I understood my mistake, I have to specify all my routes for the "route-thru-wan2" mark too. I've added thеsе rules and everything got okay for 100.64.25.2 and for the rest of LAN-side (192.168.0.0/16): add distance=7 dst-address=100.64.25.2/32 gateway=my-pptp-server routing-mark=route-thr...

Hello. I'm trying to route some networks that I have in address-list "route-thru-wan2" thru WAN2. I already have a LAN-side network, WAN and WAN2 networks that set up correctly. It works perfect, if WAN route is unreachable, WAN2 works instead. What I have done now: /ip firewall mangle pri...

It's recovery mode, as described here - https://wiki.mikrotik.com/wiki/SwOS#Rei ... S_firmware

I have RB260GS that worked for a year. In one day, the switch has dropped all its smart features and turned into dumb switch. I tried restore firmware thru TFTP and got interesting message in RouterOS log feb/25 00:12:31 dhcp,info dhcp1 assigned 10.0.0.254 to 00:00:00:00:01:01 The switch now have MA...

Hello. That's not secret that many people use web-proxy like small web server, you can just deny access to all and edit error.html page. But that's only one page and often more than one needed. Right now you can specify multiply ports for web-proxy. It may use in conditions inside error.html: if it'...

Up.

Up.

Sometimes I get this Sansлджлджtitre.png That completely destroy the network - all users drop connection to Internet every 3 seconds. All passwords on all of this routers are right! I have 4 routers on RouterOS (3 mipsbe, 1 tile) with 6 same VRRP interfaces on each one. Firmware 6.32.2 on each one. ...

Thanks for advices, SystemErrorMessage.
I dont have DDoS now, but I have some consequences.
I think something in hardware is broken. I've checked whole config - everything is fine. But my router goes crazy when I'm trying to adding some rule in firewall or when traffic flow thru some firewall rules.

I noticed that adding a rule into firewall make the router crazy. Any work with firewall rules can make my router crazy.
Can it be some breakage of memory?

Hello! I got DDoS on my router (RB751G-2hnd) from ether1 port. I could fix it only after 10 hours of DDoS by adding a rule into firewall. All of this time router had 100% loaded CPU. After this on ports with 192.168/16 subnet: 1. Router response on only 1 of 20-30 pings with 2000-3000ms time. 2. Win...

I have error when I'm trying to get hosts list.
In source code I saw cause of the bug.
HTTP headers and body of !dhost.b are doubled.

Unfortunately, I didn't take a screenshot - after reboot the problem is disappear.

You can do this remotly - http://switch_ip/reboot Thanks! I already rebooted the switch manually. But switch doesn't reboot by GET request, firmware version 1.9. After request I see this {µж¤Ґ:[0x00,0x00,0x00,0x00,0x00], •ЃЌ,¤:[0x72,0x2d,0x41,0x67,0x65],Ђ„х•:[0x786574203a7470656363410a0d3034322e383...

I found answer - http://forum.mikrotik.com/viewtopic.php?f=17&t=72106#p366699 problem which can be observed during changing between old and new Web GUI design But I already had new Web GUI. I will try power cycle, but it's hard when switch is in hard-to-reach place and far from me. Please, fix t...

Hello! I upgraded my RB250GS from 1.8 to 1.9 and got this in browser: http://i47.fastpic.ru/big/2013/0519/a2/9e1da559e50cd6a5ebbcf0ead8de02a2.png Switch has firmware version 1.8 in Winbox: http://i46.fastpic.ru/big/2013/0519/7b/4f5d469ca068ef240b415ef4b243e77b.png Now it is irretrievably an unmanage...