MikroTik

waver

Dear all,

After 11 years working with Mikrotik on Windows i started to work with MAC OS. Anyone know how can change the Winbox icon to avoid wine icon? is it possible? I would like still original icon for the app.

Thanks!

waver

Does your radius supports pool for dynamic addresses?

Works with "Daloradius" but the problem is Mikrotik router, if isn't device who assign the IP don't mark as used....

waver

Reduce the pool size to leave some non-overlapping addresses available for static allocation. Also, you can assign the IP address with the Framed-IP-Address RADIUS attribute, which overrides remote-address in the PPP profile, instead of creating local secrets. Yes, if i reduce de pool and reserve a...

waver

Dear all, We are working to power on new PPPoE Server. The first test show problem to fix IP for client: - The scenario is the next: The users validation are with Radius and works fine. The IP is assigned from pool and all clients receive ok. If client request fixed IP we configure the secret on loc...

waver

I trying to implement IPv6 in our ISP network. BGP with peer is ok and OSPFv3 works fine between Edge routers but DHCP Server from Edge routers to Clients routers doesn't works. On the Edge Router, DHCP Server show "bound" but on Client router DHCP client always "searching" don't...

waver

Dear all,

Anyone have the solution description? we are very interested on this.

Thanks a lot,

waver

Don't have anyone any response? I think on other firewalls, when the VPN is up, this firewall can send static routes to client (windows). If it not possible on Mikrotik maybe can configure dynamic routes on itself

Thanks,

waver

Dear all, On this time we needed to build a lot of VPN services, all works fine but the people, has your PC's with P2Ps software installed, for this, i think the best solution are that redirect the public IP traffic to the origin. This point is very simple, we can configure a static route on the loc...

waver

Dear all, We are work with an ISP schema with client routers and edge routers and we need to drop connections from clients if: - More than 5 connections from same port. Anyone have idea how can i configure this? When we think about this only found one solution: Configure this rule for each port (thi...

waver

Isn't it much better and safer to use /interface set [find name="interfacename"] xxxx ? also, why not just "/interface set interfacename xxxx"? :D Yes, this is the better solution, and works fine but repeat, this post is only to present a "possible" bug on firmware. Th...

waver

Hi!

Las week i discovered the solution!

I think the problem is (in my case) dynamic WAN IP because the solution is a NAT! I tried to configure NAT to internal router IP on port 445 and works fine over the world!

I hope this post help to anyone,

waver

Hi to all, I have a little problem with SMB on RB951 with 6.36 The SMB works fine on LAN and other interfaces but no on WAN interface (in my case is a PPPoE client named "Telefonica_Data"). When i activate the SMB, the log show this list of interfaces and address activated but i don't see ...

waver

Sorry, but i don't say if i works with numbers i only say the "problem" and the question is, this is a "bug"? only.

I work every day with rOS and i know the best practises and proper solutions, this post is only to show a possible bug.

Thanks,

waver

Yes, i know but i think so it's a bug. It's possible?

waver

Dear all, We are working for a new VRRP project and found a "inexplicable" error :? I have 2 CCR1009-8G-1S-1S+ configured with VRRP, two WAN's, all ok. On a second router we configured a "netwatch" to enable or disable a "PPPoE" interface and this is the problem. The &q...

waver

Finally,

After every days with the problem i could update de RB without any special action... I tried to reboot and after few seconds, when i log in i see the new version.

I show the log after reboot:

Thanks for the support.

waver

Hi to all, I have problems with RB1100: When i copy the new *.npk file and reboot the system, the RB no apply any changes on the system. To ensure the file is correct i tried to update from "system/package" and found the same problem. I see 0.6% bad blocks :? on resources... I try with 6.3...

waver

Hi to all, We have a problem with a few edge routers with OSPF. Our network is configured with 40 routers and found problems on 3 or 4. We don't know, every few days this routers have more than 1000 or 2000 state changes a lot of messages on log how: "Ignoring Link State Acknowledgement packet:...

waver

Hi,

Finally, the problem is solved with upgrading to 6.15 and exclude the last ethernet port to the bridge.

