Dear All
l have tried to make a wds link between mikrotik 3.0 x86 atheros card and dlink ap 2100ap.
there is no wpa or wep activated.
it shows wds running in the mikrotik but can't pass traffic.
Any ideals how it can be done ?
is it possible?
Thanks

Is your ap outside or inside ?
how far is the wall from your AP?
normally the range will depend on
1.material the wall is made of.
2.the position of your setup.
3. interference from other network.
with 2.4 in mind.

upgrade and post your configuration
the gurus might see what is wrong and help you fix.
thanks

save you configuration.
and reset the system to default.
then apply the configuration one after the other.
The might help you isolate the problem.
it is due to an old syntax.

configure nat

merry christmas

l wish all forum members merry christmas and a happy new year.
thanks for your support in the past year .An hope for more powerful and stable rb and v3.0

l wish all forum members merry christmas and a happy new year.
thanks for your support in the past year .An hope for more powerful and stable rb and v3.0

Please get yourself new version.
and upgrade the problem will be solved.
whyaskgh

Am currently running wireless links on piii 1000 but want to switch to rb333 or rb600.

l currently have very stable network but want to expand to new areas with router board .

Please which is best or faster for wireless link
P IV
P III
Rb 333
Rb 600

Thanks

Dear All

Please can you kindly explain rb333 and p3 1000ghz which is faster.
it is said that 333 is 3 times faster than rb500 .will it mean that rb 333 is have 999ghz in normal computering.

Help am confused.
it is said that rb 1000 is also faster than all P IV .
Best regards

thanks for you response
l tried using the syntax as in 2.9 but it's not possible with 3.0.
can you show me a sample command line to block all mp3 files.
thanks

Dear all
Please can someone help me with blocking of files with extension exe or mp3 in webproxy 3.0
thank

Dear Mikrotik family
Has any body tested this Wistron DCMA-82 SuperAG 400mW 108Mb on mikrotik boards before.
How is this different from r52h.
Thanks

Dear all
Can someone help by telling me how many wds can a wirless interface take and also how many can a p3 800mhz pc with
3.o4r take.
Thanks

And how do you use the time out and keepalive to do that
Thanks

so please how can l generate the even and odd list automatically
or do load balancing

Dear All
the nth=1,1,0 for adding odd address to the address list is not work in 3.o
but the even works
any help