Thank you!!

waver

Hello to you all! I have 4 wans I want to use for my hotspot wan1 = 12mbps unlimited bandwith plan wan2 = 4mbps limited quota wan3 = 4mbps limited quota wan4 = 4mbps limited quota I have simple queue where each user will get 512kbps bandwith. I don't want to balance the load between all 4 wans, I w...

waver

Hi!, We have a CCR works in a simple network with 20 AP's (Ruckus). The CCR function is DHCP and NAT, only one network. We configured the "best practises" on Firewall and bridge with "rstp" betwen ports 2 to 10. Sometimes, from device connect to router (cable), the router not res...

waver

Hi, A client works with VPN. They have a server on a one end of tunnel and their network on the second end of tunnel. Works fine between this VPN. but the problem is: - If i configure NAT redirection to server across the VPN this not work... how is possible? The routes is ok, IP's ok and ports ok. A...

waver

Good news! Today, the VPN don't works but i checked connection with "Traversal NAT" and SURPRISE! works fine. After i change this option and deactivate this check. I attempt to reconnect the VPN without "Traversal NAT" and works... I don't understand because after upgrade found a...

waver

Hi,

Today i upgrade one router. This router had configured L2tP VPN's and works fine with versions 6.7/6.8 and 6.9 but with 6.10/6.11 don't works!!!

The configuration is the same. Any idea?

Thank you!

The client connect with MS Windows directly.

waver

Hi,

Today i upgrade one router. This router had configured L2tP VPN's and works fine with versions 6.7/6.8 and 6.9 but with 6.10/6.11 don't works!!!

The configuration is the same. Any idea?

Thank you!

waver

Was found the problem.

If not connect to internet, captive portal is not displayed!

Thank you!

waver

Hi, Yesterday i was configure a Hotspot but i have a problem. When finish all configuration, open a web browser but no displayed de captive portal :shock: I test with a different hardware, RB951G, RB750, RB411A and diferent firmware's 3.30, 5.25 and 6.7. Someone has idea what can be the problem??? I...

waver

Same problem with RB751G-2HnD v.6.6 but only failure when ppts or sstp is server, works fine with PPtP client.....

waver

Fantastic.

waver

Let Say Router A have 3 clients on eth1 port with x.x.x.x, y.y.y.y, z.z.z.z public ip and eth1 port have t.t.t.t public ip which is acting as gateway for internal network. now eth2 of router A connected with ISP Router which is Router B's eth1 with a /30 subnet. now i want to know the router B's co...

waver

Sorry for delay.

This option is in "Acces" menu, "webproxy" inside.

waver

Hello :) i have a company and i want to block all pornographic addresses and social addresses. i know how to block one address but not some of them. i have blocked in firewall but i dont know hot to block not one but a lot of websites. E.g. i have a list and there are 120 websites on it... how to b...

waver

Hi, I'm trying to copy the upgrade package into the files list by dragging and dropping as I would with any of the many Mikrotiks I manage. However when trying with one particular Mikrotik running 5.20 I get: "Could not download file - write failed (6)" The user account I am logged onto t...

waver

Hi, I have a fiber connection with my internet ISP. It uses a GPON interface and then a specific proprietary router that is really bad (Livebox) so I’d like to use mi Mikrotik router. I need to setup one of my Ethernet port on VLAN 835 and with PPoE/LLC protocol (I have login/pass to use for PPoE) ...

waver

I have a RB2011 works fine with 500-600 clients, queues, firewall rules and every networks. This model is very versatile. Can you check the performance? With your connections and configuration the CPU and memory should not be overloaded. You can check without track connections. This option makes wor...

waver

Yes, I found the same problem but works fine. Although you don't see the secrets, in my case, the clients can connect to VPN's without problems. Then, if i close Winbox, and then reopen, the secrets is here. I detect the same problem with the ROUTES!!! this morning i don't saw the ip/routes, reebot ...

waver

Hi, What device are you using? maybe is poor for your network. How many connections have? If you use a RB750 with 200 clients, you need a total throughput very high and this RB maybe works over your limit. Use "queue's"? A lot of Firewall rules? I agree with "leonset", cheks the ...

waver

What i have here is 1 interface connected to the internet and the other to all my clients (/16) for the config you shared with me i used just the ip of my server as a case study using the Internet intrface as both in and out interfaces in the 2 nat rules However i still get my routers ip and not th...

waver

If you would like pass the public IP to your client, significate the Mikrotik is conected to internet. Have a interface for connect to internet (Is this interface you have to set in this option, same input and output) and other interface for connect to your client (in this interface configure a litt...

waver

Hi, You need rule NAT: First is pass the publi IP to your client. For this, configure chain: dstnat Source address: 0.0.0.0/0 Destination addres: your client public IP Input interface: your interface from internet Action: dst-nat To address: your client IP address (no public, for example 192.168.20...

waver

Hi, You need rule NAT: First is pass the publi IP to your client. For this, configure chain: dstnat Source address: 0.0.0.0/0 Destination addres: your client public IP Input interface: your interface from internet Action: dst-nat To address: your client IP address (no public, for example 192.168.200...

waver

Hi!

The question is: how many connections is "normal" for host??? And if the host works with http://grooveshark.com/???

Now i going to limit the connections but i don't know how many needed for host in this LAN.

Thank you!!!

waver

Well, packets bigger than the MTU should be fragmented and sent anyway, not dropped. What is the MTU size on the LNS side for that connection? What if you ping with 1700 as size? The MTU or MRU size on LNS side i don't know because is DSL connection, and i don't know how ISP works with this configu...

waver

Is possible configure the MRRU for receive the different packet size?

I don't know really the function of MRRU.

If i configure MRRU to 65535, is possible navigate correctly to every webpage's?

Thank you,

waver

Hi have you tested the different packet sizes with ICMP to see if they go through? As I said in my opinion there must be some packet sizes which are not fragmented nor passed through. Yes, now i tested the different packet sizes, and the maximun size for response is 1455 bytes, is very poor! If i c...

waver

Hi,

Now, when connection is established don't lost the manual MRU/MTU configuration but the connection don't works fine, Continuous without works whit some webpages

Any more idea? My client is desperate

waver

Hi Waver I had a similar issue with some FTTC connections, and I found out it was an MTU problem. To troubleshoot this I would suggest you try pings with different sizes from the Mikrotik and to the Mikrotik from another location across the WAN link. In my case packets with size=1455 and 1456 bytes...

waver

Hi! Sorry for no response in all this time. Yesterday I found the same problemin other location, with other RB model, last firmware version and different public IP. :shock: The RB configuration is ok, i'm sure but i don't understand how i check the webpage wih ping, this is ok but no download the we...

waver

Which RouterOS version is this? The last version v5.25. You should be more specific about "don't work". What is the web browser response when you try wikipedia? Add: Have you tried loading wikipedia avoiding all the "permanently moved" stuff? http://en.wikipedia.org/wiki/Main_Pa...

waver

google.com works fine but wikipedia.com don't work...
And the other 2 sites I mentioned?

Hi,

Your 3 websites works fine.

I'm lost with this problem...

waver

Thank you for a response Perhaps the public IP address ends with a zero, some equipment does not accept an address that ends with a zero. No, the public IP address ends with 32. This problem (ends with 0) is with all RB products? Which sites work of: http://www.google.com http://www.yahoo.com http:/...

waver

What version of RouterOS you use? same thing happens to me. all pppoe clients disconnect and after a few secconds they come online again. hotspot users stay connected on the same router. the whole config was running for years on a x86 platform. any ideas? I understand you have two client types, PPPo...

waver

Hi! We have a little problema on client installation. This client have a ADSL connection with dynamic IP. I have a modem router with bridge mode configuration and behind RB750 for PPPoE marking. This configuration works fine but is impossible navigate to some web page's. Is possible the problem are ...

Search found 53 matches